1182 lines
33 KiB
Plaintext
1182 lines
33 KiB
Plaintext
# Copyright 2022-2024 NXP
|
|
# SPDX-License-Identifier: Apache-2.0
|
|
|
|
menuconfig WIFI_NXP
|
|
bool "NXP Wi-Fi driver support"
|
|
select NET_L2_WIFI_MGMT if NETWORKING
|
|
select WIFI_USE_NATIVE_NETWORKING if NETWORKING
|
|
select NET_L2_ETHERNET_MGMT if NETWORKING && NET_L2_ETHERNET
|
|
select SDHC if !SOC_SERIES_RW6XX
|
|
select SDIO_STACK if !SOC_SERIES_RW6XX
|
|
select WIFI_NM if WIFI_NM_WPA_SUPPLICANT
|
|
depends on DT_HAS_NXP_WIFI_ENABLED
|
|
help
|
|
Enable NXP SoC Wi-Fi support.
|
|
|
|
if WIFI_NXP
|
|
|
|
module = WIFI_NXP
|
|
|
|
config WIFI_MGMT_SCAN_CHAN_MAX_MANUAL
|
|
default 50
|
|
|
|
config NXP_WIFI_CUSTOM
|
|
bool "Custom NXP Wi-Fi part"
|
|
help
|
|
Customize NXP Wi-Fi chip support.
|
|
|
|
choice NXP_WIFI_PART
|
|
prompt "Select NXP Wi-Fi part"
|
|
depends on !NXP_WIFI_CUSTOM
|
|
help
|
|
Choose NXP Wi-Fi chip support.
|
|
|
|
config NXP_RW610
|
|
bool "NXP RW610-based Chipset"
|
|
depends on SOC_SERIES_RW6XX
|
|
select NXP_FW_LOADER
|
|
select NXP_RF_IMU
|
|
help
|
|
Select this option if you have a NXP RW610-based
|
|
Wireless chip. This option will enable support
|
|
for NXP RW610-based series boards.
|
|
|
|
config NXP_88W8987
|
|
bool "NXP 88W8987 [EXPERIMENTAL]"
|
|
select EXPERIMENTAL
|
|
help
|
|
Enable NXP 88W8987 Wi-Fi connectivity,
|
|
More information about 88W8987 device you can find on
|
|
https://www.nxp.com/products/wireless-connectivity/wi-fi-plus-bluetooth-plus-802-15-4/2-4-5-ghz-dual-band-1x1-wi-fi-5-802-11ac-plus-bluetooth-5-2-solution:88W8987
|
|
|
|
config NXP_IW416
|
|
bool "NXP IW416 [EXPERIMENTAL]"
|
|
select EXPERIMENTAL
|
|
help
|
|
Enable NXP IW416 Wi-Fi connectivity,
|
|
More information about IW416 device you can find on
|
|
https://www.nxp.com/products/wireless-connectivity/wi-fi-plus-bluetooth-plus-802-15-4/2-4-5-ghz-dual-band-1x1-wi-fi-4-802-11n-plus-bluetooth-5-2-solution:IW416
|
|
|
|
config NXP_IW61X
|
|
bool "NXP IW61X [EXPERIMENTAL]"
|
|
select EXPERIMENTAL
|
|
help
|
|
Enable NXP IW61X Wi-Fi connectivity,
|
|
More information about IW61X device you can find on
|
|
https://www.nxp.com/products/wireless-connectivity/wi-fi-plus-bluetooth-plus-802-15-4/2-4-5ghz-dual-band-1x1-wi-fi-6-802-11ax-plus-bluetooth-5-2-solution:IW611
|
|
https://www.nxp.com/products/wireless-connectivity/wi-fi-plus-bluetooth-plus-802-15-4/2-4-5-ghz-dual-band-1x1-wi-fi-6-802-11ax-plus-bluetooth-5-2-plus-802-15-4-tri-radio-solution:IW612
|
|
|
|
config NXP_88W8801
|
|
bool "NXP 88W8801 [EXPERIMENTAL]"
|
|
select EXPERIMENTAL
|
|
help
|
|
Enable NXP 88W8801 Wi-Fi connectivity,
|
|
More information about 88W8801 device you can find on
|
|
https://www.nxp.com/products/wireless-connectivity/wi-fi-plus-bluetooth-plus-802-15-4/2-4-ghz-single-band-1x1-wi-fi-4-802-11n-solution:88W8801
|
|
|
|
endchoice
|
|
|
|
choice NXP_88W8987_MODULE
|
|
prompt "Select NXP 88W8987 module"
|
|
depends on NXP_88W8987 && !NXP_WIFI_CUSTOM
|
|
|
|
config NXP_88W8987_AW_CM358_USD
|
|
bool "NXP AW-CM358-USD"
|
|
help
|
|
Azurewave Type CM358 module based on NXP 88W8987 combo LGA chipset
|
|
which supports which supports Wi-Fi® 802.11a/b/g/n/ac +
|
|
Bluetooth® 5.1 BR/EDR/LE up to 433Mbps PHY data rate on Wi-Fi® and
|
|
3Mbps PHY data rate on Bluetooth®.
|
|
|
|
Detailed information about Azurewave Type AW CM358 module you can find on
|
|
https://www.azurewave.com/wireless-modules-nxp.html
|
|
|
|
config NXP_88W8987_AW_CM358MA_M2
|
|
bool "NXP AW-CM358MA-M2"
|
|
help
|
|
Azurewave Type CM358MA module based on NXP 88W8987 combo LGA chipset
|
|
which supports which supports Wi-Fi® 802.11a/b/g/n/ac +
|
|
Bluetooth® 5.1 BR/EDR/LE up to 433Mbps PHY data rate on Wi-Fi® and
|
|
3Mbps PHY data rate on Bluetooth®.
|
|
|
|
Detailed information about Murata Type AW CM358MA module you can find on
|
|
https://www.azurewave.com/wireless-modules-nxp.html
|
|
|
|
config NXP_88W8987_MURATA_1ZM_USD
|
|
bool "NXP MURATA-1ZM-USD"
|
|
help
|
|
Murata Type 1ZM is a small and very high performance module based on
|
|
NXP 88W8987 combo chipset which supports Wi-Fi® 802.11a/b/g/n/ac +
|
|
Bluetooth® 5.1 BR/EDR/LE up to 433Mbps PHY data rate on Wi-Fi® and
|
|
3Mbps PHY data rate on Bluetooth®.
|
|
|
|
Detailed information about Murata Type 1ZM module you can find on
|
|
https://www.murata.com/en-us/products/connectivitymodule/wi-fi-bluetooth/overview/lineup/type1zm
|
|
https://www.murata.com/en-us/products/connectivitymodule/wi-fi-bluetooth/overview/lineup/usd-m2-adapter
|
|
|
|
config NXP_88W8987_MURATA_1ZM_M2
|
|
bool "NXP MURATA-1ZM-M2"
|
|
help
|
|
Murata Type 1ZM is a small and very high performance module based on
|
|
NXP 88W8987 combo chipset which supports Wi-Fi® 802.11a/b/g/n/ac +
|
|
Bluetooth® 5.1 BR/EDR/LE up to 433Mbps PHY data rate on Wi-Fi® and
|
|
3Mbps PHY data rate on Bluetooth®.
|
|
|
|
Detailed information about Murata Type 1ZM module you can find on
|
|
https://www.murata.com/en-us/products/connectivitymodule/wi-fi-bluetooth/overview/lineup/type1zm
|
|
|
|
endchoice
|
|
|
|
choice NXP_IW416_MODULE
|
|
prompt "Select NXP IW416 module"
|
|
depends on NXP_IW416 && !NXP_WIFI_CUSTOM
|
|
|
|
config NXP_IW416_AW_AM457_USD
|
|
bool "NXP IW416-AW-AM457-USD"
|
|
help
|
|
Azurewave Type AM457 is a small and high performance module based on
|
|
NXP IW416 combo chipset which supports Wi-Fi® 802.11a/b/g/n +
|
|
Bluetooth® 5.2 BR/EDR/LE up to 150 Mbps PHY data rate on Wi-Fi® and
|
|
3Mbps PHY data rate on Bluetooth®.
|
|
|
|
Detailed information about Type AW AM457 module you can find on
|
|
https://www.azurewave.com/wireless-modules-nxp.html
|
|
|
|
config NXP_IW416_AW_AM457MA_M2
|
|
bool "NXP IW416-AW-AM457MA-M2"
|
|
help
|
|
Azurewave Type AM457MA is a small and high performance module based on
|
|
NXP IW416 combo chipset which supports Wi-Fi® 802.11a/b/g/n +
|
|
Bluetooth® 5.2 BR/EDR/LE up to 150 Mbps PHY data rate on Wi-Fi® and
|
|
3Mbps PHY data rate on Bluetooth®.
|
|
|
|
Detailed information about Type AW AM457MA module you can find on
|
|
https://www.azurewave.com/wireless-modules-nxp.html
|
|
|
|
config NXP_IW416_AW_AM510_USD
|
|
bool "NXP IW416-AW-AM510-USD"
|
|
help
|
|
Azurewave Type AM510 is a small and high performance module based on
|
|
NXP IW416 combo chipset which supports Wi-Fi® 802.11a/b/g/n +
|
|
Bluetooth® 5.2 BR/EDR/LE up to 150 Mbps PHY data rate on Wi-Fi® and
|
|
3Mbps PHY data rate on Bluetooth®.
|
|
|
|
Detailed information about Type AW AM510 module you can find on
|
|
https://www.azurewave.com/wireless-modules-nxp.html
|
|
|
|
config NXP_IW416_AW_AM510MA_M2
|
|
bool "NXP IW416-AW-AM510MA-M2"
|
|
help
|
|
Azurewave Type AM510MA is a small and high performance module based on
|
|
NXP IW416 combo chipset which supports Wi-Fi® 802.11a/b/g/n +
|
|
Bluetooth® 5.2 BR/EDR/LE up to 150 Mbps PHY data rate on Wi-Fi® and
|
|
3Mbps PHY data rate on Bluetooth®.
|
|
|
|
Detailed information about Type AW AM510MA module you can find on
|
|
https://www.azurewave.com/wireless-modules-nxp.html
|
|
|
|
config NXP_IW416_MURATA_1XK_USD
|
|
bool "NXP IW416-MURATA-1XK-USD"
|
|
help
|
|
Murata Type 1XK is a small and high performance module based on
|
|
NXP IW416 combo chipset which supports Wi-Fi® 802.11a/b/g/n +
|
|
Bluetooth® 5.2 BR/EDR/LE up to 150 Mbps PHY data rate on Wi-Fi® and
|
|
3Mbps PHY data rate on Bluetooth®.
|
|
|
|
Detailed information about Type 1XK module you can find on
|
|
https://www.murata.com/en-us/products/connectivitymodule/wi-fi-bluetooth/overview/lineup/type1xk
|
|
https://www.murata.com/en-us/products/connectivitymodule/wi-fi-bluetooth/overview/lineup/usd-m2-adapter
|
|
|
|
config NXP_IW416_MURATA_1XK_M2
|
|
bool "NXP IW416-MURATA-1XK-M2"
|
|
help
|
|
Murata Type 1XK is a small and high performance module based on
|
|
NXP IW416 combo chipset which supports Wi-Fi® 802.11a/b/g/n +
|
|
Bluetooth® 5.2 BR/EDR/LE up to 150 Mbps PHY data rate on Wi-Fi® and
|
|
3Mbps PHY data rate on Bluetooth®.
|
|
|
|
Detailed information about Type 1XK module you can find on
|
|
https://www.murata.com/en-us/products/connectivitymodule/wi-fi-bluetooth/overview/lineup/type1xk
|
|
|
|
endchoice
|
|
|
|
choice NXP_IW61X_MODULE
|
|
prompt "Select NXP IW61X module"
|
|
depends on NXP_IW61X && !NXP_WIFI_CUSTOM
|
|
|
|
config NXP_IW612_MURATA_2EL_USD
|
|
bool "NXP IW612-MURATA-2EL-USD"
|
|
help
|
|
Murata Type 2EL is a small and very high performance module based on
|
|
NXP IW612 combo chipset which supports Wi-Fi® 802.11a/b/g/n/ac/ax +
|
|
Bluetooth® 5.3 BR/EDR/LE + 802.15.4 up to 601Mbps PHY data rate on Wi-fi®
|
|
and 2Mbps PHY data rate on Bluetooth®.
|
|
|
|
Detailed information about Type 2EL module you can find on
|
|
https://www.murata.com/en-us/products/connectivitymodule/wi-fi-bluetooth/overview/lineup/type2el
|
|
https://www.murata.com/en-us/products/connectivitymodule/wi-fi-bluetooth/overview/lineup/usd-m2-adapter
|
|
|
|
config NXP_IW612_MURATA_2EL_M2
|
|
bool "NXP IW612-MURATA-2EL-M2"
|
|
help
|
|
Murata Type 2EL is a small and very high performance module based on
|
|
NXP IW612 combo chipset which supports Wi-Fi® 802.11a/b/g/n/ac/ax +
|
|
Bluetooth® 5.3 BR/EDR/LE + 802.15.4 up to 601Mbps PHY data rate on Wi-fi®
|
|
and 2Mbps PHY data rate on Bluetooth®.
|
|
|
|
Detailed information about Type 2EL module you can find on
|
|
https://www.murata.com/en-us/products/connectivitymodule/wi-fi-bluetooth/overview/lineup/type2el
|
|
|
|
config NXP_IW611_MURATA_2DL_USD
|
|
bool "NXP IW611-MURATA-2DL-USD"
|
|
help
|
|
Murata Type 2DL is a small and very high performance module based on
|
|
NXP IW611 combo chipset which supports Wi-Fi® 802.11a/b/g/n/ac/ax +
|
|
Bluetooth® 5.3 BR/EDR/LE up to 601Mbps PHY data rate on Wi-fi® and
|
|
2Mbps PHY data rate on Bluetooth®.
|
|
|
|
Detailed information about Type 2DL module you can find on
|
|
https://www.murata.com/en-us/products/connectivitymodule/wi-fi-bluetooth/overview/lineup/type2dl
|
|
https://www.murata.com/en-us/products/connectivitymodule/wi-fi-bluetooth/overview/lineup/usd-m2-adapter
|
|
|
|
config NXP_IW611_MURATA_2DL_M2
|
|
bool "NXP IW611-MURATA-2DL-M2"
|
|
help
|
|
Murata Type 2DL is a small and very high performance module based on
|
|
NXP IW611 combo chipset which supports Wi-Fi® 802.11a/b/g/n/ac/ax +
|
|
Bluetooth® 5.3 BR/EDR/LE up to 601Mbps PHY data rate on Wi-fi® and
|
|
2Mbps PHY data rate on Bluetooth®.
|
|
|
|
Detailed information about Type 2DL module you can find on
|
|
https://www.murata.com/en-us/products/connectivitymodule/wi-fi-bluetooth/overview/lineup/type2dl
|
|
|
|
endchoice
|
|
|
|
choice NXP_88W8801_MODULE
|
|
prompt "Select NXP 88W8801 module"
|
|
depends on NXP_88W8801 && !NXP_WIFI_CUSTOM
|
|
|
|
config NXP_88W8801_AW_NM191_USD
|
|
bool "NXP AW-NM191-USD"
|
|
help
|
|
Azurewave Type NM191 is a small high-performance module (integrated PCB
|
|
antenna) based on NXP 88W8801 chipset which supports Wi-Fi® 802.11b/g/n
|
|
up to 72.2 Mbps PHY data rate.
|
|
|
|
Detailed information about Murata Type AW NM191 module you can find on
|
|
https://www.azurewave.com/wireless-modules-nxp.html
|
|
|
|
config NXP_88W8801_AW_NM191MA_M2
|
|
bool "NXP AW-NM191MA-M2"
|
|
help
|
|
Azurewave Type NM191MA is a small high-performance module (integrated PCB
|
|
antenna) based on NXP 88W8801 chipset which supports Wi-Fi® 802.11b/g/n
|
|
up to 72.2 Mbps PHY data rate.
|
|
|
|
Detailed information about Murata Type AW NM191MA module you can find on
|
|
https://www.azurewave.com/wireless-modules-nxp.html
|
|
|
|
config NXP_88W8801_MURATA_2DS_USD
|
|
bool "NXP MURATA-2DS-USD"
|
|
help
|
|
Murata Type 2DS is a small high-performance module (integrated PCB antenna)
|
|
based on NXP 88W8801 chipset which supports Wi-Fi® 802.11b/g/n
|
|
up to 72.2 Mbps PHY data rate.
|
|
|
|
Detailed information about Murata Type 2DS module you can find on
|
|
https://www.murata.com/en-us/products/connectivitymodule/wi-fi-bluetooth/overview/lineup/type2ds
|
|
https://www.murata.com/en-us/products/connectivitymodule/wi-fi-bluetooth/overview/lineup/usd-m2-adapter
|
|
|
|
config NXP_88W8801_MURATA_2DS_USD
|
|
bool "NXP MURATA-2DS-M2"
|
|
help
|
|
Murata Type 2DS is a small high-performance module (integrated PCB antenna)
|
|
based on NXP 88W8801 chipset which supports Wi-Fi® 802.11b/g/n
|
|
up to 72.2 Mbps PHY data rate.
|
|
|
|
Detailed information about Murata Type 2DS module you can find on
|
|
https://www.murata.com/en-us/products/connectivitymodule/wi-fi-bluetooth/overview/lineup/type2ds
|
|
|
|
endchoice
|
|
|
|
config NXP_WIFI_SHELL
|
|
bool "NXP Wi-Fi shell"
|
|
depends on SHELL
|
|
help
|
|
NXP Wi-Fi shell commands support.
|
|
|
|
menu "Wi-Fi driver Stack configurations"
|
|
|
|
config NXP_WIFI_MON_TASK_STACK_SIZE
|
|
int "Mon thread stack size"
|
|
default 1152
|
|
help
|
|
This option specifies the size of the stack used by the mon task.
|
|
|
|
config NXP_WIFI_WLCMGR_TASK_STACK_SIZE
|
|
int "Wlcmgr thread stack size"
|
|
default 5120
|
|
help
|
|
This option specifies the size of the stack used by the wlcmgr task.
|
|
|
|
config NXP_WIFI_POWERSAVE_TASK_STACK_SIZE
|
|
int "Wifi powersave task stack size"
|
|
default 512
|
|
help
|
|
This option specifies the size of the stack used by the wifi powersave task.
|
|
|
|
config NXP_WIFI_TX_TASK_STACK_SIZE
|
|
int "Wifi driver TX task stack size"
|
|
default 2048
|
|
depends on NXP_WIFI_WMM
|
|
help
|
|
This option specifies the size of the stack used by the wifi driver TX task.
|
|
|
|
config NXP_WIFI_DRIVER_TASK_STACK_SIZE
|
|
int "Wifi driver task stack size"
|
|
default 2048
|
|
help
|
|
This option specifies the size of the stack used by the wifi driver task.
|
|
|
|
config NXP_WIFI_SCAN_TASK_STACK_SIZE
|
|
int "Wifi scan task stack size"
|
|
default 2048
|
|
help
|
|
This option specifies the size of the stack used by the wifi scan task.
|
|
|
|
endmenu
|
|
|
|
menu "Wi-Fi Station Support"
|
|
|
|
config NXP_WIFI_STA_AUTO_CONN
|
|
bool "Automatically starts STA connection"
|
|
default n
|
|
help
|
|
This option enables Station auto connection support.
|
|
|
|
if NXP_WIFI_STA_AUTO_CONN
|
|
|
|
config NXP_WIFI_STA_AUTO_SSID
|
|
string "NXP Wi-Fi STA auto connect SSID"
|
|
depends on NXP_WIFI_STA_AUTO_CONN
|
|
default "myssid"
|
|
help
|
|
This option specifies the SSID of the external Access Point
|
|
for auto connection.
|
|
Maximum length is 32 ascii characters.
|
|
|
|
config NXP_WIFI_STA_AUTO_PASSWORD
|
|
string "NXP Wi-Fi STA auto connect password"
|
|
depends on NXP_WIFI_STA_AUTO_CONN
|
|
default ""
|
|
help
|
|
This option specifies the Passphrase of the external
|
|
Access Point for auto connection.
|
|
Only support PSK security or open security by default.
|
|
Length range 8 - 64, or 0 for open security.
|
|
|
|
endif
|
|
|
|
config NXP_WIFI_STA_RECONNECT
|
|
bool "Automatically starts STA Reconnection"
|
|
default y
|
|
help
|
|
This option enables Station auto reconnection support,
|
|
when disconnected from current associated Access Point.
|
|
|
|
config NXP_WIFI_AUTO_POWER_SAVE
|
|
bool "Automatically starts Power Save support"
|
|
default y
|
|
help
|
|
WiFi driver will automatically initiate power save when initialized.
|
|
|
|
menu "Wi-Fi Scan Support"
|
|
|
|
config NXP_WIFI_EXT_SCAN_SUPPORT
|
|
bool "Extended Scan Support"
|
|
default y
|
|
depends on !NXP_88W8801
|
|
help
|
|
This option enables the use of extended scan support.
|
|
|
|
config NXP_WIFI_SCAN_WITH_RSSIFILTER
|
|
bool "Scan with rssi filter"
|
|
default y
|
|
help
|
|
This option enables rssi threshold support in the Wi-Fi driver.
|
|
|
|
config NXP_WIFI_MAX_AP_ENTRIES
|
|
int "Maximum scan entries"
|
|
range 1 30
|
|
default 10
|
|
help
|
|
This is the maximum number of entries in the
|
|
list of APs stored by wifi driver. Each entry takes
|
|
about 400 bytes of RAM. The value should
|
|
be decided based on number of APs expected
|
|
to be present in the end user environment.
|
|
Note that the wifi driver automatically keeps
|
|
only the highest signal strength APs in the list.
|
|
|
|
config NXP_WIFI_SCAN_CHANNEL_GAP
|
|
int "Max scan channel gap"
|
|
default 1
|
|
help
|
|
This option sets the max scan channel gap time between two scan commands.
|
|
|
|
endmenu
|
|
|
|
config NXP_WIFI_WMM_UAPSD
|
|
bool "UAPSD mode"
|
|
default y
|
|
help
|
|
This option enables WMM UAPSD in the Wi-Fi driver.
|
|
|
|
config NXP_WIFI_ROAMING
|
|
bool "Wi-Fi Soft Roaming"
|
|
default y
|
|
help
|
|
This option enables Soft Roaming support in the Wi-Fi driver.
|
|
|
|
config NXP_WIFI_CLOUD_KEEP_ALIVE
|
|
bool "Cloud Keep Alive"
|
|
help
|
|
This option enables Cloud Keep Alive support in the Wi-Fi driver.
|
|
|
|
config NXP_WIFI_11K
|
|
bool "802.11K Support"
|
|
default y
|
|
help
|
|
This option enables the use of 802.11k support.
|
|
|
|
config NXP_WIFI_11V
|
|
bool "802.11V Support"
|
|
default y
|
|
help
|
|
This option enables the use of 802.11v support.
|
|
|
|
config NXP_WIFI_11R
|
|
bool "802.11R Support"
|
|
default y
|
|
depends on NXP_88W8987 || NXP_IW416 || NXP_RW610 || NXP_WIFI_CUSTOM
|
|
help
|
|
This option enables the use of 802.11r support.
|
|
|
|
config NXP_WIFI_INACTIVITY_TIMEOUT_EXT
|
|
bool "Inactivity Timeout Ext Support"
|
|
default y
|
|
help
|
|
This option enables the use of Inactivity Timeout Ext support.
|
|
|
|
endmenu
|
|
|
|
config NXP_WIFI_MAX_PRIO
|
|
int
|
|
default 1
|
|
help
|
|
This option sets Wi-Fi max priority in the Wi-Fi driver.
|
|
|
|
config NXP_WIFI_SOFTAP_SUPPORT
|
|
bool "Wi-Fi SoftAP Support"
|
|
select NET_DHCPV4_SERVER
|
|
select WIFI_NM_WPA_SUPPLICANT_AP if WIFI_NM_WPA_SUPPLICANT
|
|
default y
|
|
help
|
|
Option to enable Wi-Fi SoftAP functions in the Wi-Fi driver.
|
|
|
|
if NXP_WIFI_SOFTAP_SUPPORT
|
|
|
|
config NXP_WIFI_SOFTAP_IP_ADDRESS
|
|
string "NXP SoftAP mode IP Address"
|
|
default "192.168.10.1"
|
|
|
|
config NXP_WIFI_SOFTAP_IP_GATEWAY
|
|
string "Gateway Address"
|
|
default "192.168.10.1"
|
|
|
|
config NXP_WIFI_SOFTAP_IP_MASK
|
|
string "Network Mask"
|
|
default "255.255.255.0"
|
|
|
|
config NXP_WIFI_SOFTAP_IP_BASE
|
|
string "NXP SoftAP base address"
|
|
default "192.168.10.2"
|
|
|
|
config NXP_WIFI_CAPA
|
|
bool "Wi-Fi Soft AP Capability"
|
|
default y
|
|
help
|
|
This option enables uAP Wi-Fi Capability in the Wi-Fi driver.
|
|
|
|
config NXP_WIFI_UAP_STA_MAC_ADDR_FILTER
|
|
bool "Wi-Fi SoftAP clients white/black list"
|
|
default y
|
|
help
|
|
Allow/Block MAC addresses specified in the allowed list.
|
|
|
|
config NXP_WIFI_UAP_WORKAROUND_STICKY_TIM
|
|
bool "Sticky Tim"
|
|
default y
|
|
help
|
|
This config enables the workaround of a
|
|
particular firmware issue which causes packets
|
|
being sent on air even if STA is in IEEE PS. When
|
|
enabled this will enable the sticky TIM bit
|
|
workaround. A downside of this is that the STA
|
|
client of the uAP will not be able to go in IEEE PS.
|
|
|
|
endif
|
|
|
|
menu "Wi-Fi SDIO Multi Port Aggregation"
|
|
|
|
config NXP_WIFI_SDIO_MULTI_PORT_RX_AGGR
|
|
bool "SDIO Multiport Rx Aggregation"
|
|
default y if !SOC_SERIES_RW6XX
|
|
help
|
|
This option enables SDIO Multiport Rx Aggregation support in the Wi-Fi driver.
|
|
|
|
config NXP_WIFI_SDIO_MULTI_PORT_TX_AGGR
|
|
bool "SDIO Multiport Tx Aggregation"
|
|
default y if !SOC_SERIES_RW6XX
|
|
depends on NXP_WIFI_WMM
|
|
help
|
|
This option enables SDIO Multiport Rx Aggregation support in the Wi-Fi driver.
|
|
|
|
endmenu
|
|
|
|
config NXP_WIFI_11AX
|
|
bool "802.11AX Support"
|
|
default y
|
|
select NXP_WIFI_11AC
|
|
select NXP_WIFI_WMM
|
|
depends on NXP_RW610 || NXP_IW61X || NXP_WIFI_CUSTOM
|
|
help
|
|
This option enables the use of 802.11ax support.
|
|
|
|
config NXP_WIFI_11AC
|
|
bool "802.11AC Support"
|
|
default y
|
|
select NXP_WIFI_WMM
|
|
depends on NXP_RW610 || NXP_IW61X || NXP_88W8987 || NXP_WIFI_CUSTOM
|
|
help
|
|
This option enables the use of 802.11ac support.
|
|
|
|
config NXP_WIFI_WMM
|
|
bool "802.11 WMM Support"
|
|
default y
|
|
help
|
|
This option enables the use of 802.11 WMM support.
|
|
|
|
config NXP_WIFI_SET_SU
|
|
bool "Single User Support"
|
|
default y
|
|
depends on NXP_WIFI_11AX
|
|
help
|
|
This option enables the use of single user support.
|
|
|
|
config NXP_WIFI_MULTI_BSSID_SUPPORT
|
|
bool "Multiple BSSID Support"
|
|
default y
|
|
depends on NXP_WIFI_11AX
|
|
help
|
|
This option enables the use of multiple BSSID support.
|
|
|
|
config NXP_WIFI_FRAG_THRESHOLD
|
|
bool "Set Fragment Threshold Support"
|
|
default y
|
|
help
|
|
This option enables the set of fragment threshold support.
|
|
|
|
config NXP_WIFI_FORCE_RTS
|
|
bool "Force RTS Support"
|
|
default y
|
|
help
|
|
This option enables the set of force RTS support.
|
|
|
|
config NXP_WIFI_TX_AMPDU_PROT_MODE
|
|
bool "TX AMPDU Protection Mode Support"
|
|
default y
|
|
help
|
|
This option enables TX AMPDU protection mode support.
|
|
|
|
config NXP_WIFI_EXTERNAL_COEX_PTA
|
|
bool "External COEX PTA Support"
|
|
default y
|
|
help
|
|
This option enables the use of external coex PTA support.
|
|
|
|
config NXP_WIFI_TURBO_MODE
|
|
bool "Turbo Mode"
|
|
default y
|
|
depends on NXP_WIFI_WMM
|
|
depends on !NXP_88W8801
|
|
help
|
|
This option enables WMM Turbo Mode support in the Wi-Fi driver.
|
|
|
|
config NXP_WIFI_IPV6
|
|
bool "IPv6 Support"
|
|
default y
|
|
depends on NET_IPV6
|
|
help
|
|
This option enables the use of IPv6 support.
|
|
|
|
config NXP_WIFI_5GHz_SUPPORT
|
|
bool "5GHz Support(Band A)"
|
|
default y
|
|
depends on !NXP_88W8801
|
|
help
|
|
This option enables the use of 5GHz.
|
|
|
|
config NXP_WIFI_TX_RX_ZERO_COPY
|
|
bool "Zero memory copy TX/RX data packets"
|
|
default y if NXP_RW610
|
|
imply NET_IPV4_FRAGMENT
|
|
help
|
|
This option enables the Zero memory copy of data packets in Wi-Fi driver data path.
|
|
|
|
config NXP_WIFI_GET_LOG
|
|
bool "Get 802.11 log"
|
|
default y
|
|
help
|
|
This option gets 802.11 log in the Wi-Fi driver.
|
|
|
|
config NXP_WIFI_TX_PER_TRACK
|
|
bool "TX packet error tracking"
|
|
help
|
|
This option is used to track Tx packet error ratio.
|
|
|
|
config NXP_WIFI_CSI
|
|
bool "CSI support"
|
|
default y
|
|
depends on NXP_RW610 || NXP_88W8987 || NXP_WIFI_CUSTOM
|
|
help
|
|
This option enable/disable channel state information collection.
|
|
|
|
config NXP_WIFI_RESET
|
|
bool "Wi-Fi reset"
|
|
default y
|
|
help
|
|
This option is used to enable/disable/reset Wi-Fi.
|
|
|
|
config NXP_WIFI_ECSA
|
|
bool "ECSA"
|
|
default y
|
|
help
|
|
This option is used to do channel switch according to spec.
|
|
|
|
config NXP_WIFI_UNII4_BAND_SUPPORT
|
|
bool "UNII4 support"
|
|
default y
|
|
depends on NXP_WIFI_5GHz_SUPPORT
|
|
help
|
|
This option is used to enable/disable UNII4 channels.
|
|
|
|
config NXP_WIFI_RECOVERY
|
|
bool "RECOVERY"
|
|
depends on NXP_RW610
|
|
help
|
|
This option is used to enable wifi recovery support.
|
|
|
|
if NXP_RW610
|
|
|
|
config NXP_WIFI_FW_VDLLV2
|
|
bool "Firmware virtual dynamic link library version 2"
|
|
default y
|
|
help
|
|
This option is to load some firmware features in run-time.
|
|
|
|
config NXP_WIFI_AUTO_NULL_TX
|
|
bool "Auto send null frame"
|
|
default y
|
|
help
|
|
This option is to support sending null frame in period for CSI.
|
|
|
|
config NXP_WIFI_NET_MONITOR
|
|
bool "Networking monitor"
|
|
default y
|
|
help
|
|
This option is used to set/get network monitor configuration.
|
|
|
|
config NXP_WIFI_CAU_TEMPERATURE
|
|
bool "Cau temperature"
|
|
default y
|
|
help
|
|
This option is used to enable/disable Cau temperature.
|
|
|
|
config NXP_WIFI_TSP
|
|
bool "Thermal Safeguard Protection"
|
|
default y
|
|
help
|
|
This option is used to set and get Thermal Safeguard Protection configuration.
|
|
|
|
config NXP_WIFI_IPS
|
|
bool "IPS"
|
|
default y
|
|
help
|
|
This option enable/disable config for IPS in the Wi-Fi driver.
|
|
|
|
config NXP_WIFI_RX_ABORT_CFG
|
|
bool "RX abort support"
|
|
default y
|
|
help
|
|
This option enables rx abort config with static RSSI threshold
|
|
in the Wi-Fi driver.
|
|
|
|
config NXP_WIFI_RX_ABORT_CFG_EXT
|
|
bool "RX abort extension support"
|
|
default y
|
|
help
|
|
This option enables rx abort extension config with dynamic
|
|
RSSI threshold in the Wi-Fi driver.
|
|
|
|
config NXP_WIFI_CCK_DESENSE_CFG
|
|
bool "CCK desense mode support"
|
|
default y
|
|
help
|
|
This option enables cck desense mode in the Wi-Fi driver.
|
|
|
|
config NXP_WIFI_COEX_DUTY_CYCLE
|
|
bool "Set duty cycle"
|
|
default y
|
|
help
|
|
This option sets duty cycle in the Wi-Fi driver.
|
|
|
|
config NXP_WIFI_MMSF
|
|
bool "11AX density config"
|
|
default y
|
|
help
|
|
This option is used to specify/get 11ax density config in the Wi-Fi driver.
|
|
|
|
config NXP_WIFI_IMD3_CFG
|
|
bool "Set imd validation parameters"
|
|
default y
|
|
help
|
|
This option is used to set IM3 configuration for Wi-Fi,
|
|
BLE coex mode and antenna isolation debug.
|
|
|
|
config NXP_WIFI_ANT_DETECT
|
|
bool "Antenna automatic detection"
|
|
default y
|
|
help
|
|
This option is used to auto detect which two antennas are present and
|
|
then configure corresponding evaluate Mode-X to firmware and enable antenna diversity.
|
|
|
|
config NXP_WIFI_WLAN_CALDATA_1ANT
|
|
bool "One antenna"
|
|
help
|
|
This option is used to enable one antenna.
|
|
|
|
config NXP_WIFI_WLAN_CALDATA_1ANT_WITH_DIVERSITY
|
|
bool "One antenna diversity"
|
|
help
|
|
This option is used to enable one antenna diversity.
|
|
|
|
config NXP_WIFI_WLAN_CALDATA_3ANT_DIVERSITY
|
|
bool "Three antenna diversity"
|
|
help
|
|
This option is used to enable three antenna diversity.
|
|
|
|
endif # NXP_RW610
|
|
|
|
config NXP_WIFI_11AX_TWT
|
|
bool "802.11ax TWT support"
|
|
default y
|
|
depends on NXP_WIFI_11AX
|
|
help
|
|
This option enables 11ax TWT in the Wi-Fi driver.
|
|
|
|
config NXP_WIFI_DTIM_PERIOD
|
|
bool "Wi-Fi DTIM period"
|
|
default y
|
|
help
|
|
This option is used to set dtim period in the Wi-Fi driver.
|
|
|
|
config NXP_WIFI_MEM_ACCESS
|
|
bool
|
|
default y if NXP_RW610
|
|
help
|
|
This option enables memory access cmd in the Wi-Fi driver.
|
|
|
|
config NXP_WIFI_REG_ACCESS
|
|
bool
|
|
default y if NXP_RW610
|
|
help
|
|
This option enables register access cmd in the Wi-Fi driver.
|
|
|
|
config NXP_WIFI_SUBSCRIBE_EVENT_SUPPORT
|
|
bool "Subscribe event from firmware"
|
|
default y if NXP_RW610
|
|
help
|
|
This option prints the get subscribe event from firmware for user test.
|
|
|
|
config NXP_WIFI_TX_RX_HISTOGRAM
|
|
bool "TX/RX statistics"
|
|
default y if NXP_RW610
|
|
help
|
|
This option enables TX/RX statistics in the Wi-Fi driver.
|
|
|
|
config NXP_WIFI_RF_TEST_MODE
|
|
bool "WLAN RF Test Mode"
|
|
default y if NXP_RW610
|
|
help
|
|
This option enables WLAN test mode commands.
|
|
|
|
config NXP_WIFI_EU_VALIDATION
|
|
bool "EU Validation"
|
|
default y
|
|
help
|
|
This option enables EU Validation Support.
|
|
|
|
if NXP_RW610 || NXP_IW61X
|
|
|
|
config NXP_WIFI_CLOCKSYNC
|
|
bool "Clock sync using TSF latch"
|
|
default y
|
|
help
|
|
This option enables clock synchronization of TSF latches.
|
|
|
|
config NXP_WIFI_COMPRESS_TX_PWTBL
|
|
bool "Compress TX Power Table Support"
|
|
default y
|
|
help
|
|
This option enables the use of Compress TX Power Table support.
|
|
|
|
config NXP_WIFI_COMPRESS_RU_TX_PWTBL
|
|
bool "Compress RU TX Power Table Support"
|
|
default y
|
|
help
|
|
This option enables the use of Compress RU TX Power Table support.
|
|
|
|
endif
|
|
|
|
config NXP_WIFI_EU_CRYPTO
|
|
bool "Wi-Fi EU Crypto"
|
|
default y
|
|
depends on !NXP_88W8801
|
|
help
|
|
This option enables Wi-Fi EU Crypto support in the Wi-Fi driver.
|
|
|
|
config NXP_WIFI_HOST_SLEEP
|
|
bool "HOST Sleep"
|
|
default y if PM
|
|
help
|
|
This option enables HOST Sleep support for MCU.
|
|
|
|
config NXP_WIFI_MEF_CFG
|
|
bool "Memory Efficient Filtering"
|
|
default y if PM
|
|
help
|
|
This option enables Memory Efficient Filtering support in the Wi-Fi driver.
|
|
|
|
config NXP_WIFI_FIPS
|
|
bool "FIPS"
|
|
help
|
|
This option enables Wi-Fi FIPS support in the Wi-Fi driver.
|
|
|
|
config NXP_WIFI_OWE
|
|
bool "Opportunistic Wireless Encryption"
|
|
default y
|
|
help
|
|
This option enables Wi-Fi Opportunistic Wireless Encryption support
|
|
in the Wi-Fi driver.
|
|
|
|
config NXP_WIFI_TC_RELOCATE
|
|
bool "Traffic api relocate to RAM"
|
|
default y
|
|
help
|
|
Relocate Wi-Fi transmit and receive api to RAM to increase
|
|
traffic throughput.
|
|
|
|
config NXP_WIFI_CUSTOM_CALDATA
|
|
bool "Set caldata by drv"
|
|
help
|
|
This option force to use custom calibration data.
|
|
|
|
if NXP_88W8987 || NXP_IW416
|
|
|
|
config NXP_WIFI_FW_AUTO_RECONNECT
|
|
bool "Firmware Auto Reconnect"
|
|
default y
|
|
help
|
|
This option enables the use of firmware auto recoonect support.
|
|
|
|
config NXP_WIFI_IND_DNLD
|
|
bool "Parallel Firmware Download"
|
|
help
|
|
This option enables the use of Parallel firmware download support.
|
|
|
|
config NXP_WIFI_IND_RESET
|
|
bool "Wi-Fi Independent Reset"
|
|
help
|
|
This option enables the use of Wi-Fi independent reset support.
|
|
|
|
endif
|
|
|
|
config NXP_WIFI_SMOKE_TESTS
|
|
bool "Smoke Tests"
|
|
select NET_SHELL
|
|
select KERNEL_SHELL
|
|
select SHELL_BACKEND_TELNET
|
|
select SHELL_TELNET_SUPPORT_COMMAND
|
|
help
|
|
This option is for development smoke tests in the Wi-Fi driver.
|
|
|
|
if NXP_WIFI_SMOKE_TESTS
|
|
|
|
config NXP_WIFI_SIGMA_AGENT
|
|
bool "Wi-Fi Alliance Sigma Agent Support"
|
|
select POSIX_API
|
|
select PTHREAD_IPC
|
|
select PTHREAD_CREATE_BARRIER
|
|
select TIMER
|
|
help
|
|
This option is to enable Wi-Fi Alliance Sigma Agent support in the Wi-Fi driver.
|
|
|
|
choice
|
|
prompt "NXP SM IP Address configuration"
|
|
default NXP_WIFI_SM_IP_DHCP
|
|
help
|
|
Choose whether to use an IP assigned by DHCP Server or
|
|
configure a static IP Address.
|
|
|
|
config NXP_WIFI_SM_IP_DHCP
|
|
bool "DHCP"
|
|
help
|
|
Use DHCP to get an IP Address.
|
|
|
|
config NXP_WIFI_SM_IP_STATIC
|
|
bool "Static"
|
|
help
|
|
Setup Static IP Address.
|
|
|
|
endchoice
|
|
|
|
if NXP_WIFI_SM_IP_STATIC
|
|
|
|
config NXP_WIFI_SM_IP_ADDRESS
|
|
string "NXP Station mode IP Address"
|
|
|
|
config NXP_WIFI_SM_IP_GATEWAY
|
|
string "Gateway Address"
|
|
|
|
config NXP_WIFI_SM_IP_MASK
|
|
string "Network Mask"
|
|
|
|
endif
|
|
|
|
endif # NXP_WIFI_SMOKE_TESTS
|
|
|
|
menu "Development and Debugging"
|
|
|
|
config NXP_WIFI_ENABLE_ERROR_LOGS
|
|
bool "WiFi driver error logs control"
|
|
default y if WIFI_LOG_LEVEL_ERR || WIFI_LOG_LEVEL_DBG
|
|
help
|
|
If you enable this, error messages will be printed in case of error
|
|
conditions. This will increase the size of the image. It is strongly
|
|
recommended to keep it enabled during development, to quickly
|
|
localize problems.
|
|
|
|
config NXP_WIFI_ENABLE_WARNING_LOGS
|
|
bool "WiFi driver warning logs control"
|
|
default y if WIFI_LOG_LEVEL_WRN || WIFI_LOG_LEVEL_DBG
|
|
help
|
|
If you enable this, error messages will be printed in case of error
|
|
conditions. This will increase the size of the image. It is strongly
|
|
recommended to keep it enabled during development, to quickly
|
|
localize problems.
|
|
|
|
config NXP_WIFI_DEBUG_BUILD
|
|
bool "Debug build"
|
|
depends on WIFI_LOG_LEVEL_DBG
|
|
help
|
|
If you enable this the debug options will be
|
|
enabled. Asserts will be also be enabled.
|
|
|
|
config NXP_WIFI_OS_DEBUG
|
|
bool "OS debug"
|
|
depends on NXP_WIFI_DEBUG_BUILD
|
|
help
|
|
If you enable this the OS abstraction APIs debugs will be enabled.
|
|
|
|
config NXP_WIFI_NET_DEBUG
|
|
bool "NET debug"
|
|
depends on NXP_WIFI_DEBUG_BUILD
|
|
help
|
|
If you enable this the network driver abstraction APIs debugs will be enabled.
|
|
|
|
config NXP_WIFI_WLCMGR_DEBUG
|
|
bool "Wireless Connection Manager"
|
|
depends on NXP_WIFI_DEBUG_BUILD
|
|
help
|
|
If you enable this the WLAN Connection Manager APIs debugs will be enabled.
|
|
|
|
menu "Wifi extra debug options"
|
|
|
|
config NXP_WIFI_EXTRA_DEBUG
|
|
bool "WiFi driver extra debug control"
|
|
depends on WIFI_LOG_LEVEL_DBG
|
|
help
|
|
This macro helps you to get additional debugging
|
|
information from the wifi driver. For e.g. more
|
|
detailed reason will be given if an assoc failure
|
|
happens.
|
|
|
|
config NXP_WIFI_UAP_DEBUG
|
|
bool "WiFi driver uAP debug"
|
|
depends on NXP_WIFI_EXTRA_DEBUG
|
|
depends on NXP_WIFI_SOFTAP_SUPPORT
|
|
help
|
|
Enabling this will print out logs related
|
|
to the uAP. This is enable to developer
|
|
to localize issues related to uAP. Apart from
|
|
other logs, uAP initialization and configuration
|
|
logs are printed out.
|
|
|
|
config NXP_WIFI_EVENTS_DEBUG
|
|
bool "Dump event information"
|
|
depends on NXP_WIFI_EXTRA_DEBUG
|
|
help
|
|
Enabling this will dump event codes of
|
|
events received on from the firmware.
|
|
This helps the developer to checks the
|
|
events received from the firmware along
|
|
with their timestamp.
|
|
|
|
config NXP_WIFI_CMD_RESP_DEBUG
|
|
bool "Dump command and response codes"
|
|
depends on NXP_WIFI_EXTRA_DEBUG
|
|
help
|
|
Enabling this will dump command and response
|
|
codes send to and received from firmware
|
|
respectively.
|
|
|
|
config NXP_WIFI_PS_DEBUG
|
|
bool "Power save debug"
|
|
depends on NXP_WIFI_EXTRA_DEBUG
|
|
help
|
|
Enabling this will dump command and response
|
|
codes send to and received from firmware
|
|
respectively for power save commands.
|
|
|
|
config NXP_WIFI_SCAN_DEBUG
|
|
bool "Scan debug"
|
|
depends on NXP_WIFI_EXTRA_DEBUG
|
|
help
|
|
Enabling this will enable scan code logs
|
|
This helps the developer to localize wlan
|
|
scan related issues like split scan, channel
|
|
selections, etc
|
|
|
|
config NXP_WIFI_PKT_DEBUG
|
|
bool "Packet debug"
|
|
depends on NXP_WIFI_EXTRA_DEBUG
|
|
help
|
|
Enabling this will enable packet TX/RX code logs
|
|
This helps the developer to localize wlan
|
|
data path related issues like tx/rx failures, etc
|
|
|
|
config NXP_WIFI_IO_INFO_DUMP
|
|
bool "Input-Output debug (basic)"
|
|
depends on NXP_WIFI_EXTRA_DEBUG
|
|
help
|
|
Enabling this will dump information
|
|
about input/output data packets. This information
|
|
has information like packet size and interface
|
|
for which packet is destined.
|
|
|
|
config NXP_WIFI_IO_DEBUG
|
|
bool "Input-Output debug (advanced)"
|
|
depends on NXP_WIFI_EXTRA_DEBUG
|
|
help
|
|
Enabling this will enable I/O debugging
|
|
of wifi driver. This enables you to see
|
|
how the driver is interacting with the
|
|
SDIO bus.
|
|
|
|
config NXP_WIFI_IO_DUMP
|
|
bool "Hex Dump packets"
|
|
depends on NXP_WIFI_EXTRA_DEBUG
|
|
help
|
|
Enabling this will enable I/O debugging
|
|
of wifi driver. This enables you to see
|
|
all the packets that are received/sent from/to
|
|
the SDIO bus.
|
|
|
|
config NXP_WIFI_MEM_DEBUG
|
|
bool "Allocations debug"
|
|
depends on NXP_WIFI_EXTRA_DEBUG
|
|
help
|
|
Enabling this will enable monitoring
|
|
memory allocations and frees done by
|
|
the wifi driver. This enables you to gauge
|
|
and/or debug heap memory used by the driver.
|
|
|
|
config NXP_WIFI_AMPDU_DEBUG
|
|
bool "AMPDU debug"
|
|
depends on NXP_WIFI_EXTRA_DEBUG
|
|
help
|
|
Enabling this will help you to monitor what
|
|
is happening to AMPDU Rx packets. Note
|
|
that AMPDU Tx is not supported by the driver. Note that
|
|
you will need to enable timer debug separately to see
|
|
timer activity going on during out of order packets
|
|
handling.
|
|
|
|
config NXP_WIFI_TIMER_DEBUG
|
|
bool "Timers debug"
|
|
depends on NXP_WIFI_EXTRA_DEBUG
|
|
help
|
|
Enable this to monitor timer activity of the
|
|
driver. Timers are generally used for AMPDU out of
|
|
order packet handling. It is also used for command
|
|
timeout related functionality.
|
|
|
|
config NXP_WIFI_SDIO_DEBUG
|
|
bool "SDIO debug"
|
|
depends on NXP_WIFI_EXTRA_DEBUG
|
|
help
|
|
Enable this to monitor SDIO init deinit errors
|
|
|
|
config NXP_WIFI_SDIO_IO_DEBUG
|
|
bool "SDIO IO debug"
|
|
depends on NXP_WIFI_EXTRA_DEBUG
|
|
help
|
|
Enable this to monitor SDIO driver read write errors
|
|
for data and command operations.
|
|
|
|
config NXP_WIFI_FWDNLD_IO_DEBUG
|
|
bool "FW download debug"
|
|
depends on NXP_WIFI_EXTRA_DEBUG
|
|
help
|
|
Enable this to monitor FW download debug logs
|
|
|
|
config NXP_WIFI_FW_DEBUG
|
|
bool "FW debug"
|
|
depends on NXP_WIFI_EXTRA_DEBUG
|
|
help
|
|
Enable this to monitor debug logs from FW
|
|
|
|
config NXP_WIFI_FW_VDLL_DEBUG
|
|
bool "VDLL debug"
|
|
depends on NXP_WIFI_EXTRA_DEBUG
|
|
help
|
|
Enable this to monitor VDLL debug logs
|
|
|
|
endmenu # Wifi extra debug options
|
|
endmenu # Development and Debugging
|
|
|
|
# Create hidden config options that are used in NXP Wi-Fi driver.
|
|
# This way we do not need to mark them as allowed for CI checks.
|
|
# And also someone else cannot use the same name options.
|
|
|
|
config RX_CHAN_INFO
|
|
bool
|
|
default y
|
|
|
|
config TXPD_RXPD_V3
|
|
bool
|
|
default y
|
|
|
|
endif # WIFI_NXP
|