/* SPDX-License-Identifier: Apache-2.0 */

#include <dt-bindings/usb-c/pd.h>

/ {
	aliases {
		usbc-port0 = &port0;
	};

	ports {
		#address-cells = <1>;
		#size-cells = <0>;

		port0: usbc-port@0 {
			compatible = "usb-c-connector";
			reg = <0>;
			tcpc = <&tcpc0>;
			vbus = <&vbus0>;
			ppc = <&ppc0>;
			power-role = "sink";
			sink-pdos = <PDO_FIXED(5000, 100, 0)>;
		};
	};
};

&pinctrl {
	tcpc0_default: tcpc0_default {
		group0 {
			pinmux = <PA12MFP_GPIO>;
			digital-path-disable;
		};
		group1 {
			pinmux = <PC0MFP_UTCPD0_CC1>,
				 <PC1MFP_UTCPD0_CC2>,
				 <PC2MFP_UTCPD0_CCDB1>,
				 <PC3MFP_UTCPD0_CCDB2>,
				 <PA1MFP_GPIO>,
				 <PA3MFP_UTCPD0_VBSNKEN>;
		};
	};

	eadc0_default: eadc0_default {
		group0 {
			pinmux = <PB15MFP_EADC0_CH15>;
			digital-path-disable;
		};
	};
};

&tcpc0 {
	status = "okay";
	pinctrl-0 = <&tcpc0_default>;
	pinctrl-names = "default";
	gpios = <&gpioa 12 0>,
		<&gpioa 1 GPIO_ACTIVE_HIGH>;
	gpio-names = "vbus-detect", "vbus-discharge";
	vbus-sink-enable-polarity = "high-active";
	vbus-divide = "divide-10";
	io-channels = <&eadc0 15>;
	io-channel-names = "chn-vbus";
};

&vbus0 {
	status = "okay";
};

&ppc0 {
	status = "okay";
};

&eadc0 {
	status = "okay";
	pinctrl-0 = <&eadc0_default>;
	pinctrl-names = "default";
	#address-cells = <1>;
	#size-cells = <0>;

	channel@15 {
		reg = <15>;
		zephyr,gain = "ADC_GAIN_1";
		zephyr,reference = "ADC_REF_EXTERNAL0";
		zephyr,vref-mv = <3300>;
		zephyr,acquisition-time = <ADC_ACQ_TIME(ADC_ACQ_TIME_TICKS, 0x80)>;
	};
};

/* Enable GPIO modules which are needed for below use cases:
 * 1. GPIO pins
 * 2. Power pins which need to disable digital input path
 */
&gpioa {
	status = "okay";
};
&gpiob {
	status = "okay";
};