/* * Copyright (c) 2017 Piotr Mienkowski * Copyright (c) 2017 Justin Watson * * SPDX-License-Identifier: Apache-2.0 */ /dts-v1/; #include / { model = "Atmel SAM E70 Xplained board"; compatible = "atmel,sam_e70_xplained", "atmel,same70q21", "atmel,same70"; aliases { i2c-0 = &i2c0; i2c-1 = &i2c1; i2c-2 = &i2c2; led0 = &green_led; sw0 = &sw0_user_button; wdog = &wdog; }; chosen { zephyr,console = &usart1; zephyr,shell-uart = &usart1; zephyr,sram = &sram0; zephyr,flash = &flash0; }; leds { compatible = "gpio-leds"; green_led: led_0 { gpios = <&portc 8 0>; label = "User LED"; }; }; gpio_keys { compatible = "gpio-keys"; /* The switch is labeled SW300 in the schematic, and labeled * SW0 on the board, and labeld SW1 User Button on docs */ sw0_user_button: button_1 { label = "User Button"; gpios = <&porta 11 (GPIO_PUD_PULL_UP | GPIO_INT_ACTIVE_LOW)>; }; }; }; &adc0 { status = "ok"; }; &adc1 { status = "ok"; }; &i2c0 { status = "ok"; }; &i2c2 { status = "ok"; }; &spi0 { status = "ok"; }; &usart1 { current-speed = <115200>; status = "ok"; }; &wdog { status = "ok"; }; &usbhs { status = "ok"; }; &flash0 { /* * If chosen's zephyr,code-partition * is unset, the image will be linked * into the entire flash device. If * it points to an individual * partition, the code will be linked * to, and restricted to that * partition. */ partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; /* * The first half of sector 0 (64 kbytes) * is reserved for the bootloader */ boot_partition: partition@0 { label = "mcuboot"; reg = <0x0 0x00010000>; read-only; }; /* From sector 1 to sector 7 (included): slot0 (896 kbytes) */ slot0_partition: partition@20000 { label = "image-0"; reg = <0x0020000 0x000e0000>; }; /* From sector 8 to sector 14 (included): slot1 (896 kbytes) */ slot1_partition: partition@100000 { label = "image-1"; reg = <0x00100000 0x000e0000>; }; /* Sector 15: scratch (128 kbytes) */ scratch_partition: partition@1e0000 { label = "image-scratch"; reg = <0x001e0000 0x00020000>; }; }; };