/* * Copyright (c) 2020 Piotr Mienkowski * * SPDX-License-Identifier: Apache-2.0 */ #include #include "efr32_radio-pinctrl.dtsi" / { chosen { zephyr,console = &usart0; zephyr,shell-uart = &usart0; zephyr,sram = &sram0; zephyr,flash = &flash0; zephyr,code-partition = &slot0_partition; }; /* These aliases are provided for compatibility with samples */ aliases { led0 = &led0; led1 = &led1; sw0 = &button0; sw1 = &button1; watchdog0 = &wdog0; spi-flash0 = &mx25r80; }; leds { compatible = "gpio-leds"; led0: led_0 { gpios = <&gpiof 4 0>; label = "LED 0"; }; led1: led_1 { gpios = <&gpiof 5 0>; label = "LED 1"; }; }; buttons { compatible = "gpio-keys"; button0: button_0 { /* gpio flags need validation */ gpios = <&gpiof 6 GPIO_ACTIVE_LOW>; label = "User Push Button 0"; zephyr,code = ; }; button1: button_1 { /* gpio flags need validation */ gpios = <&gpiof 7 GPIO_ACTIVE_LOW>; label = "User Push Button 1"; zephyr,code = ; }; }; }; &usart0 { current-speed = <115200>; pinctrl-0 = <&usart0_default>; pinctrl-names = "default"; status = "okay"; }; &usart1 { compatible = "silabs,gecko-spi-usart"; #address-cells = <1>; #size-cells = <0>; location-rx = ; location-tx = ; location-clk = ; cs-gpios = <&gpioa 4 GPIO_ACTIVE_LOW>; status = "okay"; mx25r80: mx25r8035f@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <33000000>; size = <0x800000>; jedec-id = [c2 28 14]; }; }; &rtcc0 { prescaler = <1>; status = "okay"; }; &gpio { location-swo = <0>; status = "okay"; }; &gpioa { status = "okay"; board-controller-enable { gpio-hog; gpios = <5 GPIO_ACTIVE_HIGH>; output-high; }; }; &gpiob { status = "okay"; }; &gpioc { status = "okay"; }; &gpiod { status = "okay"; }; &gpiof { status = "okay"; }; &wdog0 { status = "okay"; };