.. _x-nucleo-iks01a2-sample: X-NUCLEO-IKS01A2: MEMS inertial and environmental multi-sensor shield ##################################################################### Overview ******** This sample enables all sensors of a X-NUCLEO-IKS01A2 shield, and then periodically reads and displays data from the shield sensors: - HTS221: Ambient temperature and relative humidity - LPS22HB: Atmospheric pressure and ambient temperature - LSM6DSL: 3-Axis Acceleration and 3-Axis Angular Velocity - LSM303AGR 3-Axis Acceleration and 3-axis Magnetic field intensity Requirements ************ This sample communicates over I2C with the X-NUCLEO-IKS01A2 shield stacked on a board with an Arduino connector. The board's I2C must be configured for the I2C Arduino connector (both for pin muxing and device tree). See for example the :ref:`nucleo_f401re_board` board source code: - :zephyr_file:`boards/arm/nucleo_f401re/nucleo_f401re.dts` - :zephyr_file:`boards/arm/nucleo_f401re/pinmux.c` Please note that this sample can't be used with boards already supporting one of the sensors available on the shield (such as disco_l475_iot1) as zephyr does not yet support sensors multiple instances. References ********** -X-NUCLEO-IKS01A2: http://www.st.com/en/ecosystems/x-nucleo-iks01a2.html Building and Running ******************** This sample runs with X-NUCLEO-IKS01A2 stacked on any board with a matching Arduino connector. For this example, we use a :ref:`nucleo_f401re_board` board. .. zephyr-app-commands:: :zephyr-app: samples/shields/x_nucleo_iks01a2 :board: nucleo_f401re :goals: build :compact: Sample Output ============= .. code-block:: console X-NUCLEO-IKS01A2 sensor dashboard HTS221: Temperature: 26.3 C HTS221: Relative Humidity: 44.5% LPS22HB: Pressure:99.220 kpa LPS22HB: Temperature: 26.1 C LSM6DSL: Accel (m.s-2): x: -0.0, y: -0.1, z: 10.0 LSM6DSL: Gyro (dps): x: 0.028, y: -0.025, z: 0.014 LSM303AGR: Accel (m.s-2): x: 0.3, y: -0.1, z: 9.7 LSM303AGR: Magn (gauss): x: -0.221, y: -0.042, z: -0.458