/* * Copyright (c) 2013-2014 Wind River Systems, Inc. * * SPDX-License-Identifier: Apache-2.0 */ /** * @file * @brief ARM CORTEX-M3 wrapper for ISRs with parameter * * Wrapper installed in vector table for handling dynamic interrupts that accept * a parameter. */ #include #include #include #include #include #include _ASM_FILE_PROLOGUE GDATA(_sw_isr_table) GTEXT(_isr_wrapper) GTEXT(_IntExit) /** * * @brief Wrapper around ISRs when inserted in software ISR table * * When inserted in the vector table, _isr_wrapper() demuxes the ISR table using * the running interrupt number as the index, and invokes the registered ISR * with its correspoding argument. When returning from the ISR, it determines * if a context switch needs to happen (see documentation for __pendsv()) and * pends the PendSV exception if so: the latter will perform the context switch * itself. * * @return N/A */ SECTION_FUNC(TEXT, _isr_wrapper) push {lr} /* lr is now the first item on the stack */ #ifdef CONFIG_KERNEL_EVENT_LOGGER_INTERRUPT bl _sys_k_event_logger_interrupt #endif #ifdef CONFIG_KERNEL_EVENT_LOGGER_SLEEP bl _sys_k_event_logger_exit_sleep #endif #ifdef CONFIG_SYS_POWER_MANAGEMENT /* * All interrupts are disabled when handling idle wakeup. For tickless * idle, this ensures that the calculation and programming of the device * for the next timer deadline is not interrupted. For non-tickless idle, * this ensures that the clearing of the kernel idle state is not * interrupted. In each case, _sys_power_save_idle_exit is called with * interrupts disabled. */ cpsid i /* PRIMASK = 1 */ /* is this a wakeup from idle ? */ ldr r2, =_kernel /* requested idle duration, in ticks */ ldr r0, [r2, #_kernel_offset_to_idle] cmp r0, #0 #if defined(CONFIG_ARMV6_M) beq _idle_state_cleared movs.n r1, #0 /* clear kernel idle state */ str r1, [r2, #_kernel_offset_to_idle] blx _sys_power_save_idle_exit _idle_state_cleared: #elif defined(CONFIG_ARMV7_M) ittt ne movne r1, #0 /* clear kernel idle state */ strne r1, [r2, #_kernel_offset_to_idle] blxne _sys_power_save_idle_exit #else #error Unknown ARM architecture #endif /* CONFIG_ARMV6_M */ cpsie i /* re-enable interrupts (PRIMASK = 0) */ #endif mrs r0, IPSR /* get exception number */ #if defined(CONFIG_ARMV6_M) ldr r1, =16 subs r0, r1 /* get IRQ number */ lsls r0, #3 /* table is 8-byte wide */ #elif defined(CONFIG_ARMV7_M) sub r0, r0, #16 /* get IRQ number */ lsl r0, r0, #3 /* table is 8-byte wide */ #else #error Unknown ARM architecture #endif /* CONFIG_ARMV6_M */ ldr r1, =_sw_isr_table add r1, r1, r0 /* table entry: ISRs must have their MSB set to stay * in thumb mode */ ldm r1!,{r0,r3} /* arg in r0, ISR in r3 */ blx r3 /* call ISR */ #if defined(CONFIG_ARMV6_M) pop {r3} mov lr, r3 #elif defined(CONFIG_ARMV7_M) pop {lr} #else #error Unknown ARM architecture #endif /* CONFIG_ARMV6_M */ /* exception return is done in _IntExit() */ b _IntExit