394 lines
10 KiB
C
394 lines
10 KiB
C
/*
|
|
* Copyright (c) 2016 BayLibre, SAS
|
|
* Copyright (c) 2017 Linaro Ltd
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
|
|
#include <clock_control/stm32_clock_control.h>
|
|
#include <clock_control.h>
|
|
#include <misc/util.h>
|
|
#include <kernel.h>
|
|
#include <board.h>
|
|
#include <errno.h>
|
|
#include <i2c.h>
|
|
#include "i2c_ll_stm32.h"
|
|
|
|
#define LOG_LEVEL CONFIG_I2C_LOG_LEVEL
|
|
#include <logging/log.h>
|
|
LOG_MODULE_REGISTER(i2c_ll_stm32);
|
|
|
|
#include "i2c-priv.h"
|
|
|
|
int i2c_stm32_runtime_configure(struct device *dev, u32_t config)
|
|
{
|
|
const struct i2c_stm32_config *cfg = DEV_CFG(dev);
|
|
struct i2c_stm32_data *data = DEV_DATA(dev);
|
|
I2C_TypeDef *i2c = cfg->i2c;
|
|
u32_t clock = 0;
|
|
|
|
#if defined(CONFIG_SOC_SERIES_STM32F3X) || defined(CONFIG_SOC_SERIES_STM32F0X)
|
|
LL_RCC_ClocksTypeDef rcc_clocks;
|
|
|
|
/*
|
|
* STM32F0/3 I2C's independent clock source supports only
|
|
* HSI and SYSCLK, not APB1. We force clock variable to
|
|
* SYSCLK frequency.
|
|
*/
|
|
LL_RCC_GetSystemClocksFreq(&rcc_clocks);
|
|
clock = rcc_clocks.SYSCLK_Frequency;
|
|
#else
|
|
clock_control_get_rate(device_get_binding(STM32_CLOCK_CONTROL_NAME),
|
|
(clock_control_subsys_t *) &cfg->pclken, &clock);
|
|
#endif /* CONFIG_SOC_SERIES_STM32F3X) || CONFIG_SOC_SERIES_STM32F0X */
|
|
|
|
data->dev_config = config;
|
|
|
|
LL_I2C_Disable(i2c);
|
|
LL_I2C_SetMode(i2c, LL_I2C_MODE_I2C);
|
|
|
|
return stm32_i2c_configure_timing(dev, clock);
|
|
}
|
|
|
|
#define OPERATION(msg) (((struct i2c_msg *) msg)->flags & I2C_MSG_RW_MASK)
|
|
|
|
static int i2c_stm32_transfer(struct device *dev, struct i2c_msg *msg,
|
|
u8_t num_msgs, u16_t slave)
|
|
{
|
|
#if defined(CONFIG_I2C_STM32_V1)
|
|
const struct i2c_stm32_config *cfg = DEV_CFG(dev);
|
|
I2C_TypeDef *i2c = cfg->i2c;
|
|
#endif
|
|
struct i2c_msg *current, *next;
|
|
int ret = 0;
|
|
|
|
/* Check for validity of all messages, to prevent having to abort
|
|
* in the middle of a transfer
|
|
*/
|
|
current = msg;
|
|
|
|
/*
|
|
* Set I2C_MSG_RESTART flag on first message in order to send start
|
|
* condition
|
|
*/
|
|
current->flags |= I2C_MSG_RESTART;
|
|
|
|
for (u8_t i = 1; i <= num_msgs; i++) {
|
|
/* Maximum length of a single message is 255 Bytes */
|
|
if (current->len > 255) {
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
|
|
if (i < num_msgs) {
|
|
next = current + 1;
|
|
|
|
/*
|
|
* Restart condition between messages
|
|
* of different directions is required
|
|
*/
|
|
if (OPERATION(current) != OPERATION(next)) {
|
|
if (!(next->flags & I2C_MSG_RESTART)) {
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* Stop condition is only allowed on last message */
|
|
if (current->flags & I2C_MSG_STOP) {
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
} else {
|
|
/* Stop condition is required for the last message */
|
|
current->flags |= I2C_MSG_STOP;
|
|
}
|
|
|
|
current++;
|
|
}
|
|
|
|
if (ret) {
|
|
return ret;
|
|
}
|
|
|
|
/* Send out messages */
|
|
#if defined(CONFIG_I2C_STM32_V1)
|
|
LL_I2C_Enable(i2c);
|
|
#endif
|
|
|
|
current = msg;
|
|
|
|
while (num_msgs > 0) {
|
|
u8_t *next_msg_flags = NULL;
|
|
|
|
if (num_msgs > 1) {
|
|
next = current + 1;
|
|
next_msg_flags = &(next->flags);
|
|
}
|
|
|
|
if ((current->flags & I2C_MSG_RW_MASK) == I2C_MSG_WRITE) {
|
|
ret = stm32_i2c_msg_write(dev, current, next_msg_flags,
|
|
slave);
|
|
} else {
|
|
ret = stm32_i2c_msg_read(dev, current, next_msg_flags,
|
|
slave);
|
|
}
|
|
|
|
if (ret < 0) {
|
|
break;
|
|
}
|
|
|
|
current++;
|
|
num_msgs--;
|
|
};
|
|
#if defined(CONFIG_I2C_STM32_V1)
|
|
LL_I2C_Disable(i2c);
|
|
#endif
|
|
return ret;
|
|
}
|
|
|
|
static const struct i2c_driver_api api_funcs = {
|
|
.configure = i2c_stm32_runtime_configure,
|
|
.transfer = i2c_stm32_transfer,
|
|
#if defined(CONFIG_I2C_SLAVE) && defined(CONFIG_I2C_STM32_V2)
|
|
.slave_register = i2c_stm32_slave_register,
|
|
.slave_unregister = i2c_stm32_slave_unregister,
|
|
#endif
|
|
};
|
|
|
|
static int i2c_stm32_init(struct device *dev)
|
|
{
|
|
struct device *clock = device_get_binding(STM32_CLOCK_CONTROL_NAME);
|
|
const struct i2c_stm32_config *cfg = DEV_CFG(dev);
|
|
u32_t bitrate_cfg;
|
|
int ret;
|
|
#ifdef CONFIG_I2C_STM32_INTERRUPT
|
|
struct i2c_stm32_data *data = DEV_DATA(dev);
|
|
|
|
k_sem_init(&data->device_sync_sem, 0, UINT_MAX);
|
|
cfg->irq_config_func(dev);
|
|
#endif
|
|
|
|
__ASSERT_NO_MSG(clock);
|
|
clock_control_on(clock, (clock_control_subsys_t *) &cfg->pclken);
|
|
|
|
#if defined(CONFIG_SOC_SERIES_STM32F3X) || defined(CONFIG_SOC_SERIES_STM32F0X)
|
|
/*
|
|
* STM32F0/3 I2C's independent clock source supports only
|
|
* HSI and SYSCLK, not APB1. We force I2C clock source to SYSCLK.
|
|
* I2C2 on STM32F0 uses APB1 clock as I2C clock source
|
|
*/
|
|
|
|
switch ((u32_t)cfg->i2c) {
|
|
#ifdef CONFIG_I2C_1
|
|
case CONFIG_I2C_1_BASE_ADDRESS:
|
|
LL_RCC_SetI2CClockSource(LL_RCC_I2C1_CLKSOURCE_SYSCLK);
|
|
break;
|
|
#endif /* CONFIG_I2C_1 */
|
|
|
|
#if defined(CONFIG_SOC_SERIES_STM32F3X) && defined(CONFIG_I2C_2)
|
|
case CONFIG_I2C_2_BASE_ADDRESS:
|
|
LL_RCC_SetI2CClockSource(LL_RCC_I2C2_CLKSOURCE_SYSCLK);
|
|
break;
|
|
#endif /* CONFIG_SOC_SERIES_STM32F3X && CONFIG_I2C_2 */
|
|
|
|
#ifdef CONFIG_I2C_3
|
|
case CONFIG_I2C_3_BASE_ADDRESS:
|
|
LL_RCC_SetI2CClockSource(LL_RCC_I2C3_CLKSOURCE_SYSCLK);
|
|
break;
|
|
#endif /* CONFIG_I2C_3 */
|
|
}
|
|
#endif /* CONFIG_SOC_SERIES_STM32F3X) || CONFIG_SOC_SERIES_STM32F0X */
|
|
|
|
bitrate_cfg = _i2c_map_dt_bitrate(cfg->bitrate);
|
|
|
|
ret = i2c_stm32_runtime_configure(dev, I2C_MODE_MASTER | bitrate_cfg);
|
|
if (ret < 0) {
|
|
LOG_ERR("i2c: failure initializing");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_I2C_1
|
|
|
|
#ifdef CONFIG_I2C_STM32_INTERRUPT
|
|
static void i2c_stm32_irq_config_func_1(struct device *port);
|
|
#endif
|
|
|
|
static const struct i2c_stm32_config i2c_stm32_cfg_1 = {
|
|
.i2c = (I2C_TypeDef *)CONFIG_I2C_1_BASE_ADDRESS,
|
|
.pclken = {
|
|
.enr = LL_APB1_GRP1_PERIPH_I2C1,
|
|
.bus = STM32_CLOCK_BUS_APB1,
|
|
},
|
|
#ifdef CONFIG_I2C_STM32_INTERRUPT
|
|
.irq_config_func = i2c_stm32_irq_config_func_1,
|
|
#endif
|
|
.bitrate = CONFIG_I2C_1_BITRATE,
|
|
};
|
|
|
|
static struct i2c_stm32_data i2c_stm32_dev_data_1;
|
|
|
|
DEVICE_AND_API_INIT(i2c_stm32_1, CONFIG_I2C_1_NAME, &i2c_stm32_init,
|
|
&i2c_stm32_dev_data_1, &i2c_stm32_cfg_1,
|
|
POST_KERNEL, CONFIG_KERNEL_INIT_PRIORITY_DEVICE,
|
|
&api_funcs);
|
|
|
|
#ifdef CONFIG_I2C_STM32_INTERRUPT
|
|
static void i2c_stm32_irq_config_func_1(struct device *dev)
|
|
{
|
|
#ifdef CONFIG_I2C_STM32_COMBINED_INTERRUPT
|
|
IRQ_CONNECT(CONFIG_I2C_1_COMBINED_IRQ, CONFIG_I2C_1_COMBINED_IRQ_PRI,
|
|
stm32_i2c_combined_isr, DEVICE_GET(i2c_stm32_1), 0);
|
|
irq_enable(CONFIG_I2C_1_COMBINED_IRQ);
|
|
#else
|
|
IRQ_CONNECT(CONFIG_I2C_1_EVENT_IRQ, CONFIG_I2C_1_EVENT_IRQ_PRI,
|
|
stm32_i2c_event_isr, DEVICE_GET(i2c_stm32_1), 0);
|
|
irq_enable(CONFIG_I2C_1_EVENT_IRQ);
|
|
|
|
IRQ_CONNECT(CONFIG_I2C_1_ERROR_IRQ, CONFIG_I2C_1_ERROR_IRQ_PRI,
|
|
stm32_i2c_error_isr, DEVICE_GET(i2c_stm32_1), 0);
|
|
irq_enable(CONFIG_I2C_1_ERROR_IRQ);
|
|
#endif
|
|
}
|
|
#endif
|
|
|
|
#endif /* CONFIG_I2C_1 */
|
|
|
|
#ifdef CONFIG_I2C_2
|
|
|
|
#ifdef CONFIG_I2C_STM32_INTERRUPT
|
|
static void i2c_stm32_irq_config_func_2(struct device *port);
|
|
#endif
|
|
|
|
static const struct i2c_stm32_config i2c_stm32_cfg_2 = {
|
|
.i2c = (I2C_TypeDef *)CONFIG_I2C_2_BASE_ADDRESS,
|
|
.pclken = {
|
|
.enr = LL_APB1_GRP1_PERIPH_I2C2,
|
|
.bus = STM32_CLOCK_BUS_APB1,
|
|
},
|
|
#ifdef CONFIG_I2C_STM32_INTERRUPT
|
|
.irq_config_func = i2c_stm32_irq_config_func_2,
|
|
#endif
|
|
.bitrate = CONFIG_I2C_2_BITRATE,
|
|
};
|
|
|
|
static struct i2c_stm32_data i2c_stm32_dev_data_2;
|
|
|
|
DEVICE_AND_API_INIT(i2c_stm32_2, CONFIG_I2C_2_NAME, &i2c_stm32_init,
|
|
&i2c_stm32_dev_data_2, &i2c_stm32_cfg_2,
|
|
POST_KERNEL, CONFIG_KERNEL_INIT_PRIORITY_DEVICE,
|
|
&api_funcs);
|
|
|
|
#ifdef CONFIG_I2C_STM32_INTERRUPT
|
|
static void i2c_stm32_irq_config_func_2(struct device *dev)
|
|
{
|
|
#ifdef CONFIG_I2C_STM32_COMBINED_INTERRUPT
|
|
IRQ_CONNECT(CONFIG_I2C_2_COMBINED_IRQ, CONFIG_I2C_2_COMBINED_IRQ_PRI,
|
|
stm32_i2c_combined_isr, DEVICE_GET(i2c_stm32_2), 0);
|
|
irq_enable(CONFIG_I2C_2_COMBINED_IRQ);
|
|
#else
|
|
IRQ_CONNECT(CONFIG_I2C_2_EVENT_IRQ, CONFIG_I2C_2_EVENT_IRQ_PRI,
|
|
stm32_i2c_event_isr, DEVICE_GET(i2c_stm32_2), 0);
|
|
irq_enable(CONFIG_I2C_2_EVENT_IRQ);
|
|
|
|
IRQ_CONNECT(CONFIG_I2C_2_ERROR_IRQ, CONFIG_I2C_2_ERROR_IRQ_PRI,
|
|
stm32_i2c_error_isr, DEVICE_GET(i2c_stm32_2), 0);
|
|
irq_enable(CONFIG_I2C_2_ERROR_IRQ);
|
|
#endif
|
|
}
|
|
#endif
|
|
|
|
#endif /* CONFIG_I2C_2 */
|
|
|
|
#ifdef CONFIG_I2C_3
|
|
|
|
#ifndef I2C3_BASE
|
|
#error "I2C_3 is not available on the platform that you selected"
|
|
#endif /* I2C3_BASE */
|
|
|
|
#ifdef CONFIG_I2C_STM32_INTERRUPT
|
|
static void i2c_stm32_irq_config_func_3(struct device *port);
|
|
#endif
|
|
|
|
static const struct i2c_stm32_config i2c_stm32_cfg_3 = {
|
|
.i2c = (I2C_TypeDef *)CONFIG_I2C_3_BASE_ADDRESS,
|
|
.pclken = {
|
|
.enr = LL_APB1_GRP1_PERIPH_I2C3,
|
|
.bus = STM32_CLOCK_BUS_APB1,
|
|
},
|
|
#ifdef CONFIG_I2C_STM32_INTERRUPT
|
|
.irq_config_func = i2c_stm32_irq_config_func_3,
|
|
#endif
|
|
.bitrate = CONFIG_I2C_3_BITRATE,
|
|
};
|
|
|
|
static struct i2c_stm32_data i2c_stm32_dev_data_3;
|
|
|
|
DEVICE_AND_API_INIT(i2c_stm32_3, CONFIG_I2C_3_NAME, &i2c_stm32_init,
|
|
&i2c_stm32_dev_data_3, &i2c_stm32_cfg_3,
|
|
POST_KERNEL, CONFIG_KERNEL_INIT_PRIORITY_DEVICE,
|
|
&api_funcs);
|
|
|
|
#ifdef CONFIG_I2C_STM32_INTERRUPT
|
|
static void i2c_stm32_irq_config_func_3(struct device *dev)
|
|
{
|
|
IRQ_CONNECT(CONFIG_I2C_3_EVENT_IRQ, CONFIG_I2C_3_EVENT_IRQ_PRI,
|
|
stm32_i2c_event_isr, DEVICE_GET(i2c_stm32_3), 0);
|
|
irq_enable(CONFIG_I2C_3_EVENT_IRQ);
|
|
|
|
IRQ_CONNECT(CONFIG_I2C_3_ERROR_IRQ, CONFIG_I2C_3_ERROR_IRQ_PRI,
|
|
stm32_i2c_error_isr, DEVICE_GET(i2c_stm32_3), 0);
|
|
irq_enable(CONFIG_I2C_3_ERROR_IRQ);
|
|
}
|
|
#endif
|
|
|
|
#endif /* CONFIG_I2C_3 */
|
|
|
|
#ifdef CONFIG_I2C_4
|
|
|
|
#ifndef I2C4_BASE
|
|
#error "I2C_4 is not available on the platform that you selected"
|
|
#endif /* I2C4_BASE */
|
|
|
|
#ifdef CONFIG_I2C_STM32_INTERRUPT
|
|
static void i2c_stm32_irq_config_func_4(struct device *port);
|
|
#endif
|
|
|
|
static const struct i2c_stm32_config i2c_stm32_cfg_4 = {
|
|
.i2c = (I2C_TypeDef *)CONFIG_I2C_4_BASE_ADDRESS,
|
|
.pclken = {
|
|
.enr = LL_APB1_GRP2_PERIPH_I2C4,
|
|
.bus = STM32_CLOCK_BUS_APB1_2,
|
|
},
|
|
#ifdef CONFIG_I2C_STM32_INTERRUPT
|
|
.irq_config_func = i2c_stm32_irq_config_func_4,
|
|
#endif
|
|
.bitrate = CONFIG_I2C_4_BITRATE,
|
|
};
|
|
|
|
static struct i2c_stm32_data i2c_stm32_dev_data_4;
|
|
|
|
DEVICE_AND_API_INIT(i2c_stm32_4, CONFIG_I2C_4_NAME, &i2c_stm32_init,
|
|
&i2c_stm32_dev_data_4, &i2c_stm32_cfg_4,
|
|
POST_KERNEL, CONFIG_KERNEL_INIT_PRIORITY_DEVICE,
|
|
&api_funcs);
|
|
|
|
#ifdef CONFIG_I2C_STM32_INTERRUPT
|
|
static void i2c_stm32_irq_config_func_4(struct device *dev)
|
|
{
|
|
IRQ_CONNECT(CONFIG_I2C_4_EVENT_IRQ, CONFIG_I2C_4_EVENT_IRQ_PRI,
|
|
stm32_i2c_event_isr, DEVICE_GET(i2c_stm32_4), 0);
|
|
irq_enable(CONFIG_I2C_4_EVENT_IRQ);
|
|
|
|
IRQ_CONNECT(CONFIG_I2C_4_ERROR_IRQ, CONFIG_I2C_4_ERROR_IRQ_PRI,
|
|
stm32_i2c_error_isr, DEVICE_GET(i2c_stm32_4), 0);
|
|
irq_enable(CONFIG_I2C_4_ERROR_IRQ);
|
|
}
|
|
#endif
|
|
|
|
#endif /* CONFIG_I2C_4 */
|
|
|