# Nordic Semiconductor nRF54 MCU line

# Copyright (c) 2024 Nordic Semiconductor ASA
# SPDX-License-Identifier: Apache-2.0

config SOC_SERIES_NRF54LX
	select SOC_COMPATIBLE_NRF54LX
	select HAS_NRFX
	select HAS_NORDIC_DRIVERS
	select HAS_SEGGER_RTT if ZEPHYR_SEGGER_MODULE

config SOC_NRF54L15_CPUAPP
	select ARM
	select ARMV8_M_DSP
	select CPU_CORTEX_M33
	select CPU_HAS_ARM_MPU
	select CPU_HAS_ICACHE
	select CPU_HAS_ARM_SAU
	select CPU_HAS_FPU
	select HAS_HW_NRF_RADIO_IEEE802154
	select HAS_POWEROFF

config SOC_NRF54L20_ENGA_CPUAPP
	select ARM
	select ARMV8_M_DSP
	select CPU_CORTEX_M33
	select CPU_HAS_ARM_MPU
	select CPU_HAS_ICACHE
	select CPU_HAS_ARM_SAU
	select CPU_HAS_FPU
	select HAS_HW_NRF_RADIO_IEEE802154
	select HAS_POWEROFF

config SOC_NRF54L15_CPUFLPR
	depends on RISCV_CORE_NORDIC_VPR

if SOC_SERIES_NRF54LX

config SOC_NRF54LX_SKIP_CLOCK_CONFIG
	bool "Skip clock frequency configuration in system initialization"
	help
	  With this option, the CPU clock frequency is not set during system initialization.
	  The CPU runs with the default, hardware-selected frequency.

config SOC_NRF54LX_DISABLE_FICR_TRIMCNF
	bool "Disable trimming of the device"
	default y if TRUSTED_EXECUTION_NONSECURE
	help
	  Disable trimming of the device. When the device is trimmed it
	  will copy all the trimming values from FICR into the target
	  addresses.

config SOC_NRF54LX_SKIP_GLITCHDETECTOR_DISABLE
	bool "Skip disabling glitch detector"
	default y if TRUSTED_EXECUTION_NONSECURE
	help
	  With this option, the glitch detector is not disabled during system initialization.
	  The CPU runs with the default state of glitch detector.

config SOC_NRF_FORCE_CONSTLAT
	bool "Force constant-latency mode"
	help
	  In constant latency mode the CPU wakeup latency and the PPI task response
	  will be constant and kept at a minimum. This is secured by forcing a set
	  of base resources on while in sleep. The advantage of having a constant
	  and predictable latency will be at the cost of having increased power consumption.

if NRF_GRTC_TIMER

config ELV_GRTC_LFXO_ALLOWED
	bool
	depends on POWEROFF
	select EXPERIMENTAL
	help
	  This feature allows using ELV mode when GRTC operates with the LFXO as
	  a low-frequency clock source. The LFXO is automatically activated when
	  preparing to system-off.
	  WARNING! This feature is EXPERIMENTAL and may brick your device!

endif # NRF_GRTC_TIMER

endif # SOC_SERIES_NRF54LX