zephyr/boards/shields/arduino_uno_click/arduino_uno_click.overlay

60 lines
1.9 KiB
Plaintext

/*
* Copyright (c) 2023 Andriy Gelman
*
* SPDX-License-Identifier: Apache-2.0
*/
/ {
mikrobus_header_1: mikrobus-connector-1 {
compatible = "mikro-bus";
#gpio-cells = <2>;
gpio-map-mask = <0xffffffff 0xffffffc0>;
gpio-map-pass-thru = <0 0x3f>;
gpio-map = <0 0 &arduino_header 0 0>, /* AN -> A0 */
<1 0 &arduino_header 3 0>, /* RST -> A3 */
<2 0 &arduino_header 16 0>, /* CS -> D10 */
<3 0 &arduino_header 19 0>, /* SCK -> D13 */
<4 0 &arduino_header 18 0>, /* MISO -> D12 */
<5 0 &arduino_header 17 0>, /* MOSI -> D11 */
/* +3.3V */
/* GND */
<6 0 &arduino_header 12 0>, /* PWM -> D6 */
<7 0 &arduino_header 8 0>, /* INT -> D2 */
<8 0 &arduino_header 6 0>, /* RX -> D0 */
<9 0 &arduino_header 7 0>, /* TX -> D1 */
<10 0 &arduino_header 5 0>, /* SCL -> A5 */
<11 0 &arduino_header 4 0>; /* SDA -> A4 */
/* +5V */
/* GND */
};
mikrobus_header_2: mikrobus-connector-2 {
compatible = "mikro-bus";
#gpio-cells = <2>;
gpio-map-mask = <0xffffffff 0xffffffc0>;
gpio-map-pass-thru = <0 0x3f>;
gpio-map = <0 0 &arduino_header 1 0>, /* AN -> A1 */
<1 0 &arduino_header 2 0>, /* RST -> A2 */
<2 0 &arduino_header 15 0>, /* CS -> D9 */
<3 0 &arduino_header 19 0>, /* SCK -> D13 */
<4 0 &arduino_header 18 0>, /* MISO -> D12 */
<5 0 &arduino_header 17 0>, /* MOSI -> D11 */
/* +3.3V */
/* GND */
<6 0 &arduino_header 11 0>, /* PWM -> D5 */
<7 0 &arduino_header 9 0>, /* INT -> D3 */
<8 0 &arduino_header 6 0>, /* RX -> D0 */
<9 0 &arduino_header 7 0>, /* TX -> D1 */
<10 0 &arduino_header 5 0>, /* SCL -> A5 */
<11 0 &arduino_header 4 0>; /* SDA -> A4 */
/* +5V */
/* GND */
};
};
mikrobus_spi: &arduino_spi {};
mikrobus_serial: &arduino_serial {};
mikrobus_i2c: &arduino_i2c {};
mikrobus_header: &mikrobus_header_1 {};