# Nordic Semiconductor nRF5 802.15.4 configuration options # Copyright (c) 2017 Nordic Semiconductor ASA # SPDX-License-Identifier: Apache-2.0 menuconfig IEEE802154_NRF5 bool "nRF52 series IEEE 802.15.4 Driver" depends on NETWORKING select NRF_802154_RADIO_DRIVER if HAS_HW_NRF_RADIO_IEEE802154 select NRF_802154_SER_HOST if !HAS_HW_NRF_RADIO_IEEE802154 if IEEE802154_NRF5 config IEEE802154_NRF5_DRV_NAME string "nRF52 IEEE 802.15.4 Driver's name" default "IEEE802154_nrf5" help This option sets the driver name config IEEE802154_NRF5_RX_STACK_SIZE int "Driver's internal RX thread stack size" default 800 help This option sets the driver's stack size for its internal RX thread. The default value should be sufficient, but in case it proves to be a too little one, this option makes it easy to play with the size. config IEEE802154_NRF5_INIT_PRIO int "nRF52 IEEE 802.15.4 initialization priority" default 80 help Set the initialization priority number. Do not mess with it unless you know what you are doing. config IEEE802154_NRF5_EXT_IRQ_MGMT bool help The driver may manage radio IRQs by itself, or use an external radio IRQ provider. When radio IRQs are managed by an external provider, the driver shall not configure radio IRQs. Enable this option when external radio IRQ provider is enabled in the system. One example of external radio IRQ provider could be a radio arbiter used in dynamic multiprotocol applications. config IEEE802154_NRF5_UICR_EUI64_ENABLE bool "Enables using EUI64 value stored in UICR registers" depends on !IEEE802154_VENDOR_OUI_ENABLE depends on SOC_SERIES_NRF52X || SOC_SERIES_NRF53X help This option enables setting custom vendor EUI64 value stored in User information configuration registers (UICR). Notice that this disables the default setting of EUI64 value from Factory information configuration registers (FICR). if IEEE802154_NRF5_UICR_EUI64_ENABLE config IEEE802154_NRF5_UICR_EUI64_REG int "UICR base register for the EUI64 value" range 0 30 if SOC_SERIES_NRF52X range 0 190 if SOC_SERIES_NRF53X default 0 help Base of the two consecutive registers from the UICR customer section in which custom EUI64 is stored. endif # IEEE802154_NRF5_UICR_EUI64_ENABLE endif