159 lines
5.0 KiB
C
159 lines
5.0 KiB
C
/*
|
|
* Copyright (c) 2023 TOKITA Hiroshi <tokita.hiroshi@fujitsu.com>
|
|
* SPDX-License-Identifier: Apache-2.0
|
|
*/
|
|
|
|
#define DT_DRV_COMPAT raspberrypi_core_supply_regulator
|
|
|
|
#include <zephyr/devicetree.h>
|
|
#include <zephyr/drivers/regulator.h>
|
|
#include <zephyr/dt-bindings/regulator/rpi_pico.h>
|
|
#include <zephyr/sys/linear_range.h>
|
|
#include <zephyr/toolchain.h>
|
|
#include <hardware/regs/vreg_and_chip_reset.h>
|
|
#include <hardware/structs/vreg_and_chip_reset.h>
|
|
|
|
static const struct linear_range core_ranges[] = {
|
|
LINEAR_RANGE_INIT(800000u, 0u, 0u, 5u),
|
|
LINEAR_RANGE_INIT(850000u, 50000u, 6u, 15u),
|
|
};
|
|
|
|
static const size_t num_core_ranges = ARRAY_SIZE(core_ranges);
|
|
|
|
struct regulator_rpi_pico_config {
|
|
struct regulator_common_config common;
|
|
vreg_and_chip_reset_hw_t * const reg;
|
|
const bool brown_out_detection;
|
|
const uint32_t brown_out_threshold;
|
|
};
|
|
|
|
struct regulator_rpi_pico_data {
|
|
struct regulator_common_data data;
|
|
};
|
|
|
|
/*
|
|
* APIs
|
|
*/
|
|
|
|
static unsigned int regulator_rpi_pico_count_voltages(const struct device *dev)
|
|
{
|
|
return linear_range_group_values_count(core_ranges, num_core_ranges);
|
|
}
|
|
|
|
static int regulator_rpi_pico_list_voltage(const struct device *dev, unsigned int idx,
|
|
int32_t *volt_uv)
|
|
{
|
|
return linear_range_group_get_value(core_ranges, num_core_ranges, idx, volt_uv);
|
|
}
|
|
|
|
static int regulator_rpi_pico_set_voltage(const struct device *dev, int32_t min_uv, int32_t max_uv)
|
|
{
|
|
const struct regulator_rpi_pico_config *config = dev->config;
|
|
uint16_t idx;
|
|
int ret;
|
|
|
|
ret = linear_range_group_get_win_index(core_ranges, num_core_ranges, min_uv, max_uv, &idx);
|
|
if (ret < 0) {
|
|
return ret;
|
|
}
|
|
|
|
config->reg->vreg = ((config->reg->vreg & ~VREG_AND_CHIP_RESET_VREG_VSEL_BITS) |
|
|
(idx << VREG_AND_CHIP_RESET_VREG_VSEL_LSB));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int regulator_rpi_pico_get_voltage(const struct device *dev, int32_t *volt_uv)
|
|
{
|
|
const struct regulator_rpi_pico_config *config = dev->config;
|
|
|
|
return linear_range_group_get_value(
|
|
core_ranges, num_core_ranges,
|
|
((config->reg->vreg & VREG_AND_CHIP_RESET_VREG_VSEL_BITS) >>
|
|
VREG_AND_CHIP_RESET_VREG_VSEL_LSB),
|
|
volt_uv);
|
|
}
|
|
|
|
static int regulator_rpi_pico_enable(const struct device *dev)
|
|
{
|
|
const struct regulator_rpi_pico_config *config = dev->config;
|
|
|
|
config->reg->vreg |= BIT(VREG_AND_CHIP_RESET_VREG_EN_LSB);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int regulator_rpi_pico_disable(const struct device *dev)
|
|
{
|
|
const struct regulator_rpi_pico_config *config = dev->config;
|
|
|
|
config->reg->vreg &= ~BIT(VREG_AND_CHIP_RESET_VREG_EN_LSB);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int regulator_rpi_pico_set_mode(const struct device *dev, regulator_mode_t mode)
|
|
{
|
|
const struct regulator_rpi_pico_config *config = dev->config;
|
|
|
|
if (mode & REGULATOR_RPI_PICO_MODE_HI_Z) {
|
|
config->reg->vreg |= REGULATOR_RPI_PICO_MODE_HI_Z;
|
|
} else {
|
|
config->reg->vreg &= (~REGULATOR_RPI_PICO_MODE_HI_Z);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int regulator_rpi_pico_get_mode(const struct device *dev, regulator_mode_t *mode)
|
|
{
|
|
const struct regulator_rpi_pico_config *config = dev->config;
|
|
|
|
*mode = (config->reg->vreg & REGULATOR_RPI_PICO_MODE_HI_Z);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int regulator_rpi_pico_init(const struct device *dev)
|
|
{
|
|
const struct regulator_rpi_pico_config *config = dev->config;
|
|
|
|
if (config->brown_out_detection) {
|
|
config->reg->bod =
|
|
(BIT(VREG_AND_CHIP_RESET_BOD_EN_LSB) |
|
|
(config->brown_out_threshold << VREG_AND_CHIP_RESET_BOD_VSEL_LSB));
|
|
} else {
|
|
config->reg->bod &= ~BIT(VREG_AND_CHIP_RESET_BOD_EN_LSB);
|
|
}
|
|
|
|
regulator_common_data_init(dev);
|
|
|
|
return regulator_common_init(dev, true);
|
|
}
|
|
|
|
static const struct regulator_driver_api api = {
|
|
.enable = regulator_rpi_pico_enable,
|
|
.disable = regulator_rpi_pico_disable,
|
|
.count_voltages = regulator_rpi_pico_count_voltages,
|
|
.list_voltage = regulator_rpi_pico_list_voltage,
|
|
.set_voltage = regulator_rpi_pico_set_voltage,
|
|
.get_voltage = regulator_rpi_pico_get_voltage,
|
|
.set_mode = regulator_rpi_pico_set_mode,
|
|
.get_mode = regulator_rpi_pico_get_mode,
|
|
};
|
|
|
|
#define REGULATOR_RPI_PICO_DEFINE_ALL(inst) \
|
|
static struct regulator_rpi_pico_data data_##inst; \
|
|
\
|
|
static const struct regulator_rpi_pico_config config_##inst = { \
|
|
.common = REGULATOR_DT_COMMON_CONFIG_INIT(inst), \
|
|
.reg = (vreg_and_chip_reset_hw_t * const)DT_INST_REG_ADDR(inst), \
|
|
.brown_out_detection = DT_INST_PROP(inst, raspberrypi_brown_out_detection), \
|
|
.brown_out_threshold = DT_INST_ENUM_IDX(inst, raspberrypi_brown_out_threshold), \
|
|
}; \
|
|
\
|
|
DEVICE_DT_INST_DEFINE(inst, regulator_rpi_pico_init, NULL, &data_##inst, &config_##inst, \
|
|
POST_KERNEL, CONFIG_REGULATOR_RPI_PICO_INIT_PRIORITY, &api);
|
|
|
|
DT_INST_FOREACH_STATUS_OKAY(REGULATOR_RPI_PICO_DEFINE_ALL)
|