38 lines
1.3 KiB
ReStructuredText
38 lines
1.3 KiB
ReStructuredText
.. _bluetooth-hci-pwr-ctrl-sample:
|
|
|
|
Bluetooth: HCI Power Control
|
|
############################
|
|
|
|
Overview
|
|
********
|
|
|
|
This sample application demonstrates the dynamic Tx power control over the LL
|
|
of the BLE controller via Zephyr HCI VS commands. The application implements a
|
|
peripheral advertising with varying Tx power. The initial advertiser TX power
|
|
for the first 5s of the application is the Kconfig set default TX power. Then,
|
|
the TX power variation of the advertiser is a repeatedly descending staircase
|
|
pattern ranging from -4 dBm to -30 dBm where the Tx power levels decrease every
|
|
5s.
|
|
|
|
Upon sucessful connection, the connection RSSI strength is being monitored and
|
|
the Tx power of the peripheral device is modulated per connection accordingly
|
|
such that energy is being saved depending on how powerful the RSSI of the
|
|
connection is. The peripheral implements a simple GATT profile exposing the
|
|
HR service notifying connected centrals about a dummy HR each 2s.
|
|
|
|
Requirements
|
|
************
|
|
|
|
* BlueZ running on the host, or
|
|
* A board with BLE support
|
|
* A central device & monitor (e.g. nRF Connect) to check the RSSI values
|
|
obtained from the peripheral.
|
|
|
|
Building and Running
|
|
********************
|
|
|
|
This sample can be found under :zephyr_file:`samples/bluetooth/hci_pwr_ctrl`
|
|
in the Zephyr tree.
|
|
|
|
See :ref:`bluetooth samples section <bluetooth-samples>` for details.
|