172 lines
4.5 KiB
C
172 lines
4.5 KiB
C
/*
|
|
* Copyright (c) 2022 Telink Semiconductor
|
|
*
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
|
|
#include "analog.h"
|
|
#include <zephyr/drivers/pinctrl.h>
|
|
#include <zephyr/dt-bindings/pinctrl/b91-pinctrl.h>
|
|
|
|
#define DT_DRV_COMPAT telink_b91_pinctrl
|
|
|
|
/**
|
|
* GPIO Function Enable Register
|
|
* ADDR PINS
|
|
* gpio_en: PORT_A[0-7]
|
|
* gpio_en + 1*8: PORT_B[0-7]
|
|
* gpio_en + 2*8: PORT_C[0-7]
|
|
* gpio_en + 3*8: PORT_D[0-7]
|
|
* gpio_en + 4*8: PORT_E[0-7]
|
|
* gpio_en + 5*8: PORT_F[0-7]
|
|
*/
|
|
#define reg_gpio_en(pin) (*(volatile uint8_t *)((uint32_t)DT_INST_REG_ADDR_BY_NAME(0, gpio_en) + \
|
|
((pin >> 8) * 8)))
|
|
|
|
/**
|
|
* Function Multiplexer Register
|
|
* ADDR PINS
|
|
* pin_mux: PORT_A[0-3]
|
|
* pin_mux + 1: PORT_A[4-7]
|
|
* pin_mux + 2: PORT_B[0-3]
|
|
* pin_mux + 3: PORT_B[4-7]
|
|
* pin_mux + 4: PORT_C[0-3]
|
|
* pin_mux + 5: PORT_C[4-7]
|
|
* pin_mux + 6: PORT_D[0-3]
|
|
* pin_mux + 7: PORT_D[4-7]
|
|
* pin_mux + 0x20: PORT_E[0-3]
|
|
* pin_mux + 0x21: PORT_E[4-7]
|
|
* pin_mux + 0x26: PORT_F[0-3]
|
|
* pin_mux + 0x27: PORT_F[4-7]
|
|
*/
|
|
#define reg_pin_mux(pin) (*(volatile uint8_t *)((uint32_t)DT_INST_REG_ADDR_BY_NAME(0, pin_mux) + \
|
|
(((pin >> 8) < 4) ? ((pin >> 8) * 2) : 0) + \
|
|
(((pin >> 8) == 4) ? 0x20 : 0) + \
|
|
(((pin >> 8) == 5) ? 0x26 : 0) + \
|
|
((pin & 0x0f0) ? 1 : 0)))
|
|
|
|
/**
|
|
* Pull Up resistors enable
|
|
* ADDR PINS
|
|
* pull_up_en: PORT_A[0-3]
|
|
* pull_up_en + 1: PORT_A[4-7]
|
|
* pull_up_en + 2: PORT_B[0-3]
|
|
* pull_up_en + 3: PORT_B[4-7]
|
|
* pull_up_en + 4: PORT_C[0-3]
|
|
* pull_up_en + 5: PORT_C[4-7]
|
|
* pull_up_en + 6: PORT_D[0-3]
|
|
* pull_up_en + 7: PORT_D[4-7]
|
|
* pull_up_en + 8: PORT_E[0-3]
|
|
* pull_up_en + 9: PORT_E[4-7]
|
|
* pull_up_en + 10: PORT_F[0-3]
|
|
* pull_up_en + 11: PORT_F[4-7]
|
|
*/
|
|
#define reg_pull_up_en(pin) ((uint8_t)(DT_INST_REG_ADDR_BY_NAME(0, pull_up_en) + \
|
|
((pin >> 8) * 2) + \
|
|
((pin & 0xf0) ? 1 : 0)))
|
|
|
|
/* Pinctrl driver initialization */
|
|
static int pinctrl_b91_init(void)
|
|
{
|
|
|
|
/* set pad_mul_sel register value from dts */
|
|
reg_gpio_pad_mul_sel |= DT_INST_PROP(0, pad_mul_sel);
|
|
|
|
return 0;
|
|
}
|
|
|
|
SYS_INIT(pinctrl_b91_init, PRE_KERNEL_1, CONFIG_KERNEL_INIT_PRIORITY_DEFAULT);
|
|
|
|
/* Act as GPIO function disable */
|
|
static inline void pinctrl_b91_gpio_function_disable(uint32_t pin)
|
|
{
|
|
uint8_t bit = pin & 0xff;
|
|
|
|
reg_gpio_en(pin) &= ~bit;
|
|
}
|
|
|
|
/* Get function value bits start position (offset) */
|
|
static inline int pinctrl_b91_get_offset(uint32_t pin, uint8_t *offset)
|
|
{
|
|
switch (B91_PINMUX_GET_PIN_ID(pin)) {
|
|
case B91_PIN_0:
|
|
*offset = B91_PIN_0_FUNC_POS;
|
|
break;
|
|
case B91_PIN_1:
|
|
*offset = B91_PIN_1_FUNC_POS;
|
|
break;
|
|
case B91_PIN_2:
|
|
*offset = B91_PIN_2_FUNC_POS;
|
|
break;
|
|
case B91_PIN_3:
|
|
*offset = B91_PIN_3_FUNC_POS;
|
|
break;
|
|
case B91_PIN_4:
|
|
*offset = B91_PIN_4_FUNC_POS;
|
|
break;
|
|
case B91_PIN_5:
|
|
*offset = B91_PIN_5_FUNC_POS;
|
|
break;
|
|
case B91_PIN_6:
|
|
*offset = B91_PIN_6_FUNC_POS;
|
|
break;
|
|
case B91_PIN_7:
|
|
*offset = B91_PIN_7_FUNC_POS;
|
|
break;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Set pin's function */
|
|
static int pinctrl_configure_pin(const pinctrl_soc_pin_t *pinctrl)
|
|
{
|
|
int status;
|
|
uint8_t mask;
|
|
uint8_t offset = 0;
|
|
uint8_t pull = B91_PINMUX_GET_PULL(*pinctrl);
|
|
uint8_t func = B91_PINMUX_GET_FUNC(*pinctrl);
|
|
uint32_t pin = B91_PINMUX_GET_PIN(*pinctrl);
|
|
uint8_t pull_up_en_addr = reg_pull_up_en(pin);
|
|
|
|
/* calculate offset and mask for the func and pull values */
|
|
status = pinctrl_b91_get_offset(pin, &offset);
|
|
if (status != 0) {
|
|
return status;
|
|
}
|
|
mask = (uint8_t) ~(BIT(offset) | BIT(offset + 1));
|
|
|
|
/* disable GPIO function (can be enabled back by GPIO init using GPIO driver) */
|
|
pinctrl_b91_gpio_function_disable(pin);
|
|
|
|
/* set func value */
|
|
func = func << offset;
|
|
reg_pin_mux(pin) = (reg_pin_mux(pin) & mask) | func;
|
|
|
|
/* set pull value */
|
|
pull = pull << offset;
|
|
analog_write_reg8(pull_up_en_addr, (analog_read_reg8(pull_up_en_addr) & mask) | pull);
|
|
|
|
return status;
|
|
}
|
|
|
|
/* API implementation: configure_pins */
|
|
int pinctrl_configure_pins(const pinctrl_soc_pin_t *pins, uint8_t pin_cnt, uintptr_t reg)
|
|
{
|
|
ARG_UNUSED(reg);
|
|
|
|
int status = 0;
|
|
|
|
for (uint8_t i = 0; i < pin_cnt; i++) {
|
|
status = pinctrl_configure_pin(pins++);
|
|
if (status < 0) {
|
|
break;
|
|
}
|
|
}
|
|
|
|
return status;
|
|
}
|