389 lines
12 KiB
ReStructuredText
389 lines
12 KiB
ReStructuredText
.. _ubx_bmd330eval_nrf52810:
|
|
|
|
u-blox EVK-BMD-330: BMD-330-EVAL
|
|
################################
|
|
|
|
Overview
|
|
********
|
|
|
|
The BMD-330-EVAL hardware provides support for the
|
|
u-blox BMD-330 Bluetooth 5 module, based on The
|
|
Nordic Semiconductor nRF52810 ARM Cortex-M4 CPU and
|
|
the following devices:
|
|
|
|
* :abbr:`ADC (Analog to Digital Converter)`
|
|
* CLOCK
|
|
* FLASH
|
|
* :abbr:`GPIO (General Purpose Input Output)`
|
|
* :abbr:`I2C (Inter-Integrated Circuit)`
|
|
* :abbr:`MPU (Memory Protection Unit)`
|
|
* :abbr:`NVIC (Nested Vectored Interrupt Controller)`
|
|
* :abbr:`PWM (Pulse Width Modulation)`
|
|
* RADIO (Bluetooth Low Energy)
|
|
* :abbr:`RTC (nRF RTC System Clock)`
|
|
* Segger RTT (RTT Console)
|
|
* :abbr:`SPI (Serial Peripheral Interface)`
|
|
* :abbr:`UART (Universal asynchronous receiver-transmitter)`
|
|
* :abbr:`WDT (Watchdog Timer)`
|
|
|
|
.. figure:: img/BMD-30-33-35-36-EVAL.jpg
|
|
:align: center
|
|
:alt: BMD-300-EVAL
|
|
|
|
BMD-300-EVAL (Credit: u-blox AG)
|
|
|
|
.. note::
|
|
The BMD-330-EVAL shares the same pin headers and assignments as the
|
|
BMD-300-EVAL. The BMD-300-EVAL is shown here.
|
|
|
|
More information about the BMD-330-EVAL and the BMD-330 module
|
|
can be found at the `u-blox website`_. All of the Nordic
|
|
Semiconductor examples for the nRF52 DK (nrf52dk_nrf52810)
|
|
may be used without modification.
|
|
|
|
Hardware
|
|
********
|
|
|
|
The BMD-330 on the BMD-330-EVAL contains an internal
|
|
high-frequency oscillator at 32MHz. There is also a low frequency
|
|
(slow) oscillator of 32.768kHz. The BMD-330 itself does not include
|
|
the slow crystal; however, the BMD-330-EVAL does.
|
|
|
|
.. note::
|
|
When targeting a custom design without a slow crystal,
|
|
be sure to modify code to utilize the internal RC
|
|
oscillator for the slow clock.
|
|
|
|
Supported Features
|
|
==================
|
|
|
|
The BMD-330-EVAL configuration supports the following
|
|
hardware features:
|
|
|
|
+-----------+------------+----------------------+
|
|
| Interface | Controller | Driver/Component |
|
|
+===========+============+======================+
|
|
| ADC | on-chip | adc |
|
|
+-----------+------------+----------------------+
|
|
| CLOCK | on-chip | clock_control |
|
|
+-----------+------------+----------------------+
|
|
| FLASH | on-chip | flash |
|
|
+-----------+------------+----------------------+
|
|
| GPIO | on-chip | gpio |
|
|
+-----------+------------+----------------------+
|
|
| I2C(M) | on-chip | i2c |
|
|
+-----------+------------+----------------------+
|
|
| MPU | on-chip | arch/arm |
|
|
+-----------+------------+----------------------+
|
|
| NVIC | on-chip | arch/arm |
|
|
+-----------+------------+----------------------+
|
|
| PWM | on-chip | pwm |
|
|
+-----------+------------+----------------------+
|
|
| RADIO | on-chip | Bluetooth |
|
|
+-----------+------------+----------------------+
|
|
| RTC | on-chip | system clock |
|
|
+-----------+------------+----------------------+
|
|
| RTT | Segger | console |
|
|
+-----------+------------+----------------------+
|
|
| SPI(M/S) | on-chip | spi |
|
|
+-----------+------------+----------------------+
|
|
| UART | on-chip | serial |
|
|
+-----------+------------+----------------------+
|
|
| WDT | on-chip | watchdog |
|
|
+-----------+------------+----------------------+
|
|
|
|
Other hardware features have not been enabled yet for this board.
|
|
See the `u-blox website`_ for a complete list of
|
|
BMD-330-EVAL hardware features.
|
|
|
|
Connections and IOs
|
|
===================
|
|
|
|
LED
|
|
---
|
|
|
|
* LED1 (red) = P0.17
|
|
* LED2 (red) = P0.18
|
|
* LED3 (green) = P0.19
|
|
* LED4 (green) = P0.20
|
|
* D5 (red) = OB LED 1
|
|
* D6 (green) = OB LED 2
|
|
|
|
Push buttons
|
|
------------
|
|
|
|
* BUTTON1 = SW1 = P0.13
|
|
* BUTTON2 = SW2 = P0.14
|
|
* BUTTON3 = SW3 = P0.15
|
|
* BUTTON4 = SW4 = P0.16
|
|
* BOOT = SW5 = boot/reset
|
|
|
|
External Connectors
|
|
-------------------
|
|
|
|
.. figure:: img/bmd-300-eval_pin_out.jpg
|
|
:align: center
|
|
:alt: BMD-300-EVAL pin-out
|
|
|
|
BMD-300-EVAL pin-out (Credit: u-blox AG)
|
|
|
|
.. note::
|
|
The BMD-330-EVAL shares the same pin headers and assignments
|
|
as the BMD-300-EVAL. The BMD-300-EVAL is shown here.
|
|
|
|
.. note::
|
|
The pin numbers noted below are referenced to
|
|
the pin 1 markings on the BMD-330-EVAL
|
|
for each header
|
|
|
|
J-Link Prog Connector (J2)
|
|
|
|
+-------+--------------+
|
|
| PIN # | Signal Name |
|
|
+=======+==============+
|
|
| 1 | VDD |
|
|
+-------+--------------+
|
|
| 2 | IMCU_TMSS |
|
|
+-------+--------------+
|
|
| 3 | GND |
|
|
+-------+--------------+
|
|
| 4 | IMCU_TCKS |
|
|
+-------+--------------+
|
|
| 5 | V5V |
|
|
+-------+--------------+
|
|
| 6 | IMCU_TDOS |
|
|
+-------+--------------+
|
|
| 7 | Cut off |
|
|
+-------+--------------+
|
|
| 8 | IMCU_TDIS |
|
|
+-------+--------------+
|
|
| 9 | Cut off |
|
|
+-------+--------------+
|
|
| 10 | IMCU_RESET |
|
|
+-------+--------------+
|
|
|
|
|
|
Debug OUT (J3)
|
|
|
|
+-------+----------------+
|
|
| PIN # | Signal Name |
|
|
+=======+================+
|
|
| 1 | EXT_VTG |
|
|
+-------+----------------+
|
|
| 2 | EXT_SWDIO |
|
|
+-------+----------------+
|
|
| 3 | GND |
|
|
+-------+----------------+
|
|
| 4 | EXT_SWDCLK |
|
|
+-------+----------------+
|
|
| 5 | GND |
|
|
+-------+----------------+
|
|
| 6 | EXT_SWO |
|
|
+-------+----------------+
|
|
| 7 | N/C |
|
|
+-------+----------------+
|
|
| 8 | N/C |
|
|
+-------+----------------+
|
|
| 9 | EXT_GND_DETECT |
|
|
+-------+----------------+
|
|
| 10 | EXT_RESET |
|
|
+-------+----------------+
|
|
|
|
|
|
Auxiliary (J9)
|
|
|
|
+-------+----------------+
|
|
| PIN # | Signal Name |
|
|
+=======+================+
|
|
| 1 | P0.10 |
|
|
+-------+----------------+
|
|
| 2 | P0.09 |
|
|
+-------+----------------+
|
|
| 3 | P0.08 |
|
|
+-------+----------------+
|
|
| 4 | P0.07 |
|
|
+-------+----------------+
|
|
| 5 | P0.06 |
|
|
+-------+----------------+
|
|
| 6 | P0.05 / AIN3 |
|
|
+-------+----------------+
|
|
| 7 | P0.21 / RESET |
|
|
+-------+----------------+
|
|
| 8 | P0.01 / XL2 |
|
|
+-------+----------------+
|
|
| 9 | P0.00 / XL1 |
|
|
+-------+----------------+
|
|
| 10 | GND |
|
|
+-------+----------------+
|
|
|
|
|
|
Arduino Headers
|
|
---------------
|
|
|
|
|
|
Power (J5)
|
|
|
|
+-------+--------------+-------------------------+
|
|
| PIN # | Signal Name | BMD-330 Functions |
|
|
+=======+==============+=========================+
|
|
| 1 | VSHLD | N/A |
|
|
+-------+--------------+-------------------------+
|
|
| 2 | VSHLD | N/A |
|
|
+-------+--------------+-------------------------+
|
|
| 3 | RESET | P0.21 / RESET |
|
|
+-------+--------------+-------------------------+
|
|
| 4 | VSHLD | N/A |
|
|
+-------+--------------+-------------------------+
|
|
| 5 | V5V | N/A |
|
|
+-------+--------------+-------------------------+
|
|
| 6 | GND | N/A |
|
|
+-------+--------------+-------------------------+
|
|
| 7 | GND | N/A |
|
|
+-------+--------------+-------------------------+
|
|
| 8 | N/C | N/A |
|
|
+-------+--------------+-------------------------+
|
|
|
|
Analog in (J8)
|
|
|
|
+-------+--------------+-------------------------+
|
|
| PIN # | Signal Name | BMD-330 Functions |
|
|
+=======+==============+=========================+
|
|
| 1 | A0 | P0.03 / AIN1 |
|
|
+-------+--------------+-------------------------+
|
|
| 2 | A1 | P0.04 / AIN2 |
|
|
+-------+--------------+-------------------------+
|
|
| 3 | A2 | P0.28 / AIN4 |
|
|
+-------+--------------+-------------------------+
|
|
| 4 | A3 | P0.29 / AIN5 |
|
|
+-------+--------------+-------------------------+
|
|
| 5 | A4 | P0.30 / AIN6 |
|
|
+-------+--------------+-------------------------+
|
|
| 6 | A5 | P0.31 / AIN7 |
|
|
+-------+--------------+-------------------------+
|
|
|
|
Digital I/O (J7)
|
|
|
|
+-------+--------------+----------------------------+
|
|
| PIN # | Signal Name | BMD-330 Functions |
|
|
+=======+==============+============================+
|
|
| 1 | D7 | P0.18 |
|
|
+-------+--------------+----------------------------+
|
|
| 2 | D6 | P0.17 |
|
|
+-------+--------------+----------------------------+
|
|
| 3 | D5 | P0.16 |
|
|
+-------+--------------+----------------------------+
|
|
| 4 | D4 | P0.15 |
|
|
+-------+--------------+----------------------------+
|
|
| 5 | D3 | P0.14 |
|
|
+-------+--------------+----------------------------+
|
|
| 6 | D2 | P0.13 |
|
|
+-------+--------------+----------------------------+
|
|
| 7 | D1 (TX) | P0.12 |
|
|
+-------+--------------+----------------------------+
|
|
| 8 | D0 (RX) | P0.11 |
|
|
+-------+--------------+----------------------------+
|
|
|
|
Digital I/O (J6)
|
|
|
|
+-------+--------------+-------------------------+
|
|
| PIN # | Signal Name | BMD-330 Functions |
|
|
+=======+==============+=========================+
|
|
| 1 | SCL | P0.27 |
|
|
+-------+--------------+-------------------------+
|
|
| 2 | SDA | P0.26 |
|
|
+-------+--------------+-------------------------+
|
|
| 3 | AREF | P0.02 / AIN0 |
|
|
+-------+--------------+-------------------------+
|
|
| 4 | GND | N/A |
|
|
+-------+--------------+-------------------------+
|
|
| 5 | D13 (SCK) | P0.25 |
|
|
+-------+--------------+-------------------------+
|
|
| 6 | D12 (MISO) | P0.24 |
|
|
+-------+--------------+-------------------------+
|
|
| 7 | D11 (MOSI) | P0.23 |
|
|
+-------+--------------+-------------------------+
|
|
| 8 | D10 (SS) | P0.22 |
|
|
+-------+--------------+-------------------------+
|
|
| 9 | D9 | P0.20 |
|
|
+-------+--------------+-------------------------+
|
|
| 10 | D8 | P0.19 |
|
|
+-------+--------------+-------------------------+
|
|
|
|
J11
|
|
|
|
+-------+--------------+-------------------------+
|
|
| PIN # | Signal Name | BMD-330 Functions |
|
|
+=======+==============+=========================+
|
|
| 1 | D12 (MISO) | P0.24 |
|
|
+-------+--------------+-------------------------+
|
|
| 2 | V5V | N/A |
|
|
+-------+--------------+-------------------------+
|
|
| 3 | D13 (SCK) | P0.25 |
|
|
+-------+--------------+-------------------------+
|
|
| 4 | D11 (MOSI) | P0.23 |
|
|
+-------+--------------+-------------------------+
|
|
| 5 | RESET | N/A |
|
|
+-------+--------------+-------------------------+
|
|
| 6 | N/A | N/A |
|
|
+-------+--------------+-------------------------+
|
|
|
|
Programming and Debugging
|
|
*************************
|
|
|
|
Flashing
|
|
========
|
|
|
|
Follow the instructions in the :ref:`nordic_segger` page to install
|
|
and configure all the necessary software. Further information can be
|
|
found in :ref:`nordic_segger_flashing`. Then build and flash
|
|
applications as usual (see :ref:`build_an_application` and
|
|
:ref:`application_run` for more details).
|
|
|
|
Here is an example for the :zephyr:code-sample:`hello_world` application.
|
|
|
|
First, run your favorite terminal program to listen for output.
|
|
|
|
.. code-block:: console
|
|
|
|
$ minicom -D <tty_device> -b 115200
|
|
|
|
Replace :code:`<tty_device>` with the port where the
|
|
BMD-330-EVAL can be found. For example, under Linux,
|
|
:code:`/dev/ttyACM0`.
|
|
|
|
Then build and flash the application in the usual way.
|
|
|
|
.. zephyr-app-commands::
|
|
:zephyr-app: samples/hello_world
|
|
:board: ubx_bmd330eval/nrf52810
|
|
:goals: build flash
|
|
|
|
Debugging
|
|
=========
|
|
|
|
Refer to the :ref:`nordic_segger` page to learn about debugging
|
|
u-blox boards with a Segger J-LINK-OB IC.
|
|
|
|
|
|
Testing the LEDs and buttons in the BMD-330-EVAL
|
|
************************************************
|
|
|
|
There are 2 samples that allow you to test that the buttons
|
|
(switches) and LEDs on the board are working properly with Zephyr:
|
|
|
|
.. code-block:: console
|
|
|
|
samples/basic/blinky
|
|
samples/basic/button
|
|
|
|
You can build and flash the examples to make sure Zephyr is
|
|
running correctly on your board. The button and LED definitions
|
|
can be found in :zephyr_file:`boards/u-blox/ubx_bmd330eval/ubx_bmd330eval_nrf52810.dts`.
|
|
|
|
References
|
|
**********
|
|
|
|
.. target-notes::
|
|
|
|
.. _u-blox website: https://www.u-blox.com/en/product/bmd-330-open-cpu
|