80 lines
2.1 KiB
Plaintext
80 lines
2.1 KiB
Plaintext
CONFIG_NETWORKING=y
|
|
CONFIG_NET_LOG=y
|
|
CONFIG_NET_IPV6=y
|
|
CONFIG_NET_IPV4=y
|
|
CONFIG_NET_DHCPV4=n
|
|
CONFIG_NET_UDP=y
|
|
CONFIG_NET_TCP=y
|
|
CONFIG_NET_STATISTICS=y
|
|
CONFIG_NET_STATISTICS_USER_API=y
|
|
|
|
CONFIG_TEST_RANDOM_GENERATOR=y
|
|
|
|
CONFIG_NET_PKT_RX_COUNT=32
|
|
CONFIG_NET_PKT_TX_COUNT=32
|
|
CONFIG_NET_BUF_RX_COUNT=32
|
|
CONFIG_NET_BUF_TX_COUNT=32
|
|
CONFIG_NET_IF_UNICAST_IPV6_ADDR_COUNT=5
|
|
CONFIG_NET_IF_MCAST_IPV6_ADDR_COUNT=5
|
|
CONFIG_NET_IF_UNICAST_IPV4_ADDR_COUNT=1
|
|
CONFIG_NET_MAX_CONTEXTS=2
|
|
CONFIG_NET_IF_MAX_IPV6_COUNT=3
|
|
CONFIG_NET_IF_MAX_IPV4_COUNT=3
|
|
|
|
CONFIG_INIT_STACKS=y
|
|
CONFIG_PRINTK=y
|
|
CONFIG_NET_SHELL=y
|
|
|
|
# Ethernet is needed for LLDP
|
|
CONFIG_NET_L2_ETHERNET=y
|
|
|
|
CONFIG_NET_CONFIG_NEED_IPV6=y
|
|
CONFIG_NET_CONFIG_NEED_IPV4=y
|
|
CONFIG_NET_CONFIG_SETTINGS=y
|
|
|
|
# There will be three network interfaces. This is just an example
|
|
# how to do this kind of setup.
|
|
|
|
# First ethernet interface will use these settings
|
|
CONFIG_NET_CONFIG_MY_IPV6_ADDR="2001:db8::1"
|
|
CONFIG_NET_CONFIG_PEER_IPV6_ADDR="2001:db8::2"
|
|
CONFIG_NET_CONFIG_MY_IPV4_ADDR="192.0.2.1"
|
|
CONFIG_NET_CONFIG_PEER_IPV4_ADDR="192.0.2.2"
|
|
|
|
# Second ethernet interface will have these settings
|
|
CONFIG_NET_SAMPLE_IFACE2_MY_IPV6_ADDR="2001:db8:100::1"
|
|
# TEST-NET-2 from RFC 5737
|
|
CONFIG_NET_SAMPLE_IFACE2_MY_IPV4_ADDR="198.51.100.1"
|
|
# VLAN tag for the second interface
|
|
CONFIG_NET_SAMPLE_IFACE2_VLAN_TAG=100
|
|
|
|
# Settings for the third network interface
|
|
CONFIG_NET_SAMPLE_IFACE3_MY_IPV6_ADDR="2001:db8:200::1"
|
|
# TEST-NET-3 from RFC 5737
|
|
CONFIG_NET_SAMPLE_IFACE3_MY_IPV4_ADDR="203.0.113.1"
|
|
# VLAN tag for the second interface
|
|
CONFIG_NET_SAMPLE_IFACE3_VLAN_TAG=200
|
|
|
|
# Logging
|
|
CONFIG_LOG=y
|
|
|
|
# VLAN settings. We will have two VLANs in this sample.
|
|
CONFIG_NET_VLAN=y
|
|
CONFIG_NET_VLAN_COUNT=2
|
|
|
|
# LLDP settings
|
|
CONFIG_NET_LLDP=y
|
|
|
|
# The configuration here is just an example, you must set proper values
|
|
# according to your network needs. Also the ethernet driver must create
|
|
# LLDPDU and register it to LLDP sub-system.
|
|
CONFIG_NET_LLDP_PORT_ID_SUBTYPE=5
|
|
CONFIG_NET_LLDP_PORT_ID="lldp-test"
|
|
|
|
# How often to send LLDPDUs to network (in seconds)
|
|
CONFIG_NET_LLDP_TX_INTERVAL=30
|
|
|
|
# How many traffic classes to enable
|
|
CONFIG_NET_TC_TX_COUNT=6
|
|
CONFIG_NET_TC_RX_COUNT=4
|