/*
 * Copyright (c) 2024 Renesas Electronics Corporation
 * SPDX-License-Identifier: Apache-2.0
 */

/dts-v1/;

#include <renesas/ra/ra8/r7fa8m1ahecbd.dtsi>
#include <dt-bindings/gpio/gpio.h>
#include <zephyr/dt-bindings/adc/adc.h>
#include "ek_ra8m1-pinctrl.dtsi"

/ {
	model = "Renesas EK-RA8M1";
	compatible = "renesas,ra8m1", "renesas,ra8";

	chosen {
		zephyr,sram = &sram0;
		zephyr,flash-controller = &flash1;
		zephyr,flash = &flash0;
		zephyr,console = &uart9;
		zephyr,shell-uart = &uart9;
		zephyr,entropy = &trng;
		zephyr,canbus = &canfd0;
	};

	leds {
		compatible = "gpio-leds";
		led1: led1 {
			gpios = <&ioport6 0 GPIO_ACTIVE_HIGH>;
			label = "LED1";
		};
		led2: led2 {
			gpios = <&ioport4 14 GPIO_ACTIVE_HIGH>;
			label = "LED2";
		};
		led3: led3 {
			gpios = <&ioport1 7 GPIO_ACTIVE_HIGH>;
			label = "LED3";
		};
	};

	mikrobus_header: mikrobus-connector {
		compatible = "mikro-bus";
		#gpio-cells = <2>;
		gpio-map-mask = <0xffffffff 0xffffffc0>;
		gpio-map-pass-thru = <0 0x3f>;
		gpio-map =	<0 0 &ioport0 4 0>,	/* AN  */
				<1 0 &ioport5 2 0>,	/* RST */
				<2 0 &ioport4 13 0>,	/* CS   */
				<3 0 &ioport4 12 0>,	/* SCK  */
				<4 0 &ioport4 10 0>,	/* MISO */
				<5 0 &ioport4 11 0>,	/* MOSI */
							/* +3.3V */
							/* GND */
				<6 0 &ioport9 7 0>,	/* PWM  */
				<7 0 &ioport0 10 0>,	/* INT  */
				<8 0 &ioport3 9 0>,	/* RX   */
				<9 0 &ioport3 10 0>,	/* TX   */
				<10 0 &ioport4 0 0>,	/* SCL  */
				<11 0 &ioport4 1 0>;	/* SDA  */
							/* +5V */
							/* GND */
	};

	pmod1_header: pmod-connector-1 {
		compatible = "digilent,pmod";
		#gpio-cells = <2>;
		gpio-map-mask = <0xffffffff 0xffffffc0>;
		gpio-map-pass-thru = <0 0x3f>;
		gpio-map = <0 0 &ioport6 12 0>,	/* IO1 */
			   <1 0 &ioport6 9 0>,	/* IO2 */
			   <2 0 &ioport6 10 0>,	/* IO3 */
			   <3 0 &ioport6 11 0>,	/* IO4 */
			   <4 0 &ioport0 6 0>,	/* IO5 */
			   <5 0 &ioporta 8 0>,	/* IO6 */
			   <6 0 &ioport6 14 0>,	/* IO7 */
			   <7 0 &ioport6 15 0>;	/* IO8 */
	};

	pmod2_header: pmod-connector-2 {
		compatible = "digilent,pmod";
		#gpio-cells = <2>;
		gpio-map-mask = <0xffffffff 0xffffffc0>;
		gpio-map-pass-thru = <0 0x3f>;
		gpio-map = <0 0 &ioporta 5 0>,	/* IO1 */
			   <1 0 &ioporta 3 0>,	/* IO2 */
			   <2 0 &ioporta 2 0>,	/* IO3 */
			   <3 0 &ioporta 4 0>,	/* IO4 */
			   <4 0 &ioport5 8 0>,	/* IO5 */
			   <5 0 &ioport8 9 0>,	/* IO6 */
			   <6 0 &ioport8 10 0>,	/* IO7 */
			   <7 0 &ioport8 11 0>;	/* IO8 */
	};

	aliases {
		led0 = &led1;
	};

	transceiver0: can-phy0 {
		compatible = "nxp,tja1040t", "can-transceiver-gpio";
		standby-gpios = <&ioport2 7 GPIO_ACTIVE_HIGH>;
		max-bitrate = <5000000>;
		#phy-cells = <0>;
	};
};

&xtal {
	clock-frequency = <DT_FREQ_M(20)>;
	mosel = <0>;
	#clock-cells = <0>;
	status = "okay";
};

&subclk {
	status = "okay";
};

&pll {
	status = "okay";
	pllp {
		status = "okay";
	};

	pllq {
		status = "okay";
	};

	pllr {
		status = "okay";
	};
};


&sciclk {
	clocks = <&pllp>;
	div = <4>;
	status = "okay";
};

&canfdclk {
	clocks = <&pll>;
	div = <5>;
	status = "okay";
};

&ioport0 {
	status = "okay";
};

&ioport1 {
	status = "okay";
};

&ioport2 {
	status = "okay";
};

&ioport3 {
	status = "okay";
};

&ioport4 {
	status = "okay";
};

&ioport5 {
	status = "okay";
};

&ioport6 {
	status = "okay";
};

&ioport8 {
	status = "okay";
};

&ioport9 {
	status = "okay";
};

&ioporta {
	status = "okay";
};

&sci0 {
	pinctrl-0 = <&sci0_default>;
	pinctrl-names = "default";
	status = "okay";
	uart0: uart {
		current-speed = <115200>;
		status = "okay";
	};
};

&sci2 {
	pinctrl-0 = <&sci2_default>;
	pinctrl-names = "default";
	status = "okay";
	uart2: uart {
		current-speed = <115200>;
		status = "okay";
	};
};

&sci3 {
	pinctrl-0 = <&sci3_default>;
	pinctrl-names = "default";
	status = "okay";
	uart3: uart {
		current-speed = <115200>;
		status = "okay";
	};
};

&sci9 {
	pinctrl-0 = <&sci9_default>;
	pinctrl-names = "default";
	status = "okay";
	uart9: uart {
		current-speed = <115200>;
		status = "okay";
	};
};

mikrobus_serial: &uart3 {};

&iic1 {
	#address-cells = <1>;
	#size-cells = <0>;
	clock-frequency = <DT_FREQ_M(1)>;
	pinctrl-0 = <&iic1_default>;
	pinctrl-names = "default";
};

&adc0 {
	status = "okay";
	pinctrl-0 = <&adc0_default>;
	pinctrl-names = "default";
};

&trng {
	status = "okay";
};

&spi1 {
	pinctrl-0 = <&spi1_default>;
};

&pwm7 {
	pinctrl-0 = <&pwm7_default>;
	interrupts = <40 1>, <41 1>;
	interrupt-names = "gtioca", "overflow";
	pinctrl-names = "default";
	status = "okay";
};

&flash1 {
	partitions {
		compatible = "fixed-partitions";
		#address-cells = <1>;
		#size-cells = <1>;

		storage_partition: partition@0 {
			label = "storage";
			reg = <0X0 DT_SIZE_K(12)>;
		};
	};
};

&canfd_global {
	status = "okay";
	canfd0 {
		pinctrl-0 = <&canfd0_default>;
		pinctrl-names = "default";
		phys = <&transceiver0>;
		rx-max-filters = <16>;
		status = "okay";
	};
};

pmod1_serial: &uart0 {};
pmod2_serial: &uart2 {};

pmod_serial: &pmod1_serial {};
pmod_header: &pmod1_header {};