/* * Copyright (c) 2018 Endre Karlson * * SPDX-License-Identifier: Apache-2.0 */ #include / { soc { pinctrl: pin-controller@50000000 { gpioe: gpio@50001000 { compatible = "st,stm32-gpio"; gpio-controller; #gpio-cells = <2>; reg = <0x50001000 0x400>; clocks = <&rcc STM32_CLOCK_BUS_IOP 0x00000010>; label = "GPIOE"; }; }; i2c2: i2c@40005800 { compatible = "st,stm32-i2c-v2"; clock-frequency = ; #address-cells = <1>; #size-cells = <0>; reg = <0x40005800 0x400>; clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00400000>; interrupts = <24 0>; interrupt-names = "combined"; status = "disabled"; label= "I2C_2"; }; i2c3: i2c@40007800 { compatible = "st,stm32-i2c-v2"; clock-frequency = ; #address-cells = <1>; #size-cells = <0>; reg = <0x40007800 0x400>; clocks = <&rcc STM32_CLOCK_BUS_APB1 0x40000000>; interrupts = <21 0>; interrupt-names = "combined"; status = "disabled"; label= "I2C_3"; }; spi2: spi@40003800 { compatible = "st,stm32-spi"; #address-cells = <1>; #size-cells = <0>; reg = <0x40003800 0x400>; clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00004000>; interrupts = <26 3>; status = "disabled"; label = "SPI_2"; }; usb: usb@40005c00 { compatible = "st,stm32-usb"; reg = <0x40005c00 0x400>; interrupts = <31 0>; interrupt-names = "usb"; num-bidir-endpoints = <8>; ram-size = <1024>; phys = <&otgfs_phy>; clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00800000>; status = "disabled"; label= "USB"; }; }; otgfs_phy: otgfs_phy { compatible = "usb-nop-xceiv"; #phy-cells = <0>; label = "OTGFS_PHY"; }; };