/* ST Microelectronics IIS2ICLX 2-axis accelerometer sensor driver * * Copyright (c) 2020 STMicroelectronics * * SPDX-License-Identifier: Apache-2.0 * * Datasheet: * https://www.st.com/resource/en/datasheet/iis2iclx.pdf */ #ifndef ZEPHYR_DRIVERS_SENSOR_IIS2ICLX_IIS2ICLX_H_ #define ZEPHYR_DRIVERS_SENSOR_IIS2ICLX_IIS2ICLX_H_ #include #include #include #include #include #include "iis2iclx_reg.h" #if DT_ANY_INST_ON_BUS_STATUS_OKAY(spi) #include #endif /* DT_ANY_INST_ON_BUS_STATUS_OKAY(spi) */ #if DT_ANY_INST_ON_BUS_STATUS_OKAY(i2c) #include #endif /* DT_ANY_INST_ON_BUS_STATUS_OKAY(i2c) */ #define IIS2ICLX_EN_BIT 0x01 #define IIS2ICLX_DIS_BIT 0x00 /* Accel sensor sensitivity grain is 15 ug/LSB */ #define GAIN_UNIT_XL (15LL) #define SENSOR_PI_DOUBLE (SENSOR_PI / 1000000.0) #define SENSOR_DEG2RAD_DOUBLE (SENSOR_PI_DOUBLE / 180) #define SENSOR_G_DOUBLE (SENSOR_G / 1000000.0) struct iis2iclx_config { stmdev_ctx_t ctx; union { #if DT_ANY_INST_ON_BUS_STATUS_OKAY(i2c) const struct i2c_dt_spec i2c; #endif #if DT_ANY_INST_ON_BUS_STATUS_OKAY(spi) const struct spi_dt_spec spi; #endif } stmemsc_cfg; uint8_t odr; uint8_t range; #ifdef CONFIG_IIS2ICLX_TRIGGER bool trig_enabled; uint8_t int_pin; const struct gpio_dt_spec gpio_drdy; #endif /* CONFIG_IIS2ICLX_TRIGGER */ }; #define IIS2ICLX_SHUB_MAX_NUM_SLVS 2 struct iis2iclx_data { const struct device *dev; int16_t acc[2]; uint32_t acc_gain; #if defined(CONFIG_IIS2ICLX_ENABLE_TEMP) int temp_sample; #endif #if defined(CONFIG_IIS2ICLX_SENSORHUB) uint8_t ext_data[2][6]; uint16_t magn_gain; struct hts221_data { int16_t x0; int16_t x1; int16_t y0; int16_t y1; } hts221; bool shub_inited; uint8_t num_ext_dev; uint8_t shub_ext[IIS2ICLX_SHUB_MAX_NUM_SLVS]; #endif /* CONFIG_IIS2ICLX_SENSORHUB */ uint16_t accel_freq; uint8_t accel_fs; #ifdef CONFIG_IIS2ICLX_TRIGGER struct gpio_callback gpio_cb; sensor_trigger_handler_t handler_drdy_acc; sensor_trigger_handler_t handler_drdy_temp; #if defined(CONFIG_IIS2ICLX_TRIGGER_OWN_THREAD) K_KERNEL_STACK_MEMBER(thread_stack, CONFIG_IIS2ICLX_THREAD_STACK_SIZE); struct k_thread thread; struct k_sem gpio_sem; #elif defined(CONFIG_IIS2ICLX_TRIGGER_GLOBAL_THREAD) struct k_work work; #endif #endif /* CONFIG_IIS2ICLX_TRIGGER */ }; #if defined(CONFIG_IIS2ICLX_SENSORHUB) int iis2iclx_shub_init(const struct device *dev); int iis2iclx_shub_fetch_external_devs(const struct device *dev); int iis2iclx_shub_get_idx(const struct device *dev, enum sensor_channel type); int iis2iclx_shub_config(const struct device *dev, enum sensor_channel chan, enum sensor_attribute attr, const struct sensor_value *val); #endif /* CONFIG_IIS2ICLX_SENSORHUB */ #ifdef CONFIG_IIS2ICLX_TRIGGER int iis2iclx_trigger_set(const struct device *dev, const struct sensor_trigger *trig, sensor_trigger_handler_t handler); int iis2iclx_init_interrupt(const struct device *dev); #endif #endif /* ZEPHYR_DRIVERS_SENSOR_IIS2ICLX_IIS2ICLX_H_ */