:orphan: .. _migration_3.7: Migration guide to Zephyr v3.7.0 (Working Draft) ################################################ This document describes the changes required when migrating your application from Zephyr v3.6.0 to Zephyr v3.7.0. Any other changes (not directly related to migrating applications) can be found in the :ref:`release notes`. .. contents:: :local: :depth: 2 Build System ************ * Completely overhauled the way SoCs and boards are defined. This requires all out-of-tree SoCs and boards to be ported to the new model. See the :ref:`hw_model_v2` for more detailed information. (:github:`69607`) * The following build-time generated headers: .. list-table:: :header-rows: 1 * - Affected header files * - ``app_version.h`` * - ``autoconf.h`` * - ``cmake_intdef.h`` * - ``core-isa-dM.h`` * - ``devicetree_generated.h`` * - ``driver-validation.h`` * - ``kobj-types-enum.h`` * - ``linker-kobject-prebuilt-data.h`` * - ``linker-kobject-prebuilt-priv-stacks.h`` * - ``linker-kobject-prebuilt-rodata.h`` * - ``mcuboot_version.h`` * - ``offsets.h`` * - ``otype-to-size.h`` * - ``otype-to-str.h`` * - ``strerror_table.h`` * - ``strsignal_table.h`` * - ``syscall_list.h`` * - ``version.h`` * - ``zsr.h`` as well as syscall headers & sources are now namespaced into the ``zephyr/`` folder. The change is largely automated, and the script can be found in :github:`63973`. For the time being, the compatibility Kconfig (:kconfig:option:`CONFIG_LEGACY_GENERATED_INCLUDE_PATH`) is enabled by default so that downstream applications will continue to compile, a warning message will be generated during CMake configuration time. This Kconfig will be deprecated and eventually removed in the future, developers are advised to update the include paths of these affected headers as soon as possible. Kernel ****** * All architectures are now required to define the new ``struct arch_esf``, which describes the members of a stack frame. This new struct replaces the named struct ``z_arch_esf_t``. (:github:`73593`) * The named struct ``z_arch_esf_t`` is now deprecated. Use ``struct arch_esf`` instead. (:github:`73593`) Boards ****** * Reordered D1 and D0 in the `pro_micro` connector gpio-map for SparkFun Pro Micro RP2040 to match original Pro Micro definition. Out-of-tree shields must be updated to reflect this change. (:github:`69994`) * ITE: Rename all SoC variant Kconfig options, e.g., ``CONFIG_SOC_IT82202_AX`` is renamed to ``CONFIG_SOC_IT82202AX``. All symbols are renamed as follows: ``SOC_IT81202BX``, ``SOC_IT81202CX``, ``SOC_IT81302BX``, ``SOC_IT81302CX``, ``SOC_IT82002AW``, ``SOC_IT82202AX``, ``SOC_IT82302AX``. And, rename the ``SOC_SERIES_ITE_IT8XXX2`` to ``SOC_SERIES_IT8XXX2``. (:github:`71680`) * For native_sim/posix: :kconfig:option:`CONFIG_EMUL` is no longer enabled by default when :kconfig:option:`CONFIG_I2C` is set. Users who need this setting enabled should set it in their project config file. (:github:`73067`) * LiteX: Renamed the ``compatible`` of the LiteX VexRiscV interrupt controller node from ``vexriscv-intc0`` to :dtcompatible:`litex,vexriscv-intc0`. (:github:`73211`) * `lairdconnect` boards are now `ezurio` boards. Laird Connectivity has rebranded to `Ezurio `_. Modules ******* Mbed TLS ======== * TLS 1.2, RSA, AES, DES, and all the hash algorithms except SHA-256 (SHA-224, SHA-384, SHA-512, MD5 and SHA-1) are not enabled by default anymore. Their respective Kconfig options now need to be explicitly enabled to be able to use them. * The Kconfig options previously named `CONFIG_MBEDTLS_MAC_*_ENABLED` have been renamed. The `_MAC` and `_ENABLED` parts have been removed from their names. * The :kconfig:option:`CONFIG_MBEDTLS_HASH_ALL_ENABLED` Kconfig option has been fixed to actually enable all the available hash algorithms. Previously, it used to only enable the SHA-2 ones. * The `CONFIG_MBEDTLS_HASH_SHA*_ENABLED` Kconfig options have been removed. They were duplicates of other Kconfig options which are now named `CONFIG_MBEDTLS_SHA*`. * The `CONFIG_MBEDTLS_MAC_ALL_ENABLED` Kconfig option has been removed. Its equivalent is the combination of :kconfig:option:`CONFIG_MBEDTLS_HASH_ALL_ENABLED` and :kconfig:option:`CONFIG_MBEDTLS_CMAC`. * The Kconfig options ``CONFIG_MBEDTLS_MAC_MD4_ENABLED``, ``CONFIG_MBEDTLS_CIPHER_ARC4_ENABLED`` and ``CONFIG_MBEDTLS_CIPHER_BLOWFISH_ENABLED`` were removed because they are no more supported in Mbed TLS. (:github:`73222`) MCUboot ======= Trusted Firmware-M ================== * The default MCUboot signature type has been changed from RSA-3072 to EC-P256. This affects builds that have MCUboot enabled in TF-M (:kconfig:option:`CONFIG_TFM_BL2`). If you wish to keep using RSA-3072, you need to set :kconfig:option:`CONFIG_TFM_MCUBOOT_SIGNATURE_TYPE` to `"RSA-3072"`. Otherwise, make sure to have your own signing keys of the signature type in use. zcbor ===== Device Drivers and Devicetree ***************************** * The :dtcompatible:`nxp,kinetis-pit` pit driver has changed it's compatible to :dtcompatible:`nxp,pit` and has been updated to support multiple channels. To configure the individual channels, you must add a child node with the compatible :dtcompatible:`nxp,pit-channel` and configure as below. The :kconfig:option:`CONFIG_COUNTER_MCUX_PIT` has also been renamed to :kconfig:option:`CONFIG_COUNTER_NXP_PIT` with regards to the renaming of the binding for the pit. (:github:`66336`) example: .. code-block:: devicetree / { pit0: pit@40037000 { /* Other Pit DT Attributes */ compatible = "nxp,pit"; status = "disabled"; num-channels = <1>; #address-cells = <1>; #size-cells = <0>; pit0_channel0: pit0_channel@0 { compatible = "nxp,pit-channel"; reg = <0>; status = "disabled"; }; }; * The :dtcompatible:`nxp,kinetis-ethernet` has been deprecated in favor of :dtcompatible:`nxp,enet`. All in tree SOCs were converted to use this new schema. Thus, all boards using NXP's ENET peripheral will need to align to this binding in DT, which also comes with a different version driver. Alternatively, the Ethernet node can be deleted and redefined as the old binding to use the deprecated legacy driver. The primary advantage of the new binding is to be able to abstract an arbitrary phy through the mdio API. (:github:`70400`) Example of a basic board level ENET DT definition: .. code-block:: devicetree &enet_mac { status = "okay"; pinctrl-0 = <&pinmux_enet>; pinctrl-names = "default"; phy-handle = <&phy>; zephyr,random-mac-address; phy-connection-type = "rmii"; }; &enet_mdio { status = "okay"; pinctrl-0 = <&pinmux_enet_mdio>; pinctrl-names = "default"; phy: phy@3 { compatible = "ethernet-phy"; reg = <3>; status = "okay"; }; }; * The :dtcompatible:`nxp,kinetis-lptmr` compatible string has been changed to :dtcompatible:`nxp,lptmr`. The old string will be usable for a short time, but should be replaced for it will be removed in the future. * Some of the driver API structs have been rename to have the required ``_driver_api`` suffix. (:github:`72182`) The following types have been renamed: * ``emul_sensor_backend_api`` to :c:struct:`emul_sensor_driver_api` * ``emul_bbram_backend_api`` to :c:struct:`emul_bbram_driver_api` * ``usbc_ppc_drv`` to :c:struct:`usbc_ppc_driver_api` * The driver for :dtcompatible:`maxim,max31790` got split up into a MFD and an actual PWM driver. (:github:`68433`) Previously, an instance of this device could have been defined like this: .. code-block:: devicetree max31790_max31790: max31790@20 { compatible = "maxim,max31790"; status = "okay"; reg = <0x20>; pwm-controller; #pwm-cells = <2>; }; This can be converted to: .. code-block:: devicetree max31790_max31790: max31790@20 { compatible = "maxim,max31790"; status = "okay"; reg = <0x20>; max31790_max31790_pwm: max31790_max31790_pwm { compatible = "maxim,max31790-pwm"; status = "okay"; pwm-controller; #pwm-cells = <2>; }; }; Analog-to-Digital Converter (ADC) ================================= Bluetooth HCI ============= * The ``BT_HCI_VS_EXT`` Kconfig option was deleted and the feature is now included in the :kconfig:option:`BT_HCI_VS` Kconfig option. * The ``BT_HCI_VS_EVT`` Kconfig option was removed, since vendor event support is implicit if the :kconfig:option:`BT_HCI_VS` option is enabled. * The bt_read_static_addr() API was removed. This wasn't really a completely public API, but since it was exposed by the public hci_driver.h header file the removal is mentioned here. Enable the :kconfig:option:`BT_HCI_VS` Kconfig option instead, and use vendor specific HCI commands API to get the Controller's Bluetooth static address when available. Charger ======= * Dropped ``constant-charge-current-max-microamp`` property in ``charger_max20335`` driver because it did not reflect real chip functionality. (:github:`69910`) * Added enum key to ``constant-charge-voltage-max-microvolt`` property in ``maxim,max20335-charger`` binding to indicate invalid devicetree values at build time. (:github:`69910`) Controller Area Network (CAN) ============================= * Removed the following deprecated CAN controller devicetree properties. Out-of-tree boards using these properties can switch to using the ``bitrate``, ``sample-point``, ``bitrate-data``, and ``sample-point-data`` devicetree properties (or rely on :kconfig:option:`CAN_DEFAULT_BITRATE` and :kconfig:option:`CAN_DEFAULT_BITRATE_DATA`) for specifying the initial CAN bitrate: * ``sjw`` * ``prop-seg`` * ``phase-seg1`` * ``phase-seg1`` * ``sjw-data`` * ``prop-seg-data`` * ``phase-seg1-data`` * ``phase-seg1-data`` The ``bus-speed`` and ``bus-speed-data`` CAN controller devicetree properties have been deprecated. (:github:`68714`) * Support for manual bus-off recovery was reworked (:github:`69460`): * Automatic bus recovery will always be enabled upon driver initialization regardless of Kconfig options. Since CAN controllers are initialized in "stopped" state, no unwanted bus-off recovery will be started at this point. * The Kconfig ``CONFIG_CAN_AUTO_BUS_OFF_RECOVERY`` was renamed (and inverted) to :kconfig:option:`CONFIG_CAN_MANUAL_RECOVERY_MODE`, which is disabled by default. This Kconfig option enables support for the :c:func:`can_recover()` API function and a new manual recovery mode (see the next bullet). * A new CAN controller operational mode :c:macro:`CAN_MODE_MANUAL_RECOVERY` was added. Support for this is only enabled if :kconfig:option:`CONFIG_CAN_MANUAL_RECOVERY_MODE` is enabled. Having this as a mode allows applications to inquire whether the CAN controller supports manual recovery mode via the :c:func:`can_get_capabilities` API function. The application can then either fail initialization or rely on automatic bus-off recovery. Having this as a mode furthermore allows CAN controller drivers not supporting manual recovery mode to fail early in :c:func:`can_set_mode` during application startup instead of failing when :c:func:`can_recover` is called at a later point in time. Display ======= * ST7735R based displays now use the MIPI DBI driver class. These displays must now be declared within a MIPI DBI driver wrapper device, which will manage interfacing with the display. Note that the `cmd-data-gpios` pin has changed polarity with this update, to align better with the new `dc-gpios` name. For an example, see below: .. code-block:: devicetree /* Legacy ST7735R display definition */ &spi0 { st7735r: st7735r@0 { compatible = "sitronix,st7735r"; reg = <0>; spi-max-frequency = <32000000>; reset-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; cmd-data-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; ... }; }; /* New display definition with MIPI DBI device */ #include ... mipi_dbi { compatible = "zephyr,mipi-dbi-spi"; reset-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; dc-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; spi-dev = <&spi0>; #address-cells = <1>; #size-cells = <0>; st7735r: st7735r@0 { compatible = "sitronix,st7735r"; reg = <0>; mipi-max-frequency = <32000000>; mipi-mode = ; ... }; }; Enhanced Serial Peripheral Interface (eSPI) =========================================== * The macros ``ESPI_SLAVE_TO_MASTER`` and ``ESPI_MASTER_TO_SLAVE`` were renamed to ``ESPI_TARGET_TO_CONTROLLER`` and ``ESPI_CONTROLLER_TO_TARGET`` respectively to reflect the new terminology in eSPI 1.5 specification. The enum values ``ESPI_VWIRE_SIGNAL_SLV_BOOT_STS``, ``ESPI_VWIRE_SIGNAL_SLV_BOOT_DONE`` and all ``ESPI_VWIRE_SIGNAL_SLV_GPIO_`` signals were renamed to ``ESPI_VWIRE_SIGNAL_TARGET_BOOT_STS``, ``ESPI_VWIRE_SIGNAL_TARGET_BOOT_DONE`` and ``ESPI_VWIRE_SIGNAL_TARGET_GPIO_`` respectively to reflect the new terminology in eSPI 1.5 specification. (:github:`68492`) Flash ===== General Purpose I/O (GPIO) ========================== GNSS ==== * Basic power management support has been added to the ``gnss-nmea-generic`` driver. If ``CONFIG_PM_DEVICE=y`` the driver is now initialized in suspended mode and the application needs to call :c:func:`pm_device_action_run` with :c:macro:`PM_DEVICE_ACTION_RESUME` to start up the driver. (:github:`71774`) Input ===== * The ``analog-axis`` deadzone calibration value has been changed to be relative to the raw ADC values, similarly to min and max. The data structures and properties have been renamed to reflect that (from ``out-deadzone`` to ``in-deadzone``) and when migrating to the new definition the value should be scaled accordingly. (:github:`70377`) * The ``holtek,ht16k33-keyscan`` driver has been converted to use the :ref:`input` subsystem, callbacks have to be migrated to use the input APIs, :dtcompatible:`zephyr,kscan-input` can be used for backward compatibility. (:github:`69875`) Interrupt Controller ==================== * The static auto-generation of the multilevel interrupt controller lookup table has been deprecated, and will be compiled only when the new compatibility Kconfig: :kconfig:option:`CONFIG_LEGACY_MULTI_LEVEL_TABLE_GENERATION` is enabled, which will eventually be removed in the coming releases. Multi-level interrupt controller drivers should be updated to use the newly created ``IRQ_PARENT_ENTRY_DEFINE`` macro to register itself with the new multi-level interrupt architecture. To make the macro easier to use, ``INTC_INST_ISR_TBL_OFFSET`` macro is made to deduce the software ISR table offset for a given driver instance, for pseudo interrupt controller child, use the ``INTC_CHILD_ISR_TBL_OFFSET`` macro instead. New devicetree macros (``DT_INTC_GET_AGGREGATOR_LEVEL`` & ``DT_INST_INTC_GET_AGGREGATOR_LEVEL``) have been added for an interrupt controller driver instance to pass its aggregator level into the ``IRQ_PARENT_ENTRY_DEFINE`` macro. LED Strip ========= * The property ``in-gpios`` defined in :dtcompatible:`worldsemi,ws2812-gpio` has been renamed to ``gpios``. (:github:`68514`) * The ``chain-length`` and ``color-mapping`` properties have been added to all LED strip bindings and are now mandatory. * Added a new mandatory ``length`` function which returns the length (number of pixels) of an LED strip device. * Made ``update_channels`` function optional and removed unimplemented functions. Sensors ======= Serial ====== Timer ===== regulator ========= * The :dtcompatible:`nxp,vref` driver no longer supports the ground selection function, as this setting should not be modified by the user. The DT property ``nxp,ground-select`` has been removed, users should remove this property from their devicetree if it is present. (:github:`70642`) Watchdog ======== * The ``nuvoton,npcx-watchdog`` driver has been changed to extend the max timeout period. The time of one watchdog count varies with the different pre-scalar settings. Removed :kconfig:option:`CONFIG_WDT_NPCX_DELAY_CYCLES` because it is no longer suitable to set the leading warning time. Instead, added the :kconfig:option:`CONFIG_WDT_NPCX_WARNING_LEADING_TIME_MS` to set the leading warning time in milliseconds. Bluetooth ********* Bluetooth Mesh ============== * The model metadata pointer declaration of :c:struct:`bt_mesh_model` has been changed to add ``const`` qualifiers. The data pointer of :c:struct:`bt_mesh_models_metadata_entry` got ``const`` qualifier too. The model's metadata structure and metadata raw value can be declared as permanent constants in the non-volatile memory. (:github:`69679`) * The model metadata pointer declaration of :c:struct:`bt_mesh_model` has been changed to a single ``const *`` and redundant metadata pointer from :c:struct:`bt_mesh_health_srv` is removed. Consequently, :code:`BT_MESH_MODEL_HEALTH_SRV` definition is changed to use variable argument notation. Now, when your implementation supports :kconfig:option:`CONFIG_BT_MESH_LARGE_COMP_DATA_SRV` and when you need to specify metadata for Health Server model, simply pass metadata as the last argument to the :code:`BT_MESH_MODEL_HEALTH_SRV` macro, otherwise omit the last argument. (:github:`71281`) Bluetooth Audio =============== * :kconfig:option:`CONFIG_BT_ASCS`, :kconfig:option:`CONFIG_BT_PERIPHERAL` and :kconfig:option:`CONFIG_BT_ISO_PERIPHERAL` are no longer enabled automatically when enabling :kconfig:option:`CONFIG_BT_BAP_UNICAST_SERVER`, and these must now be set explicitly in the project configuration file. (:github:`71993`) * The discover callback functions :code:`bt_cap_initiator_cb.unicast_discovery_complete` and :code:`bt_cap_commander_cb.discovery_complete` for CAP now contain an additional parameter for the set member. This needs to be added to all instances of CAP discovery callback functions defined. (:github:`72797`) * :c:func:`bt_bap_stream_start` no longer connects the CIS. To connect the CIS, the :c:func:`bt_bap_stream_connect` shall now be called before :c:func:`bt_bap_stream_start`. (:github:`73032`) * All occurrences of ``set_sirk`` have been changed to just ``sirk`` as the ``s`` in ``sirk`` stands for set. (:github:`73413`) Bluetooth Classic ================= * The source files of Host BR/EDR have been moved to ``subsys/bluetooth/host/classic``. The Header files of Host BR/EDR have been moved to ``include/zephyr/bluetooth/classic``. Removed the :kconfig:option:`CONFIG_BT_BREDR`. It is replaced by new option :kconfig:option:`CONFIG_BT_CLASSIC`. (:github:`69651`) Bluetooth Host ============== * The advertiser options :code:`BT_LE_ADV_OPT_USE_NAME` and :code:`BT_LE_ADV_OPT_FORCE_NAME_IN_AD` are deprecated in this release. The application need to include the device name explicitly. One way to do it is by adding the following to the advertising data or scan response data passed to the host: .. code-block:: c BT_DATA(BT_DATA_NAME_COMPLETE, CONFIG_BT_DEVICE_NAME, sizeof(CONFIG_BT_DEVICE_NAME) - 1) (:github:`71686`) * The field :code:`init_credits` in :c:type:`bt_l2cap_le_endpoint` has been removed as it was no longer used in Zephyr 3.4.0 and later. Any references to this field should be removed. No further action is needed. Networking ********** * Deprecate the :kconfig:option:`CONFIG_NET_SOCKETS_POSIX_NAMES` option. It is a legacy option and was used to allow user to call BSD socket API while not enabling POSIX API. This could cause complications when building applications that wanted to enable the :kconfig:option:`CONFIG_POSIX_API` option. This means that if the application wants to use normal BSD socket interface, then it needs to enable :kconfig:option:`CONFIG_POSIX_API`. If the application does not want or is not able to enable that option, then the socket API calls need to be prefixed by a ``zsock_`` string. All the sample applications that use BSD socket interface are changed to enable :kconfig:option:`CONFIG_POSIX_API`. Internally the network stack will not enable POSIX API option which means that various network libraries that use sockets, are converted to use the ``zsock_*`` API calls. (:github:`69950`) * The zperf zperf_results struct is changed to support 64 bits transferred bytes (total_len) and test duration (time_in_us and client_time_in_us), instead of 32 bits. This will make the long-duration zperf test show with correct throughput result. (:github:`69500`) * Each IPv4 address assigned to a network interface has an IPv4 netmask tied to it instead of being set for the whole interface. If there is only one IPv4 address specified for a network interface, nothing changes from the user point of view. But, if there is more than one IPv4 address / network interface, the netmask must be specified for each IPv4 address separately. (:github:`68419`) * Virtual network interface API no longer has the `input` callback. The input callback was used to read the inner IPv4/IPv6 packets in an IP tunnel. This incoming tunnel read is now implemented in `recv` callback. (:github:`70549`) * Virtual LAN (VLAN) implementation is changed to use the Virtual network interfaces. There are no API changes, but the type of a VLAN network interface is changed from `ETHERNET` to `VIRTUAL`. This could require changes to the code that sets the VLAN tags to a network interface. For example in the `net_eth_is_vlan_enabled()` API, the 2nd interface parameter must point to the main Ethernet interface, and not to the VLAN interface. (:github:`70345`) * Modified the ``wifi connect`` command to use key-value format for the arguments. In the previous implementation, we were identifying an option using its position in the argument string. This made it difficult to deal with optional arguments or extending the support for other options. Having this key-value format makes it easier to extend the options that can be passed to the connect command. ``wifi -h`` will give more information about the usage of connect command. (:github:`70024`) * The Kconfig ``CONFIG_NET_TCP_ACK_TIMEOUT`` has been deprecated. Its usage was limited to TCP handshake only, and in such case the total timeout should depend on the total retransmission timeout (as in other cases) making the config redundant and confusing. Use ``CONFIG_NET_TCP_INIT_RETRANSMISSION_TIMEOUT`` and ``CONFIG_NET_TCP_RETRY_COUNT`` instead to control the total timeout at the TCP level. (:github:`70731`) * In LwM2M API, the callback type :c:type:`lwm2m_engine_set_data_cb_t` has now an additional parameter ``offset``. This parameter is used to indicate the offset of the data during a Coap Block-wise transfer. Any post write, validate or some firmware callbacks should be updated to include this parameter. (:github:`72590`) * The DNS resolver and mDNS/LLMNR responders are converted to use socket service API. This means that the number of pollable sockets in the system might need to be increased. Please check that the values of :kconfig:option:`CONFIG_NET_SOCKETS_POLL_MAX` and :kconfig:option:`CONFIG_POSIX_MAX_FDS` are high enough. Unfortunately no exact values for these can be given as it depends on application needs and usage. (:github:`72834`) * The packet socket (type ``AF_PACKET``) protocol field in ``socket`` API call has changed. The protocol field should be in network byte order so that we are compatible with Linux socket calls. Linux expects the protocol field to be ``htons(ETH_P_ALL)`` if it is desired to receive all the network packets. See details in https://www.man7.org/linux/man-pages/man7/packet.7.html documentation. (:github:`73338`) Other Subsystems **************** hawkBit ======= * :kconfig:option:`CONFIG_HAWKBIT_PORT` is now an int instead of a string. :kconfig:option:`CONFIG_SETTINGS` needs to be enabled to use hawkBit, as it now uses the settings subsystem to store the hawkBit configuration. (:github:`68806`) LoRaWAN ======= MCUmgr ====== * The support for SHA-256 (when using checksum/hash functions), previously provided by either TinyCrypt or Mbed TLS, is now provided by either PSA or Mbed TLS. PSA is the recommended API going forward, however, if it is not already enabled (:kconfig:option:`CONFIG_MBEDTLS_PSA_CRYPTO_CLIENT`) and you have tight code size constraints, you may be able to save 1.3 KB by using Mbed TLS instead. Modem ===== * The ``CONFIG_MODEM_CHAT_LOG_BUFFER`` Kconfig option was renamed to :kconfig:option:`CONFIG_MODEM_CHAT_LOG_BUFFER_SIZE`. (:github:`70405`) .. _zephyr_3.7_posix_api_migration: POSIX API ========= * The :ref:`POSIX API Kconfig deprecations ` may require changes to Kconfig files (``prj.conf``, etc), as outlined in the release notes. A more automated approach is available via the provided migration script. Simply run the following: .. code-block:: bash $ python ${ZEPHYR_BASE}/scripts/utils/migrate_posix_kconfigs.py -r root_path Shell ===== State Machine Framework ======================= * The :c:macro:`SMF_CREATE_STATE` macro now always takes 5 arguments. The amount of arguments is now independent of the values of :kconfig:option:`CONFIG_SMF_ANCESTOR_SUPPORT` and :kconfig:option:`CONFIG_SMF_INITIAL_TRANSITION`. If the additional arguments are not used, they have to be set to ``NULL``. (:github:`71250`) * SMF now follows a more UML-like transition flow when the transition source is a parent of the state called by :c:func:`smf_run_state`. Exit actions up to (but not including) the Least Common Ancestor of the transition source and target state will be executed, as will entry actions from (but not including) the LCA down to the target state. (:github:`71675`) * Previously, calling :c:func:`smf_set_state` with a ``new_state`` set to NULL would execute all exit actions from the current state to the topmost parent, with the expectation the topmost exit action would terminate the state machine. Passing ``NULL`` is now not allowed. Instead create a 'terminate' state at the top level, and call :c:func:`smf_set_terminate` from its entry action. ZBus ==== Userspace ********* Architectures ************* * Function :c:func:`arch_start_cpu` has been renamed to :c:func:`arch_cpu_start`. (:github:`64987`) * ``CONFIG_ARM64_ENABLE_FRAME_POINTER`` is deprecated. Use :kconfig:option:`CONFIG_FRAME_POINTER` instead. (:github:`72646`) * x86 * Kconfigs ``CONFIG_DISABLE_SSBD`` and ``CONFIG_ENABLE_EXTENDED_IBRS`` are deprecated. Use :kconfig:option:`CONFIG_X86_DISABLE_SSBD` and :kconfig:option:`CONFIG_X86_ENABLE_EXTENDED_IBRS` instead. (:github:`69690`) * POSIX arch: * LLVM fuzzing support has been refactored. A test application now needs to provide its own ``LLVMFuzzerTestOneInput()`` hook instead of relying on a board provided one. Check ``samples/subsys/debug/fuzz/`` for an example. (:github:`71378`) Xtensa ======