# IEEE 802.15.4 driver configuration options # Copyright (c) 2015 Intel Corporation # SPDX-License-Identifier: Apache-2.0 # # IEEE 802.15.4 options # menuconfig IEEE802154 bool "IEEE 802.15.4 drivers options" default y if NET_L2_PHY_IEEE802154 if IEEE802154 config IEEE802154_NET_IF_NO_AUTO_START bool "Disable 802.15.4 interface auto-start" help This option allows user to set any configuration and/or filter before the radio becomes operational. For instance, the EUI-64 value can be configured using net_if_set_link_addr(iface, mac, 8, NET_LINK_IEEE802154). When all configurations are done net_if_up() has to be invoked to bring the interface up. This option can be useful when using OpenThread or Zigbee. If you have any doubt about this option leave it as default value. config IEEE802154_RAW_MODE bool "Use IEEE 802.15.4 driver without the MAC stack" select NET_RAW_MODE help This option enables using the drivers in a so-called "raw" mode, i.e. without a MAC stack (the net L2 layer for 802.15.4 will not be built). Used only for very specific cases, such as wpan_serial and wpanusb samples. config IEEE802154_RDEV bool help PHY is a ranging-capable device (RDEV) config IEEE802154_VENDOR_OUI_ENABLE bool "Enables setting Vendor Organizationally Unique Identifier" help This option enables setting custom vendor OUI using IEEE802154_VENDOR_OUI. After enabling, user is obliged to set IEEE802154_VENDOR_OUI value, as this option has no default value. if IEEE802154_VENDOR_OUI_ENABLE config IEEE802154_VENDOR_OUI int "Vendor Organizationally Unique Identifier" help Custom vendor OUI, which makes 24 most-significant bits of MAC address endif # IEEE802154_VENDOR_OUI_ENABLE source "drivers/ieee802154/Kconfig.b91" source "drivers/ieee802154/Kconfig.cc2520" source "drivers/ieee802154/Kconfig.kw41z" source "drivers/ieee802154/Kconfig.mcr20a" source "drivers/ieee802154/Kconfig.nrf5" source "drivers/ieee802154/Kconfig.cc1200" source "drivers/ieee802154/Kconfig.cc13xx_cc26xx" source "drivers/ieee802154/Kconfig.rf2xx" source "drivers/ieee802154/Kconfig.dw1000" menuconfig IEEE802154_UPIPE bool "UART PIPE fake radio driver support for QEMU" depends on (BOARD_QEMU_X86 || BOARD_QEMU_CORTEX_M3) && NETWORKING select UART_PIPE if IEEE802154_UPIPE config IEEE802154_UPIPE_DRV_NAME string "UART PIPE Driver name" default "IEEE802154_UPIPE" config IEEE802154_UPIPE_HW_FILTER bool "Hw Filtering" default y help This option assure the driver will process just frames addressed to him. config IEEE802154_UPIPE_RANDOM_MAC bool "Random MAC address" default y help Generate a random MAC address dynamically. if ! IEEE802154_UPIPE_RANDOM_MAC config IEEE802154_UPIPE_MAC4 hex "MAC Address Byte 4" default 0 range 0 0xff help This is the byte 4 of the MAC address. config IEEE802154_UPIPE_MAC5 hex "MAC Address Byte 5" default 0 range 0 0xff help This is the byte 5 of the MAC address. config IEEE802154_UPIPE_MAC6 hex "MAC Address Byte 6" default 0 range 0 0xff help This is the byte 6 of the MAC address. config IEEE802154_UPIPE_MAC7 hex "MAC Address Byte 7" default 0 range 0 0xff help This is the byte 7 of the MAC address. endif # IEEE802154_UPIPE_RANDOM_MAC endif # IEEE802154_UPIPE config IEEE802154_2015 bool "Enable support for IEEE 802.15.4-2015 frames" help Enable radio driver support for IEEE 802.15.4-2015 frames, including security handling of frames and ACKs. config IEEE802154_DELAY_TRX_ACC int "Clock accuracy for delayed operations" default 20 help Accuracy of the clock used for scheduling radio delayed operations (delayed transmission or delayed reception), in ppm. config IEEE802154_CSL_ENDPOINT bool "Enable support for CSL Endpoint" help Enable support for CSL Endpoint with delayed reception handling and CSL IE injection. module = IEEE802154_DRIVER module-str = IEEE 802.15.4 driver module-help = Sets log level for IEEE 802.15.4 Device Drivers. source "subsys/logging/Kconfig.template.log_config" endif # IEEE802154