/* * Copyright (c) 2018 Yurii Hamann * * SPDX-License-Identifier: Apache-2.0 */ /dts-v1/; #include #include #include "arduino_r3_connector.dtsi" #include #include #include / { model = "STMicroelectronics STM32F746G DISCOVERY board"; compatible = "st,stm32f746g-disco"; chosen { zephyr,console = &usart1; zephyr,shell-uart = &usart1; zephyr,sram = &sram0; zephyr,flash = &flash0; zephyr,dtcm = &dtcm; zephyr,flash-controller = &n25q128a1; zephyr,display = <dc; zephyr,touch = &ft5336; }; leds { compatible = "gpio-leds"; green_led_1: led_1 { gpios = <&gpioi 1 GPIO_ACTIVE_HIGH>; label = "User LD1"; }; }; gpio_keys { compatible = "gpio-keys"; user_button: button { label = "User"; gpios = <&gpioi 11 GPIO_ACTIVE_HIGH>; zephyr,code = ; }; }; lvgl_pointer { compatible = "zephyr,lvgl-pointer-input"; input = <&ft5336>; }; sdram1: sdram@c0000000 { compatible = "zephyr,memory-region", "mmio-sram"; device_type = "memory"; reg = <0xc0000000 DT_SIZE_M(16)>; zephyr,memory-region = "SDRAM1"; zephyr,memory-attr = <( DT_MEM_ARM(ATTR_MPU_RAM) )>; }; aliases { led0 = &green_led_1; sw0 = &user_button; }; }; &clk_lsi { status = "okay"; }; &clk_hse { clock-frequency = ; status = "okay"; }; &pll { div-m = <25>; mul-n = <432>; div-p = <2>; div-q = <9>; clocks = <&clk_hse>; status = "okay"; }; &rcc { clocks = <&pll>; clock-frequency = ; ahb-prescaler = <1>; apb1-prescaler = <4>; apb2-prescaler = <2>; }; &i2c1 { pinctrl-0 = <&i2c1_scl_pb8 &i2c1_sda_pb9>; pinctrl-names = "default"; status = "okay"; clock-frequency = ; }; &i2c3 { pinctrl-0 = <&i2c3_scl_ph7 &i2c3_sda_ph8>; pinctrl-names = "default"; status = "okay"; clock-frequency = ; ft5336: ft5336@38 { compatible = "focaltech,ft5336"; reg = <0x38>; int-gpios = <&gpioi 13 0>; }; }; &spi2 { pinctrl-0 = <&spi2_sck_pi1 &spi2_miso_pb14 &spi2_mosi_pb15>; pinctrl-names = "default"; cs-gpios = <&gpioa 8 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>; status = "okay"; }; &usart1 { pinctrl-0 = <&usart1_tx_pa9 &usart1_rx_pb7>; pinctrl-names = "default"; current-speed = <115200>; status = "okay"; }; &usart6 { pinctrl-0 = <&usart6_tx_pc6 &usart6_rx_pc7>; pinctrl-names = "default"; current-speed = <115200>; status = "okay"; }; zephyr_udc0: &usbotg_fs { pinctrl-0 = <&usb_otg_fs_dm_pa11 &usb_otg_fs_dp_pa12>; pinctrl-names = "default"; status = "okay"; }; &timers3 { st,prescaler = <10000>; status = "okay"; pwm3: pwm { status = "okay"; pinctrl-0 = <&tim3_ch1_pb4>; pinctrl-names = "default"; }; }; &rtc { clocks = <&rcc STM32_CLOCK_BUS_APB1 0x10000000>, <&rcc STM32_SRC_LSI RTC_SEL(2)>; status = "okay"; backup_regs { status = "okay"; }; }; &sdmmc1 { status = "okay"; pinctrl-0 = <&sdmmc1_d0_pc8 &sdmmc1_d1_pc9 &sdmmc1_d2_pc10 &sdmmc1_d3_pc11 &sdmmc1_ck_pc12 &sdmmc1_cmd_pd2>; pinctrl-names = "default"; cd-gpios = <&gpioc 13 GPIO_ACTIVE_LOW>; }; &mac { status = "okay"; pinctrl-0 = <ð_mdc_pc1 ð_rxd0_pc4 ð_rxd1_pc5 ð_ref_clk_pa1 ð_mdio_pa2 ð_crs_dv_pa7 ð_tx_en_pg11 ð_txd0_pg13 ð_txd1_pg14>; pinctrl-names = "default"; }; &quadspi { pinctrl-0 = <&quadspi_clk_pb2 &quadspi_bk1_ncs_pb6 &quadspi_bk1_io0_pd11 &quadspi_bk1_io1_pd12 &quadspi_bk1_io2_pe2 &quadspi_bk1_io3_pd13>; pinctrl-names = "default"; status = "okay"; n25q128a1: qspi-nor-flash@90000000 { compatible = "st,stm32-qspi-nor"; reg = <0x90000000 DT_SIZE_M(16)>; /* 128 Mbits */ qspi-max-frequency = <72000000>; status = "okay"; partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; slot1_partition: partition@0 { label = "image-1"; reg = <0x00000000 DT_SIZE_K(640)>; }; storage_partition: partition@a0000 { label = "storage"; reg = <0x000a0000 DT_SIZE_M(15)>; }; }; }; }; &fmc { pinctrl-0 = <&fmc_nbl0_pe0 &fmc_nbl1_pe1 &fmc_sdclk_pg8 &fmc_sdnwe_ph5 &fmc_sdcke0_pc3 &fmc_sdne0_ph3 &fmc_sdnras_pf11 &fmc_sdncas_pg15 &fmc_a0_pf0 &fmc_a1_pf1 &fmc_a2_pf2 &fmc_a3_pf3 &fmc_a4_pf4 &fmc_a5_pf5 &fmc_a6_pf12 &fmc_a7_pf13 &fmc_a8_pf14 &fmc_a9_pf15 &fmc_a10_pg0 &fmc_a11_pg1 &fmc_a14_pg4 &fmc_a15_pg5 &fmc_d0_pd14 &fmc_d1_pd15 &fmc_d2_pd0 &fmc_d3_pd1 &fmc_d4_pe7 &fmc_d5_pe8 &fmc_d6_pe9 &fmc_d7_pe10 &fmc_d8_pe11 &fmc_d9_pe12 &fmc_d10_pe13 &fmc_d11_pe14 &fmc_d12_pe15 &fmc_d13_pd8 &fmc_d14_pd9 &fmc_d15_pd10>; pinctrl-names = "default"; status = "okay"; sdram { status = "okay"; power-up-delay = <100>; num-auto-refresh = <8>; mode-register = <0x220>; /* * Auto refresh command shall be issued every 15.625 us * and is calculated as ((15.625 * SDRAM_CLK_MHZ) - 20) * Note: SDRAM_CLK_MHZ = HCLK_MHZ / 2 (108 MHz) */ refresh-rate = <1667>; bank@0 { reg = <0>; st,sdram-control = ; st,sdram-timing = <2 6 4 6 2 2 2>; }; }; }; <dc { pinctrl-0 = <<dc_r0_pi15 <dc_r1_pj0 <dc_r2_pj1 <dc_r3_pj2 <dc_r4_pj3 <dc_r5_pj4 <dc_r6_pj5 <dc_r7_pj6 <dc_g0_pj7 <dc_g1_pj8 <dc_g2_pj9 <dc_g3_pj10 <dc_g4_pj11 <dc_g5_pk0 <dc_g6_pk1 <dc_g7_pk2 <dc_b0_pe4 <dc_b1_pj13 <dc_b2_pj14 <dc_b3_pj15 <dc_b4_pg12 <dc_b5_pk4 <dc_b6_pk5 <dc_b7_pk6 <dc_de_pk7 <dc_clk_pi14 <dc_hsync_pi10 <dc_vsync_pi9>; pinctrl-names = "default"; disp-on-gpios = <&gpioi 12 GPIO_ACTIVE_HIGH>; bl-ctrl-gpios = <&gpiok 3 GPIO_ACTIVE_HIGH>; ext-sdram = <&sdram1>; status = "okay"; width = <480>; height = <272>; pixel-format = ; display-timings { compatible = "zephyr,panel-timing"; de-active = <0>; pixelclk-active = <0>; hsync-active = <0>; vsync-active = <0>; hsync-len = <1>; vsync-len = <10>; hback-porch = <43>; vback-porch = <12>; hfront-porch = <8>; vfront-porch = <4>; }; def-back-color-red = <0xFF>; def-back-color-green = <0xFF>; def-back-color-blue = <0xFF>; };