# SPDX-License-Identifier: Apache-2.0

CONFIG_ARM=y
CONFIG_BOARD_STM32F723E_DISCO=y
CONFIG_SOC_SERIES_STM32F7X=y
CONFIG_SOC_STM32F723XE=y
CONFIG_CORTEX_M_SYSTICK=y
# 216MHz system clock
CONFIG_SYS_CLOCK_HW_CYCLES_PER_SEC=216000000
CONFIG_SYS_CLOCK_TICKS_PER_SEC=1000

CONFIG_SERIAL=y

# console
CONFIG_CONSOLE=y
CONFIG_UART_CONSOLE=y

# enable pinmux
CONFIG_PINMUX=y

# enable GPIO
CONFIG_GPIO=y

# clock configuration
CONFIG_CLOCK_CONTROL=y

# Clock configuration for Cube Clock control driver
CONFIG_CLOCK_STM32_HSE_CLOCK=25000000
CONFIG_CLOCK_STM32_SYSCLK_SRC_PLL=y
# use HSE as PLL input
CONFIG_CLOCK_STM32_PLL_SRC_HSE=y
# produce 216MHz clock at PLL output
CONFIG_CLOCK_STM32_PLL_M_DIVISOR=25
CONFIG_CLOCK_STM32_PLL_N_MULTIPLIER=432
CONFIG_CLOCK_STM32_PLL_P_DIVISOR=2
CONFIG_CLOCK_STM32_PLL_Q_DIVISOR=9
CONFIG_CLOCK_STM32_AHB_PRESCALER=1
CONFIG_CLOCK_STM32_APB1_PRESCALER=4
CONFIG_CLOCK_STM32_APB2_PRESCALER=2