/*
 * Copyright (c) 2021 Linaro Limited
 *
 * SPDX-License-Identifier: Apache-2.0
 */

/**
 * @file
 * @brief System/hardware module for STM32U5 processor
 */

#include <zephyr/device.h>
#include <zephyr/init.h>
#include <stm32_ll_bus.h>
#include <stm32_ll_pwr.h>
#include <stm32_ll_icache.h>
#include <zephyr/logging/log.h>

#include <cmsis_core.h>

#define LOG_LEVEL CONFIG_SOC_LOG_LEVEL
LOG_MODULE_REGISTER(soc);

/**
 * @brief Perform basic hardware initialization at boot.
 *
 * This needs to be run from the very beginning.
 * So the init priority has to be 0 (zero).
 *
 * @return 0
 */
static int stm32u5_init(void)
{
	/* Enable instruction cache in 1-way (direct mapped cache) */
	LL_ICACHE_SetMode(LL_ICACHE_1WAY);
	LL_ICACHE_Enable();

	/* Update CMSIS SystemCoreClock variable (HCLK) */
	/* At reset, system core clock is set to 4 MHz from MSIS */
	SystemCoreClock = 4000000;

	/* Enable PWR */
	LL_AHB3_GRP1_EnableClock(LL_AHB3_GRP1_PERIPH_PWR);

	if (IS_ENABLED(CONFIG_DT_HAS_ST_STM32_UCPD_ENABLED) ||
		!IS_ENABLED(CONFIG_USB_DEVICE_DRIVER)) {
		/* Disable USB Type-C dead battery pull-down behavior */
		LL_PWR_DisableUCPDDeadBattery();
	}

	/* Power Configuration */
#if defined(CONFIG_POWER_SUPPLY_DIRECT_SMPS)
	LL_PWR_SetRegulatorSupply(LL_PWR_SMPS_SUPPLY);
#elif defined(CONFIG_POWER_SUPPLY_LDO)
	LL_PWR_SetRegulatorSupply(LL_PWR_LDO_SUPPLY);
#else
#error "Unsupported power configuration"
#endif

	return 0;
}

SYS_INIT(stm32u5_init, PRE_KERNEL_1, 0);