# Copyright (c) 2022 Carlo Caione # SPDX-License-Identifier: Apache-2.0 config PLIC bool "Platform Level Interrupt Controller (PLIC)" default y depends on DT_HAS_SIFIVE_PLIC_1_0_0_ENABLED select MULTI_LEVEL_INTERRUPTS select 2ND_LEVEL_INTERRUPTS help Platform Level Interrupt Controller provides support for external interrupt lines defined by the RISC-V SoC. if PLIC config PLIC_SUPPORTS_SOFT_INTERRUPT bool default y depends on DT_HAS_ANDESTECH_NCEPLIC100_ENABLED help Enabled when the PLIC supports software-triggered interrupts. config PLIC_SUPPORTS_TRIG_TYPE bool default y depends on DT_HAS_ANDESTECH_NCEPLIC100_ENABLED help Enabled when the PLIC supports multiple trigger types, such as level, edge, etc. if PLIC_SUPPORTS_TRIG_TYPE config PLIC_TRIG_TYPE_REG_OFFSET hex "Trigger type register offset" default 0x1080 if DT_HAS_ANDESTECH_NCEPLIC100_ENABLED help Offset to the 'trigger type' register. config PLIC_TRIG_TYPE_BITWIDTH int "Trigger type bitwidth" default 1 help Number of bits required to differentiate between the trigger types. config PLIC_SUPPORTS_TRIG_EDGE bool default y depends on DT_HAS_ANDESTECH_NCEPLIC100_ENABLED help Enabled when the PLIC supports edge-triggered interrupt. endif # PLIC_SUPPORTS_TRIG_TYPE config PLIC_IRQ_AFFINITY bool "Configure IRQ affinity" depends on SMP depends on MP_MAX_NUM_CPUS > 1 help Enable configuration of IRQ affinity. config PLIC_IRQ_AFFINITY_MASK hex "Default IRQ affinity mask" depends on PLIC_IRQ_AFFINITY default 0x1 help Default mask for the driver when IRQ affinity is enabled. config PLIC_SHELL bool "PLIC shell commands" depends on SHELL help Enable additional shell commands useful for debugging. Caution: This can use quite a bit of RAM (PLICs * IRQs * sizeof(uint16_t)). if PLIC_SHELL config PLIC_SHELL_IRQ_COUNT bool "IRQ count shell commands" default y help Records the number of hits per interrupt line and provide shell commands to access them. Caution: This can use quite a bit of RAM (PLICs * IRQs * sizeof(PLIC_IRQ_COUNT_TYPE)). config PLIC_SHELL_IRQ_AFFINITY bool "Shell commands to configure IRQ affinity" default y depends on PLIC_IRQ_AFFINITY help Provide shell commands to configure IRQ affinity in runtime. endif # PLIC_SHELL endif # PLIC