zephyr/boards/microchip/ev11l78a/ev11l78a.dts

125 lines
2.2 KiB
Plaintext

/*
* Copyright (c) 2023, Meta Platforms, Inc. and its affiliates.
*
* SPDX-License-Identifier: Apache-2.0
*/
/dts-v1/;
#include <freq.h>
#include <mem.h>
#include <atmel/samd20.dtsi>
#include <atmel/samx2xx16.dtsi>
#include "ev11l78a-pinctrl.dtsi"
/ {
model = "Microchip EV11L78A";
compatible = "atmel,samd20e16", "atmel,samd20";
aliases {
led0 = &cap_mis_led;
spi0 = &sercom0;
i2c0 = &sercom3;
};
chosen {
zephyr,console = &sercom1;
zephyr,shell-uart = &sercom1;
zephyr,sram = &sram0;
zephyr,flash = &flash0;
};
leds {
compatible = "gpio-leds";
cap_mis_led: led_0 {
gpios = <&porta 23 GPIO_ACTIVE_HIGH>;
label = "CAP_MIS";
};
};
csa_i_sense: i_sense {
compatible = "current-sense-amplifier";
io-channels = <&adc 5>;
sense-resistor-milli-ohms = <4>;
sense-gain-mult = <100>;
};
};
&cpu0 {
clock-frequency = <DT_FREQ_M(48)>;
};
&sercom0 {
status = "okay";
compatible = "atmel,sam0-spi";
dipo = <0>;
dopo = <2>;
#address-cells = <1>;
#size-cells = <0>;
cs-gpios = <&porta 10 GPIO_ACTIVE_LOW>;
pinctrl-0 = <&sercom0_spi_default>;
pinctrl-names = "default";
};
&sercom1 {
status = "okay";
compatible = "atmel,sam0-uart";
current-speed = <115200>;
rxpo = <3>;
txpo = <1>;
pinctrl-0 = <&sercom1_uart_default>;
pinctrl-names = "default";
};
&sercom3 {
status = "okay";
compatible = "atmel,sam0-i2c";
clock-frequency = <I2C_BITRATE_HIGH>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-0 = <&sercom3_i2c_default>;
pinctrl-names = "default";
};
&flash0 {
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
/*
* The final 16 KiB is reserved for the application.
* Storage partition will be used by FCB/LittleFS/NVS
* if enabled.
*/
storage_partition: partition@c000 {
label = "storage";
reg = <DT_SIZE_K(64-16) DT_SIZE_K(16)>;
};
};
};
&adc {
status = "okay";
prescaler = <32>;
#address-cells = <1>;
#size-cells = <0>;
channel@4 {
reg = <4>;
zephyr,gain = "ADC_GAIN_1_2";
zephyr,reference = "ADC_REF_VDD_1_2";
zephyr,vref-mv = <1650>;
zephyr,acquisition-time = <ADC_ACQ_TIME_DEFAULT>;
zephyr,resolution = <12>;
zephyr,input-positive = <4>;
};
pinctrl-0 = <&adc_default>;
pinctrl-names = "default";
};