119 lines
3.6 KiB
C
119 lines
3.6 KiB
C
/*
|
|
* Copyright (c) 2019 Linaro Limited
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
|
|
/**
|
|
* @file
|
|
* @brief System/hardware module for STM32H7 CM7 processor
|
|
*/
|
|
|
|
#include <zephyr/kernel.h>
|
|
#include <zephyr/device.h>
|
|
#include <zephyr/init.h>
|
|
#include <zephyr/cache.h>
|
|
#include <soc.h>
|
|
#include <stm32_ll_bus.h>
|
|
#include <stm32_ll_pwr.h>
|
|
#include <stm32_ll_rcc.h>
|
|
#include <stm32_ll_system.h>
|
|
#include "stm32_hsem.h"
|
|
|
|
#include <cmsis_core.h>
|
|
|
|
#if defined(CONFIG_STM32H7_DUAL_CORE)
|
|
static int stm32h7_m4_wakeup(void)
|
|
{
|
|
|
|
/* HW semaphore and SysCfg Clock enable */
|
|
LL_AHB4_GRP1_EnableClock(LL_AHB4_GRP1_PERIPH_HSEM);
|
|
LL_APB4_GRP1_EnableClock(LL_APB4_GRP1_PERIPH_SYSCFG);
|
|
|
|
if (READ_BIT(SYSCFG->UR1, SYSCFG_UR1_BCM4)) {
|
|
/* Cortex-M4 is waiting for end of system initialization made by
|
|
* Cortex-M7. This initialization is now finished,
|
|
* then Cortex-M7 takes HSEM so that CM4 can continue running.
|
|
*/
|
|
LL_HSEM_1StepLock(HSEM, CFG_HW_ENTRY_STOP_MODE_SEMID);
|
|
} else if (IS_ENABLED(CONFIG_STM32H7_BOOT_M4_AT_INIT)) {
|
|
/* CM4 is not started at boot, start it now */
|
|
LL_RCC_ForceCM4Boot();
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_STM32H7_DUAL_CORE */
|
|
|
|
/**
|
|
* @brief Perform basic hardware initialization at boot.
|
|
*
|
|
* This needs to be run from the very beginning.
|
|
* So the init priority has to be 0 (zero).
|
|
*
|
|
* @return 0
|
|
*/
|
|
static int stm32h7_init(void)
|
|
{
|
|
sys_cache_instr_enable();
|
|
sys_cache_data_enable();
|
|
|
|
/* Update CMSIS SystemCoreClock variable (HCLK) */
|
|
/* At reset, system core clock is set to 64 MHz from HSI */
|
|
SystemCoreClock = 64000000;
|
|
|
|
/* Power Configuration */
|
|
#if !defined(SMPS) && \
|
|
(defined(CONFIG_POWER_SUPPLY_DIRECT_SMPS) || \
|
|
defined(CONFIG_POWER_SUPPLY_SMPS_1V8_SUPPLIES_LDO) || \
|
|
defined(CONFIG_POWER_SUPPLY_SMPS_2V5_SUPPLIES_LDO) || \
|
|
defined(CONFIG_POWER_SUPPLY_SMPS_1V8_SUPPLIES_EXT_AND_LDO) || \
|
|
defined(CONFIG_POWER_SUPPLY_SMPS_2V5_SUPPLIES_EXT_AND_LDO) || \
|
|
defined(CONFIG_POWER_SUPPLY_SMPS_1V8_SUPPLIES_EXT) || \
|
|
defined(CONFIG_POWER_SUPPLY_SMPS_2V5_SUPPLIES_EXT))
|
|
#error Unsupported configuration: Selected SoC do not support SMPS
|
|
#endif
|
|
#if defined(CONFIG_POWER_SUPPLY_DIRECT_SMPS)
|
|
LL_PWR_ConfigSupply(LL_PWR_DIRECT_SMPS_SUPPLY);
|
|
#elif defined(CONFIG_POWER_SUPPLY_SMPS_1V8_SUPPLIES_LDO)
|
|
LL_PWR_ConfigSupply(LL_PWR_SMPS_1V8_SUPPLIES_LDO);
|
|
#elif defined(CONFIG_POWER_SUPPLY_SMPS_2V5_SUPPLIES_LDO)
|
|
LL_PWR_ConfigSupply(LL_PWR_SMPS_2V5_SUPPLIES_LDO);
|
|
#elif defined(CONFIG_POWER_SUPPLY_SMPS_1V8_SUPPLIES_EXT_AND_LDO)
|
|
LL_PWR_ConfigSupply(LL_PWR_SMPS_1V8_SUPPLIES_EXT_AND_LDO);
|
|
#elif defined(CONFIG_POWER_SUPPLY_SMPS_2V5_SUPPLIES_EXT_AND_LDO)
|
|
LL_PWR_ConfigSupply(LL_PWR_SMPS_2V5_SUPPLIES_EXT_AND_LDO);
|
|
#elif defined(CONFIG_POWER_SUPPLY_SMPS_1V8_SUPPLIES_EXT)
|
|
LL_PWR_ConfigSupply(LL_PWR_SMPS_1V8_SUPPLIES_EXT);
|
|
#elif defined(CONFIG_POWER_SUPPLY_SMPS_2V5_SUPPLIES_EXT)
|
|
LL_PWR_ConfigSupply(LL_PWR_SMPS_2V5_SUPPLIES_EXT);
|
|
#elif defined(CONFIG_POWER_SUPPLY_EXTERNAL_SOURCE)
|
|
LL_PWR_ConfigSupply(LL_PWR_EXTERNAL_SOURCE_SUPPLY);
|
|
#else
|
|
LL_PWR_ConfigSupply(LL_PWR_LDO_SUPPLY);
|
|
#endif
|
|
LL_PWR_SetRegulVoltageScaling(LL_PWR_REGU_VOLTAGE_SCALE1);
|
|
while (LL_PWR_IsActiveFlag_VOS() == 0) {
|
|
}
|
|
|
|
/* Errata ES0392 Rev 8:
|
|
* 2.2.9: Reading from AXI SRAM may lead to data read corruption
|
|
* Workaround: Set the READ_ISS_OVERRIDE bit in the AXI_TARG7_FN_MOD
|
|
* register.
|
|
* Applicable only to RevY (REV_ID 0x1003)
|
|
*/
|
|
if (LL_DBGMCU_GetRevisionID() == 0x1003) {
|
|
MODIFY_REG(GPV->AXI_TARG7_FN_MOD, 0x1, 0x1);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
SYS_INIT(stm32h7_init, PRE_KERNEL_1, 0);
|
|
|
|
|
|
#if defined(CONFIG_STM32H7_DUAL_CORE)
|
|
/* Unlock M4 once system configuration has been done */
|
|
SYS_INIT(stm32h7_m4_wakeup, POST_KERNEL, CONFIG_APPLICATION_INIT_PRIORITY);
|
|
#endif /* CONFIG_STM32H7_DUAL_CORE */
|