/* * Copyright (c) 2024 Erik Andersson * * SPDX-License-Identifier: Apache-2.0 */ #ifndef ZEPHYR_DRIVERS_DISPLAY_DISPLAY_NT35510_H_ #define ZEPHYR_DRIVERS_DISPLAY_DISPLAY_NT35510_H_ /** * @name Controller registers * @{ */ /* NT35510 ID */ #define NT35510_ID 0x80U #define NT35510_CMD_NOP 0x00 /* NOP */ #define NT35510_CMD_SWRESET 0x01 /* SW reset */ #define NT35510_CMD_RDDID 0x04 /* Read display ID */ #define NT35510_CMD_RDNUMED 0x05 /* Read number of errors on DSI */ #define NT35510_CMD_RDDPM 0x0A /* Read display power mode */ #define NT35510_CMD_RDDMADCTL 0x0B /* Read display MADCTL */ #define NT35510_CMD_RDDCOLMOD 0x0C /* Read display pixel format */ #define NT35510_CMD_RDDIM 0x0D /* Read display image mode */ #define NT35510_CMD_RDDSM 0x0E /* Read display signal mode */ #define NT35510_CMD_RDDSDR 0x0F /* Read display self-diagnostics result */ #define NT35510_CMD_SLPIN 0x10 /* Sleep in */ #define NT35510_CMD_SLPOUT 0x11 /* Sleep out */ #define NT35510_CMD_PTLON 0x12 /* Partial mode on */ #define NT35510_CMD_NORON 0x13 /* Normal display mode on */ #define NT35510_CMD_INVOFF 0x20 /* Display inversion off */ #define NT35510_CMD_INVON 0x21 /* Display inversion on */ #define NT35510_CMD_ALLPOFF 0x22 /* All pixel off */ #define NT35510_CMD_ALLPON 0x23 /* All pixel on */ #define NT35510_CMD_GAMSET 0x26 /* Gamma set */ #define NT35510_CMD_DISPOFF 0x28 /* Display off */ #define NT35510_CMD_DISPON 0x29 /* Display on */ #define NT35510_CMD_CASET 0x2A /* Column address set */ #define NT35510_CMD_RASET 0x2B /* Row address set */ #define NT35510_CMD_RAMWR 0x2C /* Memory write */ #define NT35510_CMD_RAMRD 0x2E /* Memory read */ #define NT35510_CMD_PLTAR 0x30 /* Partial area */ #define NT35510_CMD_TOPC 0x32 /* Turn On Peripheral Command */ #define NT35510_CMD_TEOFF 0x34 /* Tearing effect line off */ #define NT35510_CMD_TEEON 0x35 /* Tearing effect line on */ #define NT35510_CMD_MADCTL 0x36 /* Memory data access control */ #define NT35510_CMD_IDMOFF 0x38 /* Idle mode off */ #define NT35510_CMD_IDMON 0x39 /* Idle mode on */ #define NT35510_CMD_COLMOD 0x3A /* Interface pixel format */ #define NT35510_CMD_RAMWRC 0x3C /* Memory write continue */ #define NT35510_CMD_RAMRDC 0x3E /* Memory read continue */ #define NT35510_CMD_STESL 0x44 /* Set tearing effect scan line */ #define NT35510_CMD_GSL 0x45 /* Get scan line */ #define NT35510_CMD_DSTBON 0x4F /* Deep standby mode on */ #define NT35510_CMD_WRPFD 0x50 /* Write profile value for display */ #define NT35510_CMD_WRDISBV 0x51 /* Write display brightness */ #define NT35510_CMD_RDDISBV 0x52 /* Read display brightness */ #define NT35510_CMD_WRCTRLD 0x53 /* Write CTRL display */ #define NT35510_CMD_RDCTRLD 0x54 /* Read CTRL display value */ #define NT35510_CMD_WRCABC 0x55 /* Write content adaptative brightness control */ #define NT35510_CMD_RDCABC 0x56 /* Read content adaptive brightness control */ #define NT35510_CMD_WRHYSTE 0x57 /* Write hysteresis */ #define NT35510_CMD_WRGAMMSET 0x58 /* Write gamme setting */ #define NT35510_CMD_RDFSVM 0x5A /* Read FS value MSBs */ #define NT35510_CMD_RDFSVL 0x5B /* Read FS value LSBs */ #define NT35510_CMD_RDMFFSVM 0x5C /* Read median filter FS value MSBs */ #define NT35510_CMD_RDMFFSVL 0x5D /* Read median filter FS value LSBs */ #define NT35510_CMD_WRCABCMB 0x5E /* Write CABC minimum brightness */ #define NT35510_CMD_RDCABCMB 0x5F /* Read CABC minimum brightness */ #define NT35510_CMD_WRLSCC 0x65 /* Write light sensor compensation coefficient value */ #define NT35510_CMD_RDLSCCM 0x66 /* Read light sensor compensation coefficient value MSBs */ #define NT35510_CMD_RDLSCCL 0x67 /* Read light sensor compensation coefficient value LSBs */ #define NT35510_CMD_RDBWLB 0x70 /* Read black/white low bits */ #define NT35510_CMD_RDBKX 0x71 /* Read Bkx */ #define NT35510_CMD_RDBKY 0x72 /* Read Bky */ #define NT35510_CMD_RDWX 0x73 /* Read Wx */ #define NT35510_CMD_RDWY 0x74 /* Read Wy */ #define NT35510_CMD_RDRGLB 0x75 /* Read red/green low bits */ #define NT35510_CMD_RDRX 0x76 /* Read Rx */ #define NT35510_CMD_RDRY 0x77 /* Read Ry */ #define NT35510_CMD_RDGX 0x78 /* Read Gx */ #define NT35510_CMD_RDGY 0x79 /* Read Gy */ #define NT35510_CMD_RDBALB 0x7A /* Read blue/acolor low bits */ #define NT35510_CMD_RDBX 0x7B /* Read Bx */ #define NT35510_CMD_RDBY 0x7C /* Read By */ #define NT35510_CMD_RDAX 0x7D /* Read Ax */ #define NT35510_CMD_RDAY 0x7E /* Read Ay */ #define NT35510_CMD_RDDDBS 0xA1 /* Read DDB start */ #define NT35510_CMD_RDDDBC 0xA8 /* Read DDB continue */ #define NT35510_CMD_RDDCS 0xAA /* Read first checksum */ #define NT35510_CMD_RDCCS 0xAF /* Read continue checksum */ #define NT35510_CMD_RDID1 0xDA /* Read ID1 value */ #define NT35510_CMD_RDID2 0xDB /* Read ID2 value */ #define NT35510_CMD_RDID3 0xDC /* Read ID3 value */ /** @} */ #endif /* ZEPHYR_DRIVERS_DISPLAY_DISPLAY_NT35510_H_ */