CONFIG_NETWORKING=y
CONFIG_NET_UDP=y
CONFIG_NET_TCP=y
CONFIG_NET_IPV6=y
CONFIG_NET_IPV4=y
#CONFIG_NET_DHCPV4=y

CONFIG_NET_L2_ETHERNET=y
CONFIG_NET_L2_VIRTUAL=y
CONFIG_NET_L2_VIRTUAL_MGMT=y
CONFIG_NET_L2_IPIP=y

CONFIG_NET_MGMT=y
CONFIG_NET_MGMT_EVENT=y

CONFIG_ENTROPY_GENERATOR=y
CONFIG_TEST_RANDOM_GENERATOR=y
CONFIG_INIT_STACKS=y

CONFIG_NET_LOG=y
CONFIG_LOG=y

CONFIG_NET_STATISTICS=y

CONFIG_NET_PKT_RX_COUNT=32
CONFIG_NET_PKT_TX_COUNT=32
CONFIG_NET_BUF_RX_COUNT=32
CONFIG_NET_BUF_TX_COUNT=32

CONFIG_NET_IF_MAX_IPV6_COUNT=5
CONFIG_NET_IF_MAX_IPV4_COUNT=5
CONFIG_NET_IF_UNICAST_IPV6_ADDR_COUNT=3
CONFIG_NET_IF_MCAST_IPV6_ADDR_COUNT=4
CONFIG_NET_MAX_CONTEXTS=10

CONFIG_NET_SHELL=y

CONFIG_NET_CONFIG_SETTINGS=y

# The application will set things up itself so the config module should
# not try to set things up.
CONFIG_NET_CONFIG_AUTO_INIT=n

# First ethernet interface will use these settings.
CONFIG_NET_CONFIG_MY_IPV6_ADDR="2001:db8::1"
CONFIG_NET_CONFIG_MY_IPV4_ADDR="192.0.2.1"
CONFIG_NET_CONFIG_MY_IPV4_NETMASK="255.255.255.0"

# The peer values are used as a tunnel remote address.
CONFIG_NET_CONFIG_PEER_IPV6_ADDR="2001:db8::2"
CONFIG_NET_CONFIG_PEER_IPV4_ADDR="192.0.2.2"

# First tunneling interface will have these settings
CONFIG_NET_SAMPLE_IFACE2_MY_IPV6_ADDR="2001:db8:100::1"
# TEST-NET-2 from RFC 5737
CONFIG_NET_SAMPLE_IFACE2_MY_IPV4_ADDR="198.51.100.1"
CONFIG_NET_SAMPLE_IFACE2_MY_IPV4_NETMASK="255.255.255.0"

# Second tunneling interface
CONFIG_NET_SAMPLE_IFACE3_MY_IPV6_ADDR="2001:db8:200::1"
# TEST-NET-3 from RFC 5737
CONFIG_NET_SAMPLE_IFACE3_MY_IPV4_ADDR="203.0.113.1"
CONFIG_NET_SAMPLE_IFACE3_MY_IPV4_NETMASK="255.255.255.0"