/* dw_i2c.h - header for Design Ware I2C operations */ /* * Copyright (c) 2015 Intel Corporation * * Redistribution and use in source and binary forms, with or without * modification, are permitted provided that the following conditions are met: * * 1) Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * * 2) Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * * 3) Neither the name of Intel Corporation nor the names of its contributors * may be used to endorse or promote products derived from this software without * specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE * POSSIBILITY OF SUCH DAMAGE. */ #ifndef __DRIVERS_I2C_DW_H #define __DRIVERS_I2C_DW_H #include #include #ifdef CONFIG_PCI #include #include #endif /* CONFIG_PCI */ #define I2C_DW_MAGIC_KEY 0x44570140 typedef void (*i2c_isr_cb_t)(struct device *port); #define IC_ACTIVITY (1 << 0) #define IC_ENABLE_BIT (1 << 0) /* dev->state values from IC_DATA_CMD Data transfer mode settings (bit 8) */ #define I2C_DW_STATE_READY (0) #define I2C_DW_CMD_SEND (1 << 0) #define I2C_DW_CMD_RECV (1 << 1) #define I2C_DW_CMD_ERROR (1 << 2) #define DW_ENABLE_TX_INT_I2C_MASTER (DW_INTR_STAT_TX_OVER | \ DW_INTR_STAT_TX_EMPTY | \ DW_INTR_STAT_TX_ABRT | \ DW_INTR_STAT_STOP_DET) #define DW_ENABLE_RX_INT_I2C_MASTER (DW_INTR_STAT_RX_UNDER | \ DW_INTR_STAT_RX_OVER | \ DW_INTR_STAT_RX_FULL | \ DW_INTR_STAT_STOP_DET) #define DW_ENABLE_TX_INT_I2C_SLAVE (DW_INTR_STAT_RD_REQ | \ DW_INTR_STAT_TX_ABRT | \ DW_INTR_STAT_STOP_DET) #define DW_ENABLE_RX_INT_I2C_SLAVE (DW_INTR_STAT_RX_FULL | \ DW_INTR_STAT_STOP_DET) #define DW_DISABLE_ALL_I2C_INT 0x00000000 /* IC_CON Low count and high count default values */ /* TODO verify values for high and fast speed */ #define I2C_STD_HCNT (CONFIG_I2C_CLOCK_SPEED * 4) #define I2C_STD_LCNT (CONFIG_I2C_CLOCK_SPEED * 5) #define I2C_FS_HCNT ((CONFIG_I2C_CLOCK_SPEED * 6) / 8) #define I2C_FS_LCNT ((CONFIG_I2C_CLOCK_SPEED * 7) / 8) #define I2C_HS_HCNT ((CONFIG_I2C_CLOCK_SPEED * 6) / 8) #define I2C_HS_LCNT ((CONFIG_I2C_CLOCK_SPEED * 7) / 8) /* * DesignWare speed values don't directly translate from the Zephyr speed * selections in include/i2c.h so here we do a little translation */ #define I2C_DW_SPEED_STANDARD 0x1 #define I2C_DW_SPEED_FAST 0x2 #define I2C_DW_SPEED_FAST_PLUS 0x2 #define I2C_DW_SPEED_HIGH 0x3 /* * These values have been randomly selected. It would be good to test different * watermark levels for performance capabilities */ #define I2C_DW_TX_WATERMARK 2 #define I2C_DW_RX_WATERMARK 7 #define I2C_DW_FIFO_DEPTH 16 struct dw_i2c_rom_config { uint32_t base_address; uint32_t interrupt_vector; uint32_t interrupt_mask; #ifdef CONFIG_PCI struct pci_dev_info pci_dev; #endif /* CONFIG_PCI */ i2c_isr_cb_t config_func; }; struct dw_i2c_dev_config { union dev_config app_config; volatile uint8_t state; /* last direction of transfer */ uint8_t slave_mode; uint8_t rx_len; uint8_t *rx_buffer; uint8_t tx_len; uint8_t *tx_buffer; uint8_t rx_tx_len; bool support_hs_mode; uint16_t hcnt; uint16_t lcnt; }; void dw_i2c_isr(struct device *port); extern int dw_i2c_initialize(struct device *port); #endif /* __DRIVERS_I2C_DW_H */