/*
 * Copyright (c) 2017 I-SENSE group of ICCS
 *
 * SPDX-License-Identifier: Apache-2.0
 */

#include "armv7-m.dtsi"

/ {
	sram0: memory {
		reg = <0x20000000 0x5000>;
	};

	flash0: flash {
		reg = <0x08000000 0x20000>;
	};

	clocks {
		clk_hse: clk-hse {
			#clock-cells = <0>;
			compatible = "fixed-clock";
			clock-frequency = <0>;
		};
	};

	soc {
		usart1: uart@40013800 {
			compatible = "st,stm32-usart", "st,stm32-uart";
			reg = <0x40013800 0x400>;
			interrupts = <37>;
			zephyr,irq-prio = <0>;
			baud-rate = <115200>;
			status = "disabled";
		};

		usart2: uart@40004400 {
			compatible = "st,stm32-usart", "st,stm32-uart";
			reg = <0x40004400 0x400>;
			interrupts = <38>;
			zephyr,irq-prio = <0>;
			baud-rate = <115200>;
			status = "disabled";
		};

		usart3: uart@40004800 {
			compatible = "st,stm32-usart", "st,stm32-uart";
			reg = <0x40004800 0x400>;
			interrupts = <39>;
			zephyr,irq-prio = <0>;
			baud-rate = <115200>;
			status = "disabled";
		};

		pin-controller {
			#address-cells = <1>;
			#size-cells = <1>;
			compatible = "st,stm32f103xb-pinctrl";
			ranges = <0 0x40010800 0x1400>;

			gpioa: gpio@40010800 {
				gpio-controller;
				#gpio-cells = <2>;
				reg = <0x0 0x400>;
				st,bank-name = "GPIOA";
			};

			gpiob: gpio@40010C00 {
				gpio-controller;
				#gpio-cells = <2>;
				reg = <0x400 0x400>;
				st,bank-name = "GPIOB";
			};

			gpioc: gpio@40011000 {
				gpio-controller;
				#gpio-cells = <2>;
				reg = <0x800 0x400>;
				st,bank-name = "GPIOC";
			};

			gpiod: gpio@40011400 {
				gpio-controller;
				#gpio-cells = <2>;
				reg = <0xc00 0x400>;
				st,bank-name = "GPIOD";
			};

			gpioe: gpio@40011800 {
				gpio-controller;
				#gpio-cells = <2>;
				reg = <0x1000 0x400>;
				st,bank-name = "GPIOE";
			};
		};
	};
};

&nvic {
	num-irq-prio-bits = <4>;
	num-irqs = <59>;
};