# Kconfig - serial driver configuration options

#
# Copyright (c) 2014-2015 Wind River Systems, Inc.
#
# Redistribution and use in source and binary forms, with or without
# modification, are permitted provided that the following conditions are met:
#
# 1) Redistributions of source code must retain the above copyright notice,
# this list of conditions and the following disclaimer.
#
# 2) Redistributions in binary form must reproduce the above copyright notice,
# this list of conditions and the following disclaimer in the documentation
# and/or other materials provided with the distribution.
#
# 3) Neither the name of Wind River Systems nor the names of its contributors
# may be used to endorse or promote products derived from this software without
# specific prior written permission.
#
# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
# POSSIBILITY OF SUCH DAMAGE.
#

menuconfig SERIAL
	bool
	prompt "Serial Drivers"
	default n
	help
	Enable options for serial drivers.

if SERIAL

config SERIAL_HAS_DRIVER
	bool
	default n
	help
	This is an option to be enabled by individual serial driver
	to signal that there is a serial driver. This is being used
	by other drivers which are dependent on serial.

menu "Serial Port Options"

config SERIAL_INTERRUPT_LEVEL
	bool "Serial interrupt level"
	depends on IOAPIC
	default y
	help
	Option signifies that the serial controller uses level interrupts
	instead of edge

config SERIAL_INTERRUPT_LOW
	bool "Serial interrupt low"
	depends on IOAPIC
	default n
	help
	Option signifies that the serial controller uses low level interrupts
	instead of high

config  UART_INTERRUPT_DRIVEN
	bool
	prompt "Interrupt driven UART support"
	default n
	help
	This option enables interrupt support for UART allowing console
	input and UART based drivers.
endmenu

config NS16550
	bool "NS16550 serial driver"
	default n
	select SERIAL_HAS_DRIVER
	help
	This option enables the NS16550 serial driver.
	This driver can be used for the serial hardware
	available on x86 platforms such as basic_atom and
	basic_minuteia.

config NS16550_PCI
	bool "NS16550 PCI serial driver"
	default n
	depends on PCI && NS16550
	help
	This enables NS16550 to probe for PCI-based serial devices.

	This option enables the driver to auto-detect the device
	configuration required to access those ports.

config NS16550_PORT_0_BASE_ADDR
	hex "NS16550 port 0 PCI base address"
	default 0x00000000
	depends on NS16550_PCI

config NS16550_PORT_1_BASE_ADDR
	hex "NS16550 port 1 PCI base address"
	default 0x00000000
	depends on NS16550_PCI

config K20_UART
	bool "K20 serial driver"
	default n
	select SERIAL_HAS_DRIVER
	help
	This option enables the K20 serial driver.
	This specific driver can be used for the serial hardware
	available at the Freescale FRDM K64F platform.

config STELLARIS_UART
	bool "Stellaris serial driver"
	default n
	select SERIAL_HAS_DRIVER
	help
	This option enables the Stellaris serial driver.
	This specific driver can be used for the serial hardware
	available at the Texas Instrument LM3S6965 platform.


config UART_PORT_0_NAME
	string
	default "UART_0"
	help
	This is the device name for UART, and is included in the device
	struct.

config UART_PORT_1_NAME
	string
	default "UART_1"
	help
	This is the device name for UART, and is included in the device
	struct.

config UART_PORT_2_NAME
	string
	default "UART_2"
	help
	This is the device name for UART, and is included in the device
	struct.

config UART_PORT_3_NAME
	string
	default "UART_3"
	help
	This is the device name for UART, and is included in the device
	struct.

config UART_PORT_4_NAME
	string
	default "UART_4"
	help
	This is the device name for UART, and is included in the device
	struct.

config UART_PORT_5_NAME
	string
	default "UART_5"
	help
	This is the device name for UART, and is included in the device
	struct.

config UART_PORT_6_NAME
	string
	default "UART_6"
	help
	This is the device name for UART, and is included in the device
	struct.

config UART_PORT_7_NAME
	string
	default "UART_7"
	help
	This is the device name for UART, and is included in the device
	struct.

endif