# ATMEL AT86RF23x/212x configuration options

# Copyright (c) 2019 Gerson Fernando Budke
# SPDX-License-Identifier: Apache-2.0

menuconfig IEEE802154_RF2XX
	bool "ATMEL RF2XX Driver support"
	depends on NETWORKING
	select SPI
	select GPIO
	select NET_L2_IEEE802154_SUB_GHZ if NET_L2_IEEE802154

if IEEE802154_RF2XX

config IEEE802154_RF2XX_DRV_NAME
	string "ATMEL RF2XX Driver's name"
	default "IEEE802154_rf2xx"
	help
	  This option sets the driver name

config IEEE802154_RF2XX_NET_IF_NO_AUTO_START
	bool "RF2X must wait configuration before change to operational mode"
	help
	  This option allows user to set any configuration and/or filter before
	  radio became operational. For instance, the EUI-64 value can be
	  configured using NET_REQUEST_IEEE802154_SET_EXT_ADDR available from
	  ieee802154 management interface. When all configurations are done
	  net_if_up() can be invoked to bring interface up.

	  This option can be useful when using OpenThread or Zigbee. If you
	  have any doubt about this option leave it as default value.

config IEEE802154_RF2XX_RX_STACK_SIZE
	int "Driver's internal RX thread stack size"
	default 800
	help
	  This option sets the driver's stack size for its internal RX thread.
	  The default value should be sufficient, but in case it proves to be
	  a too little one, this option makes it easy to play with the size.

config IEEE802154_RF2XX_INIT_PRIO
	int "RF2X initialization priority"
	default 80
	help
	  Set the initialization priority number. Do not mess with it unless
	  you know what you are doing. Beware rf2xx requires gpio and spi to
	  be ready first (and sometime gpio should be the very first as spi
	  might need it too). And of course it has to start before the net stack.

endif