# Kconfig.tmp007 - TMP007 infrared thermopile sensor configuration options

#
# Copyright (c) 2016 Intel Corporation
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
#     http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#

menuconfig TMP007
	bool
	prompt "TMP007 Infrared Thermopile Sensor"
	depends on SENSOR && I2C
	default n
	help
	  Enable driver for TMP007 infrared thermopile sensors.

config TMP007_NAME
	string
	prompt "Driver name"
	default "TMP007"
	depends on TMP007
	help
	  Device name with which the TMP007 sensor is identified.

config TMP007_INIT_PRIORITY
	int
	prompt "Init priority"
	depends on TMP007
	default 70
	help
	  Device driver initialization priority.

choice
	prompt "I2C address"
	depends on TMP007
	default TMP007_I2C_ADDR_0
	help
	  I2C address of the TMP007 sensor.

config TMP007_I2C_ADDR_0
	bool
	prompt "0x40"
	help
	  A0 connected GND and A1 connected to GND.

config TMP007_I2C_ADDR_1
	bool
	prompt "0x41"
	help
	  A0 connected VDD and A1 connected to GND.

config TMP007_I2C_ADDR_2
	bool
	prompt "0x42"
	help
	  A0 connected SDA and A1 connected to GND.

config TMP007_I2C_ADDR_3
	bool
	prompt "0x43"
	help
	  A0 connected SCL and A1 connected to GND.

config TMP007_I2C_ADDR_4
	bool
	prompt "0x44"
	help
	  A0 connected GND and A1 connected to VDD.

config TMP007_I2C_ADDR_5
	bool
	prompt "0x45"
	help
	  A0 connected VDD and A1 connected to VDD.

config TMP007_I2C_ADDR_6
	bool
	prompt "0x46"
	help
	  A0 connected SDA and A1 connected to VDD.

config TMP007_I2C_ADDR_7
	bool
	prompt "0x47"
	help
	  A0 connected SCL and A1 connected to VDD.

endchoice

config TMP007_I2C_MASTER_DEV_NAME
	string
	prompt "I2C master where TMP007 is connected"
	depends on TMP007
	default "I2C0"
	help
	  Specify the device name of the I2C master device to which the
	  TMP007 chip is connected.

choice
	prompt "Trigger mode"
	depends on TMP007
	default TMP007_TRIGGER_NONE
	help
	  Specify the type of triggering to be used by the driver.

config TMP007_TRIGGER_NONE
	bool
	prompt "No trigger"

config TMP007_TRIGGER_GLOBAL_FIBER
	bool
	prompt "Use global fiber"
	depends on GPIO
	select TMP007_TRIGGER
	select SENSOR_DELAYED_WORK

config TMP007_TRIGGER_OWN_FIBER
	bool
	prompt "Use own fiber"
	depends on GPIO
	select TMP007_TRIGGER

endchoice

config TMP007_TRIGGER
	bool
	depends on TMP007

config TMP007_GPIO_DEV_NAME
	string
	prompt "GPIO device"
	default "GPIO_0"
	depends on TMP007 && TMP007_TRIGGER
	help
	  The device name of the GPIO device to which the TMP007 interrupt
	  (alert) pin is connected.

config TMP007_GPIO_PIN_NUM
	int
	prompt "Interrupt GPIO pin number"
	default 0
	depends on TMP007 && TMP007_TRIGGER
	help
	  The number of the GPIO pin on which the interrupt signal from the
	  TMP007 chip will be received.

config TMP007_FIBER_PRIORITY
	int
	prompt "Fiber priority"
	depends on TMP007 && TMP007_TRIGGER_OWN_FIBER
	default 10
	help
	  Priority of fiber used by the driver to handle interrupts.

config TMP007_FIBER_STACK_SIZE
	int
	prompt "Fiber stack size"
	depends on TMP007 && TMP007_TRIGGER_OWN_FIBER
	default 1024
	help
	  Stack size of fiber used by the driver to handle interrupts.