/* TI ADS1X1X ADC * * Copyright (c) 2021 Facebook, Inc * * SPDX-License-Identifier: Apache-2.0 */ #include #include #include #include #include #include #include #include #include #include #define ADC_CONTEXT_USES_KERNEL_TIMER #include "adc_context.h" LOG_MODULE_REGISTER(ADS1X1X, CONFIG_ADC_LOG_LEVEL); #if DT_ANY_COMPAT_HAS_PROP_STATUS_OKAY(ti_ads1115, alert_rdy_gpios) || \ DT_ANY_COMPAT_HAS_PROP_STATUS_OKAY(ti_ads1114, alert_rdy_gpios) || \ DT_ANY_COMPAT_HAS_PROP_STATUS_OKAY(ti_ads1015, alert_rdy_gpios) || \ DT_ANY_COMPAT_HAS_PROP_STATUS_OKAY(ti_ads1014, alert_rdy_gpios) #define ADC_ADS1X1X_TRIGGER #endif #define ADS1X1X_CONFIG_OS BIT(15) #define ADS1X1X_CONFIG_MUX(x) ((x) << 12) #define ADS1X1X_CONFIG_PGA(x) ((x) << 9) #define ADS1X1X_CONFIG_MODE BIT(8) #define ADS1X1X_CONFIG_DR(x) ((x) << 5) #define ADS1X1X_CONFIG_COMP_MODE BIT(4) #define ADS1X1X_CONFIG_COMP_POL BIT(3) #define ADS1X1X_CONFIG_COMP_LAT BIT(2) #define ADS1X1X_CONFIG_COMP_QUE(x) (x) #define ADS1X1X_THRES_POLARITY_ACTIVE BIT(15) enum ads1x1x_reg { ADS1X1X_REG_CONV = 0x00, ADS1X1X_REG_CONFIG = 0x01, ADS1X1X_REG_LO_THRESH = 0x02, ADS1X1X_REG_HI_THRESH = 0x03, }; enum { ADS1X15_CONFIG_MUX_DIFF_0_1 = 0, ADS1X15_CONFIG_MUX_DIFF_0_3 = 1, ADS1X15_CONFIG_MUX_DIFF_1_3 = 2, ADS1X15_CONFIG_MUX_DIFF_2_3 = 3, ADS1X15_CONFIG_MUX_SINGLE_0 = 4, ADS1X15_CONFIG_MUX_SINGLE_1 = 5, ADS1X15_CONFIG_MUX_SINGLE_2 = 6, ADS1X15_CONFIG_MUX_SINGLE_3 = 7, }; enum { /* ADS111X, ADS101X samples per second */ /* 8, 128 samples per second */ ADS1X1X_CONFIG_DR_8_128 = 0, /* 16, 250 samples per second */ ADS1X1X_CONFIG_DR_16_250 = 1, /* 32, 490 samples per second */ ADS1X1X_CONFIG_DR_32_490 = 2, /* 64, 920 samples per second */ ADS1X1X_CONFIG_DR_64_920 = 3, /* 128, 1600 samples per second (default) */ ADS1X1X_CONFIG_DR_128_1600 = 4, /* 250, 2400 samples per second */ ADS1X1X_CONFIG_DR_250_2400 = 5, /* 475, 3300 samples per second */ ADS1X1X_CONFIG_DR_475_3300 = 6, /* 860, 3300 samples per second */ ADS1X1X_CONFIG_DR_860_3300 = 7, /* Default data rate */ ADS1X1X_CONFIG_DR_DEFAULT = ADS1X1X_CONFIG_DR_128_1600 }; enum { /* +/-6.144V range = Gain 1/3 */ ADS1X1X_CONFIG_PGA_6144 = 0, /* +/-4.096V range = Gain 1/2 */ ADS1X1X_CONFIG_PGA_4096 = 1, /* +/-2.048V range = Gain 1 (default) */ ADS1X1X_CONFIG_PGA_2048 = 2, /* +/-1.024V range = Gain 2 */ ADS1X1X_CONFIG_PGA_1024 = 3, /* +/-0.512V range = Gain 4 */ ADS1X1X_CONFIG_PGA_512 = 4, /* +/-0.256V range = Gain 8 */ ADS1X1X_CONFIG_PGA_256 = 5 }; enum { ADS1X1X_CONFIG_MODE_CONTINUOUS = 0, ADS1X1X_CONFIG_MODE_SINGLE_SHOT = 1, }; enum { /* Traditional comparator with hysteresis (default) */ ADS1X1X_CONFIG_COMP_MODE_TRADITIONAL = 0, /* Window comparator */ ADS1X1X_CONFIG_COMP_MODE_WINDOW = 1 }; enum { /* ALERT/RDY pin is low when active (default) */ ADS1X1X_CONFIG_COMP_POLARITY_ACTIVE_LO = 0, /* ALERT/RDY pin is high when active */ ADS1X1X_CONFIG_COMP_POLARITY_ACTIVE_HI = 1 }; enum { /* Non-latching comparator (default) */ ADS1X1X_CONFIG_COMP_NON_LATCHING = 0, /* Latching comparator */ ADS1X1X_CONFIG_COMP_LATCHING = 1 }; enum { /* Assert ALERT/RDY after one conversions */ ADS1X1X_CONFIG_COMP_QUEUE_1 = 0, /* Assert ALERT/RDY after two conversions */ ADS1X1X_CONFIG_COMP_QUEUE_2 = 1, /* Assert ALERT/RDY after four conversions */ ADS1X1X_CONFIG_COMP_QUEUE_4 = 2, /* Disable the comparator and put ALERT/RDY in high state (default) */ ADS1X1X_CONFIG_COMP_QUEUE_NONE = 3 }; struct ads1x1x_config { struct i2c_dt_spec bus; #ifdef ADC_ADS1X1X_TRIGGER struct gpio_dt_spec alert_rdy; #endif const uint32_t odr_delay[8]; uint8_t resolution; bool multiplexer; bool pga; }; struct ads1x1x_data { const struct device *dev; struct adc_context ctx; k_timeout_t ready_time; struct k_sem acq_sem; int16_t *buffer; int16_t *repeat_buffer; struct k_thread thread; k_tid_t tid; bool differential; #ifdef ADC_ADS1X1X_TRIGGER struct gpio_callback gpio_cb; struct k_work work; #endif K_KERNEL_STACK_MEMBER(stack, CONFIG_ADC_ADS1X1X_ACQUISITION_THREAD_STACK_SIZE); }; #ifdef ADC_ADS1X1X_TRIGGER static inline int ads1x1x_setup_rdy_pin(const struct device *dev, bool enable) { int ret; const struct ads1x1x_config *config = dev->config; gpio_flags_t flags = enable ? GPIO_INPUT | config->alert_rdy.dt_flags : GPIO_DISCONNECTED; ret = gpio_pin_configure_dt(&config->alert_rdy, flags); if (ret < 0) { LOG_DBG("Could not configure gpio"); } return ret; } static inline int ads1x1x_setup_rdy_interrupt(const struct device *dev, bool enable) { const struct ads1x1x_config *config = dev->config; gpio_flags_t flags = enable ? GPIO_INT_EDGE_FALLING : GPIO_INT_DISABLE; int32_t ret; ret = gpio_pin_interrupt_configure_dt(&config->alert_rdy, flags); if (ret < 0) { LOG_DBG("Could not configure GPIO"); } return ret; } #endif static int ads1x1x_read_reg(const struct device *dev, enum ads1x1x_reg reg_addr, uint16_t *buf) { const struct ads1x1x_config *config = dev->config; uint16_t reg_val; int ret; ret = i2c_burst_read_dt(&config->bus, reg_addr, (uint8_t *)®_val, sizeof(reg_val)); if (ret != 0) { LOG_ERR("ADS1X1X[0x%X]: error reading register 0x%X (%d)", config->bus.addr, reg_addr, ret); return ret; } *buf = sys_be16_to_cpu(reg_val); return 0; } static int ads1x1x_write_reg(const struct device *dev, enum ads1x1x_reg reg_addr, uint16_t reg_val) { const struct ads1x1x_config *config = dev->config; uint8_t buf[3]; int ret; buf[0] = reg_addr; sys_put_be16(reg_val, &buf[1]); ret = i2c_write_dt(&config->bus, buf, sizeof(buf)); if (ret != 0) { LOG_ERR("ADS1X1X[0x%X]: error writing register 0x%X (%d)", config->bus.addr, reg_addr, ret); return ret; } return 0; } static int ads1x1x_start_conversion(const struct device *dev) { /* send start sampling command */ uint16_t config; int ret; ret = ads1x1x_read_reg(dev, ADS1X1X_REG_CONFIG, &config); if (ret != 0) { return ret; } config |= ADS1X1X_CONFIG_OS; ret = ads1x1x_write_reg(dev, ADS1X1X_REG_CONFIG, config); return ret; } #ifdef ADC_ADS1X1X_TRIGGER /* The ALERT/RDY pin can also be configured as a conversion ready * pin. Set the most-significant bit of the Hi_thresh register to 1 * and the most-significant bit of Lo_thresh register to 0 to enable * the pin as a conversion ready pin */ static int ads1x1x_enable_conv_ready_signal(const struct device *dev) { uint16_t thresh; int rc; /* set to 1 to enable conversion ALERT/RDY */ rc = ads1x1x_read_reg(dev, ADS1X1X_REG_HI_THRESH, &thresh); if (rc) { return rc; } thresh |= ADS1X1X_THRES_POLARITY_ACTIVE; rc = ads1x1x_write_reg(dev, ADS1X1X_REG_HI_THRESH, thresh); if (rc) { return rc; } /* set to 0 to enable conversion ALERT/RDY */ rc = ads1x1x_read_reg(dev, ADS1X1X_REG_LO_THRESH, &thresh); if (rc) { return rc; } thresh &= ~ADS1X1X_THRES_POLARITY_ACTIVE; rc = ads1x1x_write_reg(dev, ADS1X1X_REG_LO_THRESH, thresh); return rc; } #endif static inline int ads1x1x_acq_time_to_dr(const struct device *dev, uint16_t acq_time) { struct ads1x1x_data *data = dev->data; const struct ads1x1x_config *ads_config = dev->config; const uint32_t *odr_delay = ads_config->odr_delay; uint32_t odr_delay_us = 0; int odr = -EINVAL; uint16_t acq_value = ADC_ACQ_TIME_VALUE(acq_time); /* The ADS1x1x uses samples per seconds units with the lowest being 8SPS * and with acquisition_time only having 14b for time, this will not fit * within here for microsecond units. Use Tick units and allow the user to * specify the ODR directly. */ if (acq_time != ADC_ACQ_TIME_DEFAULT && ADC_ACQ_TIME_UNIT(acq_time) != ADC_ACQ_TIME_TICKS) { return -EINVAL; } if (acq_time == ADC_ACQ_TIME_DEFAULT) { odr = ADS1X1X_CONFIG_DR_DEFAULT; odr_delay_us = odr_delay[ADS1X1X_CONFIG_DR_DEFAULT]; } else { switch (acq_value) { case ADS1X1X_CONFIG_DR_8_128: odr = ADS1X1X_CONFIG_DR_8_128; odr_delay_us = odr_delay[ADS1X1X_CONFIG_DR_8_128]; break; case ADS1X1X_CONFIG_DR_16_250: odr = ADS1X1X_CONFIG_DR_16_250; odr_delay_us = odr_delay[ADS1X1X_CONFIG_DR_16_250]; break; case ADS1X1X_CONFIG_DR_32_490: odr = ADS1X1X_CONFIG_DR_32_490; odr_delay_us = odr_delay[ADS1X1X_CONFIG_DR_32_490]; break; case ADS1X1X_CONFIG_DR_64_920: odr = ADS1X1X_CONFIG_DR_64_920; odr_delay_us = odr_delay[ADS1X1X_CONFIG_DR_64_920]; break; case ADS1X1X_CONFIG_DR_128_1600: odr = ADS1X1X_CONFIG_DR_128_1600; odr_delay_us = odr_delay[ADS1X1X_CONFIG_DR_128_1600]; break; case ADS1X1X_CONFIG_DR_250_2400: odr = ADS1X1X_CONFIG_DR_250_2400; odr_delay_us = odr_delay[ADS1X1X_CONFIG_DR_250_2400]; break; case ADS1X1X_CONFIG_DR_475_3300: odr = ADS1X1X_CONFIG_DR_475_3300; odr_delay_us = odr_delay[ADS1X1X_CONFIG_DR_475_3300]; break; case ADS1X1X_CONFIG_DR_860_3300: odr = ADS1X1X_CONFIG_DR_860_3300; odr_delay_us = odr_delay[ADS1X1X_CONFIG_DR_860_3300]; break; default: break; } } /* As per the datasheet, 25us is needed to wake-up from power down mode */ odr_delay_us += 25; data->ready_time = K_USEC(odr_delay_us); return odr; } static int ads1x1x_wait_data_ready(const struct device *dev) { int rc; struct ads1x1x_data *data = dev->data; k_sleep(data->ready_time); uint16_t status = 0; rc = ads1x1x_read_reg(dev, ADS1X1X_REG_CONFIG, &status); if (rc != 0) { return rc; } while (!(status & ADS1X1X_CONFIG_OS)) { k_sleep(K_USEC(100)); rc = ads1x1x_read_reg(dev, ADS1X1X_REG_CONFIG, &status); if (rc != 0) { return rc; } } return rc; } static int ads1x1x_channel_setup(const struct device *dev, const struct adc_channel_cfg *channel_cfg) { const struct ads1x1x_config *ads_config = dev->config; struct ads1x1x_data *data = dev->data; uint16_t config = 0; int dr = 0; if (channel_cfg->channel_id != 0) { LOG_ERR("unsupported channel id '%d'", channel_cfg->channel_id); return -ENOTSUP; } if (channel_cfg->reference != ADC_REF_INTERNAL) { LOG_ERR("unsupported channel reference type '%d'", channel_cfg->reference); return -ENOTSUP; } if (ads_config->multiplexer) { /* the device has an input multiplexer */ if (channel_cfg->differential) { if (channel_cfg->input_positive == 0 && channel_cfg->input_negative == 1) { config |= ADS1X1X_CONFIG_MUX(ADS1X15_CONFIG_MUX_DIFF_0_1); } else if (channel_cfg->input_positive == 0 && channel_cfg->input_negative == 3) { config |= ADS1X1X_CONFIG_MUX(ADS1X15_CONFIG_MUX_DIFF_0_3); } else if (channel_cfg->input_positive == 1 && channel_cfg->input_negative == 3) { config |= ADS1X1X_CONFIG_MUX(ADS1X15_CONFIG_MUX_DIFF_1_3); } else if (channel_cfg->input_positive == 2 && channel_cfg->input_negative == 3) { config |= ADS1X1X_CONFIG_MUX(ADS1X15_CONFIG_MUX_DIFF_2_3); } else { LOG_ERR("unsupported input positive '%d' and input negative '%d'", channel_cfg->input_positive, channel_cfg->input_negative); return -ENOTSUP; } } else { if (channel_cfg->input_positive == 0) { config |= ADS1X1X_CONFIG_MUX(ADS1X15_CONFIG_MUX_SINGLE_0); } else if (channel_cfg->input_positive == 1) { config |= ADS1X1X_CONFIG_MUX(ADS1X15_CONFIG_MUX_SINGLE_1); } else if (channel_cfg->input_positive == 2) { config |= ADS1X1X_CONFIG_MUX(ADS1X15_CONFIG_MUX_SINGLE_2); } else if (channel_cfg->input_positive == 3) { config |= ADS1X1X_CONFIG_MUX(ADS1X15_CONFIG_MUX_SINGLE_3); } else { LOG_ERR("unsupported input positive '%d'", channel_cfg->input_positive); return -ENOTSUP; } } } else { /* only differential supported without multiplexer */ if (!((channel_cfg->differential) && (channel_cfg->input_positive == 0 && channel_cfg->input_negative == 1))) { LOG_ERR("unsupported input positive '%d' and input negative '%d'", channel_cfg->input_positive, channel_cfg->input_negative); return -ENOTSUP; } } /* store differential mode to determine supported resolution */ data->differential = channel_cfg->differential; dr = ads1x1x_acq_time_to_dr(dev, channel_cfg->acquisition_time); if (dr < 0) { LOG_ERR("unsupported channel acquisition time 0x%02x", channel_cfg->acquisition_time); return -ENOTSUP; } config |= ADS1X1X_CONFIG_DR(dr); if (ads_config->pga) { /* programmable gain amplifier support */ switch (channel_cfg->gain) { case ADC_GAIN_1_3: config |= ADS1X1X_CONFIG_PGA(ADS1X1X_CONFIG_PGA_6144); break; case ADC_GAIN_1_2: config |= ADS1X1X_CONFIG_PGA(ADS1X1X_CONFIG_PGA_4096); break; case ADC_GAIN_1: config |= ADS1X1X_CONFIG_PGA(ADS1X1X_CONFIG_PGA_2048); break; case ADC_GAIN_2: config |= ADS1X1X_CONFIG_PGA(ADS1X1X_CONFIG_PGA_1024); break; case ADC_GAIN_4: config |= ADS1X1X_CONFIG_PGA(ADS1X1X_CONFIG_PGA_512); break; case ADC_GAIN_8: config |= ADS1X1X_CONFIG_PGA(ADS1X1X_CONFIG_PGA_256); break; default: LOG_ERR("unsupported channel gain '%d'", channel_cfg->gain); return -ENOTSUP; } } else { /* no programmable gain amplifier, so only allow ADC_GAIN_1 */ if (channel_cfg->gain != ADC_GAIN_1) { LOG_ERR("unsupported channel gain '%d'", channel_cfg->gain); return -ENOTSUP; } } /* Only single shot supported */ config |= ADS1X1X_CONFIG_MODE; /* disable comparator */ config |= ADS1X1X_CONFIG_COMP_MODE; return ads1x1x_write_reg(dev, ADS1X1X_REG_CONFIG, config); } static int ads1x1x_validate_buffer_size(const struct adc_sequence *sequence) { size_t needed = sizeof(int16_t); if (sequence->options) { needed *= (1 + sequence->options->extra_samplings); } if (sequence->buffer_size < needed) { return -ENOMEM; } return 0; } static int ads1x1x_validate_sequence(const struct device *dev, const struct adc_sequence *sequence) { const struct ads1x1x_config *config = dev->config; struct ads1x1x_data *data = dev->data; uint8_t resolution = data->differential ? config->resolution : config->resolution - 1; int err; if (sequence->resolution != resolution) { LOG_ERR("unsupported resolution %d", sequence->resolution); return -ENOTSUP; } if (sequence->channels != BIT(0)) { LOG_ERR("only channel 0 supported"); return -ENOTSUP; } if (sequence->oversampling) { LOG_ERR("oversampling not supported"); return -ENOTSUP; } err = ads1x1x_validate_buffer_size(sequence); if (err) { LOG_ERR("buffer size too small"); return -ENOTSUP; } return 0; } static void adc_context_update_buffer_pointer(struct adc_context *ctx, bool repeat_sampling) { struct ads1x1x_data *data = CONTAINER_OF(ctx, struct ads1x1x_data, ctx); if (repeat_sampling) { data->buffer = data->repeat_buffer; } } static void adc_context_start_sampling(struct adc_context *ctx) { struct ads1x1x_data *data = CONTAINER_OF(ctx, struct ads1x1x_data, ctx); int ret; data->repeat_buffer = data->buffer; ret = ads1x1x_start_conversion(data->dev); if (ret != 0) { /* if we fail to complete the I2C operations to start * sampling, return an immediate error (likely -EIO) rather * than handing it off to the acquisition thread. */ adc_context_complete(ctx, ret); return; } /* Give semaphore only if the thread is running */ if (data->tid) { k_sem_give(&data->acq_sem); } } static int ads1x1x_adc_start_read(const struct device *dev, const struct adc_sequence *sequence) { int rc; struct ads1x1x_data *data = dev->data; rc = ads1x1x_validate_sequence(dev, sequence); if (rc != 0) { return rc; } data->buffer = sequence->buffer; #ifdef ADC_ADS1X1X_TRIGGER const struct ads1x1x_config *config = dev->config; if (config->alert_rdy.port) { rc = ads1x1x_setup_rdy_pin(dev, true); if (rc < 0) { LOG_ERR("Could not configure GPIO Alert/RDY"); return rc; } rc = ads1x1x_setup_rdy_interrupt(dev, true); if (rc < 0) { LOG_ERR("Could not configure Alert/RDY interrupt"); return rc; } } #endif adc_context_start_read(&data->ctx, sequence); return adc_context_wait_for_completion(&data->ctx); } static int ads1x1x_adc_read_async(const struct device *dev, const struct adc_sequence *sequence, struct k_poll_signal *async) { int rc; struct ads1x1x_data *data = dev->data; adc_context_lock(&data->ctx, async ? true : false, async); rc = ads1x1x_adc_start_read(dev, sequence); adc_context_release(&data->ctx, rc); return rc; } static int ads1x1x_adc_perform_read(const struct device *dev) { int rc; struct ads1x1x_data *data = dev->data; const struct ads1x1x_config *config = dev->config; int16_t buf; rc = ads1x1x_read_reg(dev, ADS1X1X_REG_CONV, &buf); if (rc != 0) { adc_context_complete(&data->ctx, rc); return rc; } /* The ads101x stores it's 12b data in the upper part * while the ads111x uses all 16b in the register, so * shift down. Data is also signed, so perform * division rather than shifting */ *data->buffer++ = buf / (1 << (16 - config->resolution)); adc_context_on_sampling_done(&data->ctx, dev); return rc; } static int ads1x1x_read(const struct device *dev, const struct adc_sequence *sequence) { return ads1x1x_adc_read_async(dev, sequence, NULL); } static void ads1x1x_acquisition_thread(void *p1, void *p2, void *p3) { ARG_UNUSED(p2); ARG_UNUSED(p3); const struct device *dev = p1; struct ads1x1x_data *data = dev->data; int rc; while (true) { k_sem_take(&data->acq_sem, K_FOREVER); rc = ads1x1x_wait_data_ready(dev); if (rc != 0) { LOG_ERR("failed to get ready status (err %d)", rc); adc_context_complete(&data->ctx, rc); continue; } ads1x1x_adc_perform_read(dev); } } #ifdef ADC_ADS1X1X_TRIGGER static void ads1x1x_work_fn(struct k_work *work) { struct ads1x1x_data *data; const struct device *dev; data = CONTAINER_OF(work, struct ads1x1x_data, work); dev = data->dev; ads1x1x_adc_perform_read(dev); } static void ads1x1x_conv_ready_cb(const struct device *gpio_dev, struct gpio_callback *cb, uint32_t pins) { struct ads1x1x_data *data; const struct device *dev; const struct ads1x1x_config *config; int rc; ARG_UNUSED(gpio_dev); data = CONTAINER_OF(cb, struct ads1x1x_data, gpio_cb); dev = data->dev; config = dev->config; if (config->alert_rdy.port) { rc = ads1x1x_setup_rdy_pin(dev, false); if (rc < 0) { return; } rc = ads1x1x_setup_rdy_interrupt(dev, false); if (rc < 0) { return; } } /* Execute outside of the ISR context */ k_work_submit(&data->work); } static int ads1x1x_init_interrupt(const struct device *dev) { const struct ads1x1x_config *config = dev->config; struct ads1x1x_data *data = dev->data; int rc; /* Disable the interrupt */ rc = ads1x1x_setup_rdy_pin(dev, false); if (rc < 0) { LOG_ERR("Could disable the alert/rdy gpio pin."); return rc; } rc = ads1x1x_setup_rdy_interrupt(dev, false); if (rc < 0) { LOG_ERR("Could disable the alert/rdy interrupts."); return rc; } gpio_init_callback(&data->gpio_cb, ads1x1x_conv_ready_cb, BIT(config->alert_rdy.pin)); rc = gpio_add_callback(config->alert_rdy.port, &data->gpio_cb); if (rc) { LOG_ERR("Could not set gpio callback."); return -rc; } /* Use the interruption generated by the pin RDY */ k_work_init(&data->work, ads1x1x_work_fn); rc = ads1x1x_enable_conv_ready_signal(dev); if (rc) { LOG_ERR("failed to configure ALERT/RDY pin (err=%d)", rc); return rc; } return 0; } #endif static int ads1x1x_init(const struct device *dev) { const struct ads1x1x_config *config = dev->config; struct ads1x1x_data *data = dev->data; data->dev = dev; k_sem_init(&data->acq_sem, 0, 1); if (!device_is_ready(config->bus.bus)) { LOG_ERR("I2C bus %s not ready", config->bus.bus->name); return -ENODEV; } #ifdef ADC_ADS1X1X_TRIGGER if (config->alert_rdy.port) { if (ads1x1x_init_interrupt(dev) < 0) { LOG_ERR("Failed to initialize interrupt."); return -EIO; } } else #endif { LOG_DBG("Using acquisition thread"); data->tid = k_thread_create(&data->thread, data->stack, K_THREAD_STACK_SIZEOF(data->stack), (k_thread_entry_t)ads1x1x_acquisition_thread, (void *)dev, NULL, NULL, CONFIG_ADC_ADS1X1X_ACQUISITION_THREAD_PRIO, 0, K_NO_WAIT); k_thread_name_set(data->tid, "adc_ads1x1x"); } adc_context_unlock_unconditionally(&data->ctx); return 0; } static const struct adc_driver_api ads1x1x_api = { .channel_setup = ads1x1x_channel_setup, .read = ads1x1x_read, .ref_internal = 2048, #ifdef CONFIG_ADC_ASYNC .read_async = ads1x1x_adc_read_async, #endif }; #define DT_INST_ADS1X1X(inst, t) DT_INST(inst, ti_ads##t) #define ADS1X1X_RDY_PROPS(n) \ .alert_rdy = GPIO_DT_SPEC_INST_GET_OR(n, alert_rdy_gpios, {0}), \ #define ADS1X1X_RDY(t, n) \ IF_ENABLED(DT_NODE_HAS_PROP(DT_INST_ADS1X1X(n, t), alert_rdy_gpios), \ (ADS1X1X_RDY_PROPS(n))) #define ADS1X1X_INIT(t, n, odr_delay_us, res, mux, pgab) \ static const struct ads1x1x_config ads##t##_config_##n = { \ .bus = I2C_DT_SPEC_GET(DT_INST_ADS1X1X(n, t)), \ .odr_delay = odr_delay_us, \ .resolution = res, \ .multiplexer = mux, \ .pga = pgab, \ IF_ENABLED(ADC_ADS1X1X_TRIGGER, (ADS1X1X_RDY(t, n))) \ }; \ static struct ads1x1x_data ads##t##_data_##n = { \ ADC_CONTEXT_INIT_LOCK(ads##t##_data_##n, ctx), \ ADC_CONTEXT_INIT_TIMER(ads##t##_data_##n, ctx), \ ADC_CONTEXT_INIT_SYNC(ads##t##_data_##n, ctx), \ }; \ DEVICE_DT_DEFINE(DT_INST_ADS1X1X(n, t), ads1x1x_init, NULL, &ads##t##_data_##n, \ &ads##t##_config_##n, POST_KERNEL, CONFIG_ADC_ADS1X1X_INIT_PRIORITY, \ &ads1x1x_api); /* The ADS111X provides 16 bits of data in binary two's complement format * A positive full-scale (+FS) input produces an output code of 7FFFh and a * negative full-scale (–FS) input produces an output code of 8000h. Single * ended signal measurements only use the positive code range from * 0000h to 7FFFh */ #define ADS111X_RESOLUTION 16 /* * Approximated ADS111x acquisition times in microseconds. These are * used for the initial delay when polling for data ready. * {8 SPS, 16 SPS, 32 SPS, 64 SPS, 128 SPS (default), 250 SPS, 475 SPS, 860 SPS} */ #define ADS111X_ODR_DELAY_US \ { \ 125000, 62500, 31250, 15625, 7813, 4000, 2105, 1163 \ } /* * ADS1115: 16 bit, multiplexer, programmable gain amplifier */ #define ADS1115_INIT(n) ADS1X1X_INIT(1115, n, ADS111X_ODR_DELAY_US, ADS111X_RESOLUTION, true, true) #undef DT_DRV_COMPAT #define DT_DRV_COMPAT ti_ads1115 DT_INST_FOREACH_STATUS_OKAY(ADS1115_INIT) /* * ADS1114: 16 bit, no multiplexer, programmable gain amplifier */ #define ADS1114_INIT(n) ADS1X1X_INIT(1114, n, ADS111X_ODR_DELAY_US, ADS111X_RESOLUTION, false, true) #undef DT_DRV_COMPAT #define DT_DRV_COMPAT ti_ads1114 DT_INST_FOREACH_STATUS_OKAY(ADS1114_INIT) /* * ADS1113: 16 bit, no multiplexer, no programmable gain amplifier */ #define ADS1113_INIT(n) \ ADS1X1X_INIT(1113, n, ADS111X_ODR_DELAY_US, ADS111X_RESOLUTION, false, false) #undef DT_DRV_COMPAT #define DT_DRV_COMPAT ti_ads1113 DT_INST_FOREACH_STATUS_OKAY(ADS1113_INIT) /* The ADS101X provides 12 bits of data in binary two's complement format * A positive full-scale (+FS) input produces an output code of 7FFh and a * negative full-scale (–FS) input produces an output code of 800h. Single * ended signal measurements only use the positive code range from * 000h to 7FFh */ #define ADS101X_RESOLUTION 12 /* * Approximated ADS101x acquisition times in microseconds. These are * used for the initial delay when polling for data ready. * {128 SPS, 250 SPS, 490 SPS, 920 SPS, 1600 SPS (default), 2400 SPS, 3300 SPS, 3300 SPS} */ #define ADS101X_ODR_DELAY_US \ { \ 7813, 4000, 2041, 1087, 625, 417, 303, 303 \ } /* * ADS1015: 12 bit, multiplexer, programmable gain amplifier */ #define ADS1015_INIT(n) ADS1X1X_INIT(1015, n, ADS101X_ODR_DELAY_US, ADS101X_RESOLUTION, true, true) #undef DT_DRV_COMPAT #define DT_DRV_COMPAT ti_ads1015 DT_INST_FOREACH_STATUS_OKAY(ADS1015_INIT) /* * ADS1014: 12 bit, no multiplexer, programmable gain amplifier */ #define ADS1014_INIT(n) ADS1X1X_INIT(1014, n, ADS101X_ODR_DELAY_US, ADS101X_RESOLUTION, false, true) #undef DT_DRV_COMPAT #define DT_DRV_COMPAT ti_ads1014 DT_INST_FOREACH_STATUS_OKAY(ADS1014_INIT) /* * ADS1013: 12 bit, no multiplexer, no programmable gain amplifier */ #define ADS1013_INIT(n) \ ADS1X1X_INIT(1013, n, ADS101X_ODR_DELAY_US, ADS101X_RESOLUTION, false, false) #undef DT_DRV_COMPAT #define DT_DRV_COMPAT ti_ads1013 DT_INST_FOREACH_STATUS_OKAY(ADS1013_INIT)