/*
 * Copyright (c) 2024 Nordic Semiconductor ASA
 *
 * SPDX-License-Identifier: Apache-2.0
 */

#include <mem.h>
#include <nordic/nrf_common.dtsi>
#include <zephyr/dt-bindings/adc/nrf-saadc.h>
#include <zephyr/dt-bindings/misc/nordic-nrf-ficr-nrf9230-engb.h>
#include <zephyr/dt-bindings/misc/nordic-domain-id-nrf9230.h>
#include <zephyr/dt-bindings/misc/nordic-owner-id-nrf9230.h>
#include <zephyr/dt-bindings/reserved-memory/nordic-owned-memory.h>

/delete-node/ &sw_pwm;

/ {
	#address-cells = <1>;
	#size-cells = <1>;

	cpus {
		#address-cells = <1>;
		#size-cells = <0>;

		cpuapp: cpu@2 {
			compatible = "arm,cortex-m33";
			reg = <2>;
			device_type = "cpu";
			clock-frequency = <DT_FREQ_M(320)>;
		};

		cpurad: cpu@3 {
			compatible = "arm,cortex-m33";
			reg = <3>;
			device_type = "cpu";
			clock-frequency = <DT_FREQ_M(256)>;
		};

		cpuppr: cpu@d {
			compatible = "nordic,vpr";
			reg = <13>;
			device_type = "cpu";
			clock-frequency = <DT_FREQ_M(16)>;
			riscv,isa = "rv32emc";
			nordic,bus-width = <32>;

			cpuppr_vevif_rx: mailbox {
				compatible = "nordic,nrf-vevif-task-rx";
				status = "disabled";
				interrupt-parent = <&cpuppr_clic>;
				interrupts = <0 NRF_DEFAULT_IRQ_PRIORITY>,
					     <1 NRF_DEFAULT_IRQ_PRIORITY>,
					     <2 NRF_DEFAULT_IRQ_PRIORITY>,
					     <3 NRF_DEFAULT_IRQ_PRIORITY>,
					     <4 NRF_DEFAULT_IRQ_PRIORITY>,
					     <5 NRF_DEFAULT_IRQ_PRIORITY>,
					     <6 NRF_DEFAULT_IRQ_PRIORITY>,
					     <7 NRF_DEFAULT_IRQ_PRIORITY>,
					     <8 NRF_DEFAULT_IRQ_PRIORITY>,
					     <9 NRF_DEFAULT_IRQ_PRIORITY>,
					     <10 NRF_DEFAULT_IRQ_PRIORITY>,
					     <11 NRF_DEFAULT_IRQ_PRIORITY>,
					     <12 NRF_DEFAULT_IRQ_PRIORITY>,
					     <13 NRF_DEFAULT_IRQ_PRIORITY>,
					     <14 NRF_DEFAULT_IRQ_PRIORITY>,
					     <15 NRF_DEFAULT_IRQ_PRIORITY>;
				#mbox-cells = <1>;
				nordic,tasks = <16>;
				nordic,tasks-mask = <0x0000fff0>;
			};
		};
	};

	reserved-memory {
		#address-cells = <1>;
		#size-cells = <1>;
	};

	clocks {
		hfxo: hfxo {
			compatible = "fixed-clock";
			#clock-cells = <0>;
			clock-frequency = <DT_FREQ_M(32)>;
		};

		fll16m: fll16m {
			compatible = "fixed-clock";
			#clock-cells = <0>;
			clock-frequency = <DT_FREQ_M(16)>;
		};
	};

	soc {
		#address-cells = <1>;
		#size-cells = <1>;

		mram1x: mram@e000000 {
			compatible = "nordic,mram";
			reg = <0xe000000 DT_SIZE_K(8192)>;
			erase-block-size = <4096>;
			write-block-size = <16>;
		};

		cpuapp_uicr: uicr@fff8000 {
			compatible = "nordic,nrf-uicr-v2";
			reg = <0xfff8000 DT_SIZE_K(2)>;
			domain = <2>;
		};

		cpurad_uicr: uicr@fffa000 {
			compatible = "nordic,nrf-uicr-v2";
			reg = <0xfffa000 DT_SIZE_K(2)>;
			domain = <3>;
		};

		ficr: ficr@fffe000 {
			compatible = "nordic,nrf-ficr";
			reg = <0xfffe000 DT_SIZE_K(2)>;
			#nordic,ficr-cells = <1>;
		};

		cpuapp_ram0: sram@22000000 {
			compatible = "mmio-sram";
			reg = <0x22000000 DT_SIZE_K(32)>;
			#address-cells = <1>;
			#size-cells = <1>;
			ranges = <0x0 0x22000000 0x8000>;
		};

		cpurad_ram0: sram@23000000 {
			compatible = "mmio-sram";
			reg = <0x23000000 DT_SIZE_K(192)>;
			#address-cells = <1>;
			#size-cells = <1>;
			ranges = <0x0 0x23000000 0x30000>;
		};

		cpurad_ram1: sram@23040000 {
			compatible = "mmio-sram";
			reg = <0x23040000 DT_SIZE_K(32)>;
			#address-cells = <1>;
			#size-cells = <1>;
			ranges = <0x0 0x23040000 0x8000>;
		};

		cpuapp_peripherals: peripheral@52000000 {
			#address-cells = <1>;
			#size-cells = <1>;
			ranges = <0x0 0x52000000 0x1000000>;

			cpuapp_hsfll: clock@d000 {
				compatible = "nordic,nrf-hsfll";
				#clock-cells = <0>;
				reg = <0xd000 0x1000>;
				clocks = <&fll16m>;
				clock-frequency = <DT_FREQ_M(320)>;
				nordic,ficrs =
					<&ficr NRF_FICR_TRIM_APPLICATION_HSFLL_TRIM_VSUP>,
					<&ficr NRF_FICR_TRIM_APPLICATION_HSFLL_TRIM_COARSE_0>,
					<&ficr NRF_FICR_TRIM_APPLICATION_HSFLL_TRIM_FINE_0>;
				nordic,ficr-names = "vsup", "coarse", "fine";
			};

			cpuapp_ipct: ipct@13000 {
				compatible = "nordic,nrf-ipct-local";
				reg = <0x13000 0x1000>;
				status = "disabled";
				channels = <4>;
				interrupts = <64 NRF_DEFAULT_IRQ_PRIORITY>,
					     <65 NRF_DEFAULT_IRQ_PRIORITY>;
			};

			cpuapp_wdt010: watchdog@14000 {
				compatible = "nordic,nrf-wdt";
				reg = <0x14000 0x1000>;
				status = "disabled";
				interrupts = <20 NRF_DEFAULT_IRQ_PRIORITY>;
			};

			cpuapp_wdt011: watchdog@15000 {
				compatible = "nordic,nrf-wdt";
				reg = <0x15000 0x1000>;
				status = "disabled";
				interrupts = <21 NRF_DEFAULT_IRQ_PRIORITY>;
			};

			cpuapp_ieee802154: ieee802154 {
				compatible = "nordic,nrf-ieee802154";
				status = "disabled";
			};

			cpuapp_resetinfo: resetinfo@1e000 {
				compatible = "nordic,nrf-resetinfo";
				reg = <0x1e000 0x1000>;
			};
		};

		cpurad_peripherals: peripheral@53000000 {
			#address-cells = <1>;
			#size-cells = <1>;
			ranges = <0x0 0x53000000 0x1000000>;

			cpurad_hsfll: clock@d000 {
				compatible = "nordic,nrf-hsfll";
				#clock-cells = <0>;
				reg = <0xd000 0x1000>;
				clocks = <&fll16m>;
				clock-frequency = <DT_FREQ_M(256)>;
				nordic,ficrs =
					<&ficr NRF_FICR_TRIM_RADIOCORE_HSFLL_TRIM_VSUP>,
					<&ficr NRF_FICR_TRIM_RADIOCORE_HSFLL_TRIM_COARSE_1>,
					<&ficr NRF_FICR_TRIM_RADIOCORE_HSFLL_TRIM_FINE_1>;
				nordic,ficr-names = "vsup", "coarse", "fine";
			};

			cpurad_wdt010: watchdog@13000 {
				compatible = "nordic,nrf-wdt";
				reg = <0x13000 0x1000>;
				status = "disabled";
				interrupts = <19 NRF_DEFAULT_IRQ_PRIORITY>;
			};

			cpurad_wdt011: watchdog@14000 {
				compatible = "nordic,nrf-wdt";
				reg = <0x14000 0x1000>;
				status = "disabled";
				interrupts = <20 NRF_DEFAULT_IRQ_PRIORITY>;
			};

			cpurad_resetinfo: resetinfo@1e000 {
				compatible = "nordic,nrf-resetinfo";
				reg = <0x1e000 0x1000>;
			};

			dppic020: dppic@22000 {
				compatible = "nordic,nrf-dppic-local";
				reg = <0x22000 0x1000>;
				status = "disabled";
			};

			cpurad_ipct: ipct@24000 {
				compatible = "nordic,nrf-ipct-local";
				reg = <0x24000 0x1000>;
				status = "disabled";
				channels = <8>;
				interrupts = <64 NRF_DEFAULT_IRQ_PRIORITY>,
					     <65 NRF_DEFAULT_IRQ_PRIORITY>;
			};

			egu020: egu@25000 {
				compatible = "nordic,nrf-egu";
				reg = <0x25000 0x1000>;
				status = "disabled";
				interrupts = <37 NRF_DEFAULT_IRQ_PRIORITY>;
			};

			timer020: timer@28000 {
				compatible = "nordic,nrf-timer";
				reg = <0x28000 0x1000>;
				status = "disabled";
				cc-num = <8>;
				interrupts = <40 NRF_DEFAULT_IRQ_PRIORITY>;
				max-bit-width = <32>;
				max-frequency = <DT_FREQ_M(32)>;
				prescaler = <0>;
			};

			timer021: timer@29000 {
				compatible = "nordic,nrf-timer";
				reg = <0x29000 0x1000>;
				status = "disabled";
				cc-num = <8>;
				interrupts = <41 NRF_DEFAULT_IRQ_PRIORITY>;
				max-bit-width = <32>;
				max-frequency = <DT_FREQ_M(32)>;
				prescaler = <0>;
			};

			timer022: timer@2a000 {
				compatible = "nordic,nrf-timer";
				reg = <0x2a000 0x1000>;
				status = "disabled";
				cc-num = <8>;
				interrupts = <42 NRF_DEFAULT_IRQ_PRIORITY>;
				max-bit-width = <32>;
				max-frequency = <DT_FREQ_M(32)>;
				prescaler = <0>;
			};

			rtc: rtc@2b000 {
				compatible = "nordic,nrf-rtc";
				reg = <0x2b000 0x1000>;
				status = "disabled";
				cc-num = <4>;
				clock-frequency = <32768>;
				interrupts = <43 NRF_DEFAULT_IRQ_PRIORITY>;
				prescaler = <1>;
			};

			radio: radio@2c000 {
				compatible = "nordic,nrf-radio";
				reg = <0x2c000 0x1000>;
				status = "disabled";
				ble-2mbps-supported;
				ble-coded-phy-supported;
				dfe-supported;
				ieee802154-supported;
				interrupts = <44 NRF_DEFAULT_IRQ_PRIORITY>;

				cpurad_ieee802154: ieee802154 {
					compatible = "nordic,nrf-ieee802154";
					status = "disabled";
				};
			};

			ccm030: ccm@3a000 {
				compatible = "nordic,nrf-ccm";
				reg = <0x3a000 0x1000>;
				interrupts = <58 NRF_DEFAULT_IRQ_PRIORITY>;
				status = "disabled";
			};

			ecb030: ecb@3b000 {
				compatible = "nordic,nrf-ecb";
				reg = <0x3b000 0x1000>;
				interrupts = <59 NRF_DEFAULT_IRQ_PRIORITY>;
				status = "disabled";
			};

			ccm031: ccm@3c000 {
				compatible = "nordic,nrf-ccm";
				reg = <0x3c000 0x1000>;
				interrupts = <60 NRF_DEFAULT_IRQ_PRIORITY>;
				status = "disabled";
			};

			ecb031: ecb@3d000 {
				compatible = "nordic,nrf-ecb";
				reg = <0x3d000 0x1000>;
				status = "disabled";
				interrupts = <61 NRF_DEFAULT_IRQ_PRIORITY>;
			};
		};

		global_peripherals: peripheral@5f000000 {
			#address-cells = <1>;
			#size-cells = <1>;
			ranges = <0x0 0x5f000000 0x1000000>;

			usbhs: usbhs@86000 {
				compatible = "nordic,nrf-usbhs", "snps,dwc2";
				reg = <0x86000 0x1000>, <0x2f700000 0x40000>;
				reg-names = "wrapper", "core";
				interrupts = <134 NRF_DEFAULT_IRQ_PRIORITY>;
				num-in-eps = <8>;
				num-out-eps = <10>;
				ghwcfg1 = <0xaa555000>;
				ghwcfg2 = <0x22abfc72>;
				ghwcfg4 = <0x1e10aa60>;
				status = "disabled";
			};

			exmif: spi@95000 {
				compatible = "nordic,nrf-exmif";
				#address-cells = <1>;
				#size-cells = <0>;
				reg = <0x95000 0x500 0x95500 0xb00>;
				reg-names = "wrapper", "core";
				interrupts = <149 NRF_DEFAULT_IRQ_PRIORITY>;
				clock-frequency = <DT_FREQ_M(400)>;
				fifo-depth = <32>;
				max-xfer-size = <16>;
				status = "disabled";
			};

			cpusec_bellboard: mailbox@99000 {
				reg = <0x99000 0x1000>;
				status = "disabled";
				#mbox-cells = <1>;
			};

			cpuapp_bellboard: mailbox@9a000 {
				reg = <0x9a000 0x1000>;
				status = "disabled";
				#mbox-cells = <1>;
			};

			cpurad_bellboard: mailbox@9b000 {
				reg = <0x9b000 0x1000>;
				status = "disabled";
				#mbox-cells = <1>;
			};

			cpucell_bellboard: mailbox@9c000 {
				reg = <0x9c000 0x1000>;
				status = "disabled";
				#mbox-cells = <1>;
			};

			canpll: clock-controller@8c2000{
				compatible = "nordic,nrf-auxpll";
				reg = <0x8c2000 0x1000>;
				interrupts = <194 NRF_DEFAULT_IRQ_PRIORITY>;
				clocks = <&hfxo>;
				#clock-cells = <0>;
				nordic,ficrs = <&ficr NRF_FICR_TRIM_GLOBAL_CANPLL_TRIM_CTUNE>;
				nordic,frequency = <0>;
				nordic,out-div = <2>;
				nordic,out-drive = <0>;
				nordic,current-tune = <6>;
				nordic,sdm-disable;
				nordic,range = "high";
				status = "disabled";
			};

			cpusys_vevif_tx: mailbox@8c8000 {
				compatible = "nordic,nrf-vevif-task-tx";
				reg = <0x8c8000 0x1000>;
				status = "disabled";
				#mbox-cells = <1>;
				nordic,tasks = <32>;
				nordic,tasks-mask = <0xfffff0ff>;
			};

			ipct120: ipct@8d1000 {
				compatible = "nordic,nrf-ipct-global";
				reg = <0x8d1000 0x1000>;
				status = "disabled";
				channels = <8>;
				global-domain-id = <12>;
			};

			can120: can@8d8000 {
				compatible = "nordic,nrf-can";
				reg = <0x8d8000 0x400>, <0x2fbef800 0x800>, <0x2fbe8000 0x7800>;
				reg-names = "wrapper", "m_can", "message_ram";
				interrupts = <216 NRF_DEFAULT_IRQ_PRIORITY>;
				clocks = <&canpll>;
				bosch,mram-cfg = <0x0 28 8 3 3 0 1 1>;
				status = "disabled";
			};

			can121: can@8db000 {
				compatible = "nordic,nrf-can";
				reg = <0x8db000 0x400>, <0x2fbf7800 0x800>, <0x2fbf0000 0x7800>;
				reg-names = "wrapper", "m_can", "message_ram";
				interrupts = <219 NRF_DEFAULT_IRQ_PRIORITY>;
				clocks = <&canpll>;
				bosch,mram-cfg = <0x0 28 8 3 3 0 1 1>;
				status = "disabled";
			};

			dppic120: dppic@8e1000 {
				compatible = "nordic,nrf-dppic-global";
				reg = <0x8e1000 0x1000>;
				status = "disabled";
			};

			timer120: timer@8e2000 {
				compatible = "nordic,nrf-timer";
				reg = <0x8e2000 0x1000>;
				status = "disabled";
				cc-num = <6>;
				interrupts = <226 NRF_DEFAULT_IRQ_PRIORITY>;
				max-bit-width = <32>;
				max-frequency = <DT_FREQ_M(320)>;
				prescaler = <0>;
			};

			timer121: timer@8e3000 {
				compatible = "nordic,nrf-timer";
				reg = <0x8e3000 0x1000>;
				status = "disabled";
				cc-num = <6>;
				interrupts = <227 NRF_DEFAULT_IRQ_PRIORITY>;
				max-bit-width = <32>;
				max-frequency = <DT_FREQ_M(320)>;
				prescaler = <0>;
			};

			pwm120: pwm@8e4000 {
				compatible = "nordic,nrf-pwm";
				reg = <0x8e4000 0x1000>;
				status = "disabled";
				interrupts = <228 NRF_DEFAULT_IRQ_PRIORITY>;
				#pwm-cells = <3>;
			};

			spi120: spi@8e6000 {
				compatible = "nordic,nrf-spim";
				reg = <0x8e6000 0x1000>;
				status = "disabled";
				easydma-maxcnt-bits = <15>;
				interrupts = <230 NRF_DEFAULT_IRQ_PRIORITY>;
				max-frequency = <DT_FREQ_M(32)>;
				#address-cells = <1>;
				#size-cells = <0>;
				rx-delay-supported;
				rx-delay = <1>;
				nordic,clockpin-enable = <NRF_FUN_SPIM_SCK>,
							 <NRF_FUN_SPIS_SCK>;
			};

			uart120: uart@8e6000 {
				compatible = "nordic,nrf-uarte";
				reg = <0x8e6000 0x1000>;
				status = "disabled";
				interrupts = <230 NRF_DEFAULT_IRQ_PRIORITY>;
				endtx-stoptx-supported;
				frame-timeout-supported;
			};

			spi121: spi@8e7000 {
				compatible = "nordic,nrf-spim";
				reg = <0x8e7000 0x1000>;
				status = "disabled";
				easydma-maxcnt-bits = <15>;
				interrupts = <231 NRF_DEFAULT_IRQ_PRIORITY>;
				max-frequency = <DT_FREQ_M(32)>;
				#address-cells = <1>;
				#size-cells = <0>;
				rx-delay-supported;
				rx-delay = <1>;
				nordic,clockpin-enable = <NRF_FUN_SPIM_SCK>,
							 <NRF_FUN_SPIS_SCK>;
			};

			cpuppr_vpr: vpr@908000 {
				compatible = "nordic,nrf-vpr-coprocessor";
				reg = <0x908000 0x1000>;
				status = "disabled";
				#address-cells = <1>;
				#size-cells = <1>;
				ranges = <0x0 0x908000 0x1000>;

				cpuppr_vevif_tx: mailbox@0 {
					compatible = "nordic,nrf-vevif-task-tx";
					reg = <0x0 0x1000>;
					status = "disabled";
					#mbox-cells = <1>;
					nordic,tasks = <16>;
					nordic,tasks-mask = <0x0000fff0>;
				};
			};

			ipct130: ipct@921000 {
				compatible = "nordic,nrf-ipct-global";
				reg = <0x921000 0x1000>;
				status = "disabled";
				channels = <8>;
				global-domain-id = <13>;
			};

			dppic130: dppic@922000 {
				compatible = "nordic,nrf-dppic-global";
				reg = <0x922000 0x1000>;
				status = "disabled";
			};

			rtc130: rtc@928000 {
				compatible = "nordic,nrf-rtc";
				reg = <0x928000 0x1000>;
				status = "disabled";
				cc-num = <4>;
				clock-frequency = <32768>;
				interrupts = <296 NRF_DEFAULT_IRQ_PRIORITY>;
				prescaler = <1>;
			};

			rtc131: rtc@929000 {
				compatible = "nordic,nrf-rtc";
				reg = <0x929000 0x1000>;
				status = "disabled";
				cc-num = <4>;
				clock-frequency = <32768>;
				interrupts = <297 NRF_DEFAULT_IRQ_PRIORITY>;
				prescaler = <1>;
			};

			wdt131: watchdog@92b000 {
				compatible = "nordic,nrf-wdt";
				reg = <0x92b000 0x1000>;
				status = "disabled";
				interrupts = <299 NRF_DEFAULT_IRQ_PRIORITY>;
			};

			wdt132: watchdog@92c000 {
				compatible = "nordic,nrf-wdt";
				reg = <0x92c000 0x1000>;
				status = "disabled";
				interrupts = <300 NRF_DEFAULT_IRQ_PRIORITY>;
			};

			gpiote130: gpiote@934000 {
				compatible = "nordic,nrf-gpiote";
				reg = <0x934000 0x1000>;
				status = "disabled";
				instance = <130>;
			};

			gpiote131: gpiote@935000 {
				compatible = "nordic,nrf-gpiote";
				reg = <0x935000 0x1000>;
				status = "disabled";
				instance = <131>;
			};

			gpio0: gpio@938000 {
				compatible = "nordic,nrf-gpio";
				reg = <0x938000 0x200>;
				status = "disabled";
				#gpio-cells = <2>;
				gpio-controller;
				gpiote-instance = <&gpiote130>;
				ngpios = <13>;
				port = <0>;
			};

			gpio1: gpio@938200 {
				compatible = "nordic,nrf-gpio";
				reg = <0x938200 0x200>;
				status = "disabled";
				#gpio-cells = <2>;
				gpio-controller;
				gpiote-instance = <&gpiote130>;
				ngpios = <12>;
				port = <1>;
			};

			gpio2: gpio@938400 {
				compatible = "nordic,nrf-gpio";
				reg = <0x938400 0x200>;
				status = "disabled";
				#gpio-cells = <2>;
				gpio-controller;
				gpiote-instance = <&gpiote130>;
				ngpios = <12>;
				port = <2>;
			};

			gpio6: gpio@938c00 {
				compatible = "nordic,nrf-gpio";
				reg = <0x938c00 0x200>;
				status = "disabled";
				#gpio-cells = <2>;
				gpio-controller;
				ngpios = <14>;
				port = <6>;
			};

			gpio8: gpio@939000 {
				compatible = "nordic,nrf-gpio";
				reg = <0x939000 0x200>;
				status = "disabled";
				#gpio-cells = <2>;
				gpio-controller;
				ngpios = <5>;
				port = <8>;
			};

			gpio9: gpio@939200 {
				compatible = "nordic,nrf-gpio";
				reg = <0x939200 0x200>;
				status = "disabled";
				#gpio-cells = <2>;
				gpio-controller;
				gpiote-instance = <&gpiote130>;
				ngpios = <6>;
				port = <9>;
			};

			gpio10: gpio@939400 {
				compatible = "nordic,nrf-gpio";
				reg = <0x939400 0x200>;
				status = "disabled";
				#gpio-cells = <2>;
				gpio-controller;
				ngpios = <8>;
				port = <10>;
			};

			gpio11: gpio@939600 {
				compatible = "nordic,nrf-gpio";
				reg = <0x939600 0x200>;
				status = "disabled";
				#gpio-cells = <2>;
				gpio-controller;
				gpiote-instance = <&gpiote131>;
				ngpios = <8>;
				port = <11>;
			};

			gpio12: gpio@939800 {
				compatible = "nordic,nrf-gpio";
				reg = <0x939800 0x200>;
				status = "disabled";
				#gpio-cells = <2>;
				gpio-controller;
				gpiote-instance = <&gpiote131>;
				ngpios = <3>;
				port = <12>;
			};

			gpio13: gpio@939a00 {
				compatible = "nordic,nrf-gpio";
				reg = <0x939a00 0x200>;
				status = "disabled";
				#gpio-cells = <2>;
				gpio-controller;
				gpiote-instance = <&gpiote131>;
				ngpios = <4>;
				port = <13>;
			};

			dppic131: dppic@981000 {
				compatible = "nordic,nrf-dppic-global";
				reg = <0x981000 0x1000>;
				status = "disabled";
			};

			adc: adc@982000 {
				compatible = "nordic,nrf-saadc";
				reg = <0x982000 0x1000>;
				interrupts = <386 NRF_DEFAULT_IRQ_PRIORITY>;
				status = "disabled";
				#io-channel-cells = <1>;
			};

			comp: comparator@983000 {
				/*
				 * Use compatible "nordic,nrf-comp" to configure as COMP
				 * Use compatible "nordic,nrf-lpcomp" to configure as LPCOMP
				 */
				compatible = "nordic,nrf-comp";
				reg = <0x983000 0x1000>;
				status = "disabled";
				interrupts = <387 NRF_DEFAULT_IRQ_PRIORITY>;
			};

			temp: temperature-sensor@984000 {
				compatible = "nordic,nrf-temp";
				reg = <0x984000 0x1000>;
				interrupts = <388 NRF_DEFAULT_IRQ_PRIORITY>;
				status = "disabled";
			};

			dppic132: dppic@991000 {
				compatible = "nordic,nrf-dppic-global";
				reg = <0x991000 0x1000>;
				status = "disabled";
			};

			qdec130: qdec@994000 {
				compatible = "nordic,nrf-qdec";
				reg = <0x994000 0x1000>;
				status = "disabled";
				interrupts = <404 NRF_DEFAULT_IRQ_PRIORITY>;
			};

			qdec131: qdec@995000 {
				compatible = "nordic,nrf-qdec";
				reg = <0x995000 0x1000>;
				status = "disabled";
				interrupts = <405 NRF_DEFAULT_IRQ_PRIORITY>;
			};

			grtc: grtc@99c000 {
				compatible = "nordic,nrf-grtc";
				reg = <0x99c000 0x1000>;
				status = "disabled";
				cc-num = <16>;
			};

			dppic133: dppic@9a1000 {
				compatible = "nordic,nrf-dppic-global";
				reg = <0x9a1000 0x1000>;
				status = "disabled";
			};

			timer130: timer@9a2000 {
				compatible = "nordic,nrf-timer";
				reg = <0x9a2000 0x1000>;
				status = "disabled";
				cc-num = <6>;
				interrupts = <418 NRF_DEFAULT_IRQ_PRIORITY>;
				max-bit-width = <32>;
				prescaler = <0>;
			};

			timer131: timer@9a3000 {
				compatible = "nordic,nrf-timer";
				reg = <0x9a3000 0x1000>;
				status = "disabled";
				cc-num = <6>;
				interrupts = <419 NRF_DEFAULT_IRQ_PRIORITY>;
				max-bit-width = <32>;
				prescaler = <0>;
			};

			pwm130: pwm@9a4000 {
				compatible = "nordic,nrf-pwm";
				reg = <0x9a4000 0x1000>;
				status = "disabled";
				interrupts = <420 NRF_DEFAULT_IRQ_PRIORITY>;
				#pwm-cells = <3>;
			};

			i2c130: i2c@9a5000 {
				compatible = "nordic,nrf-twim";
				reg = <0x9a5000 0x1000>;
				status = "disabled";
				interrupts = <421 NRF_DEFAULT_IRQ_PRIORITY>;
				easydma-maxcnt-bits = <15>;
				#address-cells = <1>;
				#size-cells = <0>;
				nordic,clockpin-enable = <NRF_FUN_TWIM_SDA>,
							 <NRF_FUN_TWIM_SCL>;
				zephyr,pm-device-runtime-auto;
			};

			spi130: spi@9a5000 {
				compatible = "nordic,nrf-spim";
				reg = <0x9a5000 0x1000>;
				status = "disabled";
				easydma-maxcnt-bits = <15>;
				interrupts = <421 NRF_DEFAULT_IRQ_PRIORITY>;
				max-frequency = <DT_FREQ_M(8)>;
				#address-cells = <1>;
				#size-cells = <0>;
				rx-delay-supported;
				rx-delay = <1>;
				nordic,clockpin-enable = <NRF_FUN_SPIM_MOSI>,
							 <NRF_FUN_SPIM_SCK>,
							 <NRF_FUN_SPIS_MISO>,
							 <NRF_FUN_SPIS_SCK>;
			};

			uart130: uart@9a5000 {
				compatible = "nordic,nrf-uarte";
				reg = <0x9a5000 0x1000>;
				status = "disabled";
				interrupts = <421 NRF_DEFAULT_IRQ_PRIORITY>;
				nordic,clockpin-enable = <NRF_FUN_UART_TX>;
				endtx-stoptx-supported;
				frame-timeout-supported;
			};

			i2c131: i2c@9a6000 {
				compatible = "nordic,nrf-twim";
				reg = <0x9a6000 0x1000>;
				status = "disabled";
				interrupts = <422 NRF_DEFAULT_IRQ_PRIORITY>;
				easydma-maxcnt-bits = <15>;
				#address-cells = <1>;
				#size-cells = <0>;
				nordic,clockpin-enable = <NRF_FUN_TWIM_SDA>,
							 <NRF_FUN_TWIM_SCL>;
				zephyr,pm-device-runtime-auto;
			};

			spi131: spi@9a6000 {
				compatible = "nordic,nrf-spim";
				reg = <0x9a6000 0x1000>;
				status = "disabled";
				easydma-maxcnt-bits = <15>;
				interrupts = <422 NRF_DEFAULT_IRQ_PRIORITY>;
				max-frequency = <DT_FREQ_M(8)>;
				#address-cells = <1>;
				#size-cells = <0>;
				rx-delay-supported;
				rx-delay = <1>;
				nordic,clockpin-enable = <NRF_FUN_SPIM_MOSI>,
							 <NRF_FUN_SPIM_SCK>,
							 <NRF_FUN_SPIS_MISO>,
							 <NRF_FUN_SPIS_SCK>;
			};

			uart131: uart@9a6000 {
				compatible = "nordic,nrf-uarte";
				reg = <0x9a6000 0x1000>;
				status = "disabled";
				interrupts = <422 NRF_DEFAULT_IRQ_PRIORITY>;
				nordic,clockpin-enable = <NRF_FUN_UART_TX>;
				endtx-stoptx-supported;
				frame-timeout-supported;
			};

			dppic134: dppic@9b1000 {
				compatible = "nordic,nrf-dppic-global";
				reg = <0x9b1000 0x1000>;
				status = "disabled";
			};

			timer132: timer@9b2000 {
				compatible = "nordic,nrf-timer";
				reg = <0x9b2000 0x1000>;
				status = "disabled";
				cc-num = <6>;
				interrupts = <434 NRF_DEFAULT_IRQ_PRIORITY>;
				max-bit-width = <32>;
				prescaler = <0>;
			};

			timer133: timer@9b3000 {
				compatible = "nordic,nrf-timer";
				reg = <0x9b3000 0x1000>;
				status = "disabled";
				cc-num = <6>;
				interrupts = <435 NRF_DEFAULT_IRQ_PRIORITY>;
				max-bit-width = <32>;
				prescaler = <0>;
			};

			pwm131: pwm@9b4000 {
				compatible = "nordic,nrf-pwm";
				reg = <0x9b4000 0x1000>;
				status = "disabled";
				interrupts = <436 NRF_DEFAULT_IRQ_PRIORITY>;
				#pwm-cells = <3>;
			};

			i2c132: i2c@9b5000 {
				compatible = "nordic,nrf-twim";
				reg = <0x9b5000 0x1000>;
				status = "disabled";
				interrupts = <437 NRF_DEFAULT_IRQ_PRIORITY>;
				easydma-maxcnt-bits = <15>;
				#address-cells = <1>;
				#size-cells = <0>;
				nordic,clockpin-enable = <NRF_FUN_TWIM_SDA>,
							 <NRF_FUN_TWIM_SCL>;
				zephyr,pm-device-runtime-auto;
			};

			spi132: spi@9b5000 {
				compatible = "nordic,nrf-spim";
				reg = <0x9b5000 0x1000>;
				status = "disabled";
				easydma-maxcnt-bits = <15>;
				interrupts = <437 NRF_DEFAULT_IRQ_PRIORITY>;
				max-frequency = <DT_FREQ_M(8)>;
				#address-cells = <1>;
				#size-cells = <0>;
				rx-delay-supported;
				rx-delay = <1>;
				nordic,clockpin-enable = <NRF_FUN_SPIM_MOSI>,
							 <NRF_FUN_SPIM_SCK>,
							 <NRF_FUN_SPIS_MISO>,
							 <NRF_FUN_SPIS_SCK>;
			};

			uart132: uart@9b5000 {
				compatible = "nordic,nrf-uarte";
				reg = <0x9b5000 0x1000>;
				status = "disabled";
				interrupts = <437 NRF_DEFAULT_IRQ_PRIORITY>;
				nordic,clockpin-enable = <NRF_FUN_UART_TX>;
				endtx-stoptx-supported;
				frame-timeout-supported;
			};

			i2c133: i2c@9b6000 {
				compatible = "nordic,nrf-twim";
				reg = <0x9b6000 0x1000>;
				status = "disabled";
				interrupts = <438 NRF_DEFAULT_IRQ_PRIORITY>;
				easydma-maxcnt-bits = <15>;
				#address-cells = <1>;
				#size-cells = <0>;
				nordic,clockpin-enable = <NRF_FUN_TWIM_SDA>,
							 <NRF_FUN_TWIM_SCL>;
				zephyr,pm-device-runtime-auto;
			};

			spi133: spi@9b6000 {
				compatible = "nordic,nrf-spim";
				reg = <0x9b6000 0x1000>;
				status = "disabled";
				easydma-maxcnt-bits = <15>;
				interrupts = <438 NRF_DEFAULT_IRQ_PRIORITY>;
				max-frequency = <DT_FREQ_M(8)>;
				#address-cells = <1>;
				#size-cells = <0>;
				rx-delay-supported;
				rx-delay = <1>;
				nordic,clockpin-enable = <NRF_FUN_SPIM_MOSI>,
							 <NRF_FUN_SPIM_SCK>,
							 <NRF_FUN_SPIS_MISO>,
							 <NRF_FUN_SPIS_SCK>;
			};

			uart133: uart@9b6000 {
				compatible = "nordic,nrf-uarte";
				reg = <0x9b6000 0x1000>;
				status = "disabled";
				interrupts = <438 NRF_DEFAULT_IRQ_PRIORITY>;
				nordic,clockpin-enable = <NRF_FUN_UART_TX>;
				endtx-stoptx-supported;
				frame-timeout-supported;
			};

			dppic135: dppic@9c1000 {
				compatible = "nordic,nrf-dppic-global";
				reg = <0x9c1000 0x1000>;
				status = "disabled";
			};

			timer134: timer@9c2000 {
				compatible = "nordic,nrf-timer";
				reg = <0x9c2000 0x1000>;
				status = "disabled";
				cc-num = <6>;
				interrupts = <450 NRF_DEFAULT_IRQ_PRIORITY>;
				max-bit-width = <32>;
				prescaler = <0>;
			};

			timer135: timer@9c3000 {
				compatible = "nordic,nrf-timer";
				reg = <0x9c3000 0x1000>;
				status = "disabled";
				cc-num = <6>;
				interrupts = <451 NRF_DEFAULT_IRQ_PRIORITY>;
				max-bit-width = <32>;
				prescaler = <0>;
			};

			pwm132: pwm@9c4000 {
				compatible = "nordic,nrf-pwm";
				reg = <0x9c4000 0x1000>;
				status = "disabled";
				interrupts = <452 NRF_DEFAULT_IRQ_PRIORITY>;
				#pwm-cells = <3>;
			};

			i2c134: i2c@9c5000 {
				compatible = "nordic,nrf-twim";
				reg = <0x9c5000 0x1000>;
				status = "disabled";
				interrupts = <453 NRF_DEFAULT_IRQ_PRIORITY>;
				easydma-maxcnt-bits = <15>;
				#address-cells = <1>;
				#size-cells = <0>;
				nordic,clockpin-enable = <NRF_FUN_TWIM_SDA>,
							 <NRF_FUN_TWIM_SCL>;
				zephyr,pm-device-runtime-auto;
			};

			spi134: spi@9c5000 {
				compatible = "nordic,nrf-spim";
				reg = <0x9c5000 0x1000>;
				status = "disabled";
				easydma-maxcnt-bits = <15>;
				interrupts = <453 NRF_DEFAULT_IRQ_PRIORITY>;
				max-frequency = <DT_FREQ_M(8)>;
				#address-cells = <1>;
				#size-cells = <0>;
				rx-delay-supported;
				rx-delay = <1>;
				nordic,clockpin-enable = <NRF_FUN_SPIM_MOSI>,
							 <NRF_FUN_SPIM_SCK>,
							 <NRF_FUN_SPIS_MISO>,
							 <NRF_FUN_SPIS_SCK>;
			};

			uart134: uart@9c5000 {
				compatible = "nordic,nrf-uarte";
				reg = <0x9c5000 0x1000>;
				status = "disabled";
				interrupts = <453 NRF_DEFAULT_IRQ_PRIORITY>;
				nordic,clockpin-enable = <NRF_FUN_UART_TX>;
				endtx-stoptx-supported;
				frame-timeout-supported;
			};

			i2c135: i2c@9c6000 {
				compatible = "nordic,nrf-twim";
				reg = <0x9c6000 0x1000>;
				status = "disabled";
				interrupts = <454 NRF_DEFAULT_IRQ_PRIORITY>;
				easydma-maxcnt-bits = <15>;
				#address-cells = <1>;
				#size-cells = <0>;
				nordic,clockpin-enable = <NRF_FUN_TWIM_SDA>,
							 <NRF_FUN_TWIM_SCL>;
				zephyr,pm-device-runtime-auto;
			};

			spi135: spi@9c6000 {
				compatible = "nordic,nrf-spim";
				reg = <0x9c6000 0x1000>;
				status = "disabled";
				easydma-maxcnt-bits = <15>;
				interrupts = <454 NRF_DEFAULT_IRQ_PRIORITY>;
				max-frequency = <DT_FREQ_M(8)>;
				#address-cells = <1>;
				#size-cells = <0>;
				rx-delay-supported;
				rx-delay = <1>;
				nordic,clockpin-enable = <NRF_FUN_SPIM_MOSI>,
							 <NRF_FUN_SPIM_SCK>,
							 <NRF_FUN_SPIS_MISO>,
							 <NRF_FUN_SPIS_SCK>;
			};

			uart135: uart@9c6000 {
				compatible = "nordic,nrf-uarte";
				reg = <0x9c6000 0x1000>;
				status = "disabled";
				interrupts = <454 NRF_DEFAULT_IRQ_PRIORITY>;
				nordic,clockpin-enable = <NRF_FUN_UART_TX>;
				endtx-stoptx-supported;
				frame-timeout-supported;
			};

			dppic136: dppic@9d1000 {
				compatible = "nordic,nrf-dppic-global";
				reg = <0x9d1000 0x1000>;
				status = "disabled";
			};

			timer136: timer@9d2000 {
				compatible = "nordic,nrf-timer";
				reg = <0x9d2000 0x1000>;
				status = "disabled";
				cc-num = <6>;
				interrupts = <466 NRF_DEFAULT_IRQ_PRIORITY>;
				max-bit-width = <32>;
				prescaler = <0>;
			};

			timer137: timer@9d3000 {
				compatible = "nordic,nrf-timer";
				reg = <0x9d3000 0x1000>;
				status = "disabled";
				cc-num = <6>;
				interrupts = <467 NRF_DEFAULT_IRQ_PRIORITY>;
				max-bit-width = <32>;
				prescaler = <0>;
			};

			pwm133: pwm@9d4000 {
				compatible = "nordic,nrf-pwm";
				reg = <0x9d4000 0x1000>;
				status = "disabled";
				interrupts = <468 NRF_DEFAULT_IRQ_PRIORITY>;
				#pwm-cells = <3>;
			};

			i2c136: i2c@9d5000 {
				compatible = "nordic,nrf-twim";
				reg = <0x9d5000 0x1000>;
				status = "disabled";
				interrupts = <469 NRF_DEFAULT_IRQ_PRIORITY>;
				easydma-maxcnt-bits = <15>;
				#address-cells = <1>;
				#size-cells = <0>;
				nordic,clockpin-enable = <NRF_FUN_TWIM_SDA>,
							 <NRF_FUN_TWIM_SCL>;
				zephyr,pm-device-runtime-auto;
			};

			spi136: spi@9d5000 {
				compatible = "nordic,nrf-spim";
				reg = <0x9d5000 0x1000>;
				status = "disabled";
				easydma-maxcnt-bits = <15>;
				interrupts = <469 NRF_DEFAULT_IRQ_PRIORITY>;
				max-frequency = <DT_FREQ_M(8)>;
				#address-cells = <1>;
				#size-cells = <0>;
				rx-delay-supported;
				rx-delay = <1>;
				nordic,clockpin-enable = <NRF_FUN_SPIM_MOSI>,
							 <NRF_FUN_SPIM_SCK>,
							 <NRF_FUN_SPIS_MISO>,
							 <NRF_FUN_SPIS_SCK>;
			};

			uart136: uart@9d5000 {
				compatible = "nordic,nrf-uarte";
				reg = <0x9d5000 0x1000>;
				status = "disabled";
				interrupts = <469 NRF_DEFAULT_IRQ_PRIORITY>;
				nordic,clockpin-enable = <NRF_FUN_UART_TX>;
				endtx-stoptx-supported;
				frame-timeout-supported;
			};

			i2c137: i2c@9d6000 {
				compatible = "nordic,nrf-twim";
				reg = <0x9d6000 0x1000>;
				status = "disabled";
				interrupts = <470 NRF_DEFAULT_IRQ_PRIORITY>;
				easydma-maxcnt-bits = <15>;
				#address-cells = <1>;
				#size-cells = <0>;
				nordic,clockpin-enable = <NRF_FUN_TWIM_SDA>,
							 <NRF_FUN_TWIM_SCL>;
				zephyr,pm-device-runtime-auto;
			};

			spi137: spi@9d6000 {
				compatible = "nordic,nrf-spim";
				reg = <0x9d6000 0x1000>;
				status = "disabled";
				easydma-maxcnt-bits = <15>;
				interrupts = <470 NRF_DEFAULT_IRQ_PRIORITY>;
				max-frequency = <DT_FREQ_M(8)>;
				#address-cells = <1>;
				#size-cells = <0>;
				rx-delay-supported;
				rx-delay = <1>;
				nordic,clockpin-enable = <NRF_FUN_SPIM_MOSI>,
							 <NRF_FUN_SPIM_SCK>,
							 <NRF_FUN_SPIS_MISO>,
							 <NRF_FUN_SPIS_SCK>;
			};

			uart137: uart@9d6000 {
				compatible = "nordic,nrf-uarte";
				reg = <0x9d6000 0x1000>;
				status = "disabled";
				interrupts = <470 NRF_DEFAULT_IRQ_PRIORITY>;
				nordic,clockpin-enable = <NRF_FUN_UART_TX>;
				endtx-stoptx-supported;
				frame-timeout-supported;
			};
		};
	};

	cpuapp_ppb: cpuapp-ppb-bus {
		#address-cells = <1>;
		#size-cells = <1>;

		cpuapp_systick: timer@e000e010 {
			compatible = "arm,armv8m-systick";
			reg = <0xe000e010 0x10>;
			status = "disabled";
		};

		cpuapp_nvic: interrupt-controller@e000e100 {
			compatible = "arm,v8m-nvic";
			reg = <0xe000e100 0xc00>;
			arm,num-irq-priority-bits = <3>;
			#interrupt-cells = <2>;
			interrupt-controller;
			#address-cells = <1>;
		};
	};

	cpurad_ppb: cpurad-ppb-bus {
		#address-cells = <1>;
		#size-cells = <1>;

		cpurad_systick: timer@e000e010 {
			compatible = "arm,armv8m-systick";
			reg = <0xe000e010 0x10>;
			status = "disabled";
		};

		cpurad_nvic: interrupt-controller@e000e100 {
			compatible = "arm,v8m-nvic";
			reg = <0xe000e100 0xc00>;
			arm,num-irq-priority-bits = <3>;
			#interrupt-cells = <2>;
			interrupt-controller;
			#address-cells = <1>;
		};
	};

	cpuppr_private: cpuppr-private-bus {
		#address-cells = <1>;
		#size-cells = <1>;

		cpuppr_clic: interrupt-controller@5f909000 {
			compatible = "nordic,nrf-clic";
			reg = <0x5f909000 0x3000>;
			status = "disabled";
			#interrupt-cells = <2>;
			interrupt-controller;
			#address-cells = <1>;
		};
	};

	temp_nrfs: temp {
		compatible = "nordic,nrf-temp-nrfs";
		status = "disabled";
	};
};