/* * Copyright (c) 2020 IoT.bzh * * SPDX-License-Identifier: Apache-2.0 */ #define DT_DRV_COMPAT renesas_rcar_gpio #include #include #include #include #include #include #include #include #include typedef void (*init_func_t)(const struct device *dev); /* Required by DEVICE_MMIO_NAMED_* macros */ #define DEV_CFG(_dev) \ ((const struct gpio_rcar_cfg *)(_dev)->config) #define DEV_DATA(_dev) ((struct gpio_rcar_data *)(_dev)->data) struct gpio_rcar_cfg { struct gpio_driver_config common; DEVICE_MMIO_NAMED_ROM(reg_base); init_func_t init_func; const struct device *clock_dev; struct rcar_cpg_clk mod_clk; }; struct gpio_rcar_data { struct gpio_driver_data common; DEVICE_MMIO_NAMED_RAM(reg_base); sys_slist_t cb; }; #define IOINTSEL 0x00 /* General IO/Interrupt Switching Register */ #define INOUTSEL 0x04 /* General Input/Output Switching Register */ #define OUTDT 0x08 /* General Output Register */ #define INDT 0x0c /* General Input Register */ #define INTDT 0x10 /* Interrupt Display Register */ #define INTCLR 0x14 /* Interrupt Clear Register */ #define INTMSK 0x18 /* Interrupt Mask Register */ #define MSKCLR 0x1c /* Interrupt Mask Clear Register */ #define POSNEG 0x20 /* Positive/Negative Logic Select Register */ #define EDGLEVEL 0x24 /* Edge/level Select Register */ #define FILONOFF 0x28 /* Chattering Prevention On/Off Register */ #define OUTDTSEL 0x40 /* Output Data Select Register */ #define BOTHEDGE 0x4c /* One Edge/Both Edge Select Register */ static inline uint32_t gpio_rcar_read(const struct device *dev, uint32_t offs) { return sys_read32(DEVICE_MMIO_NAMED_GET(dev, reg_base) + offs); } static inline void gpio_rcar_write(const struct device *dev, uint32_t offs, uint32_t value) { sys_write32(value, DEVICE_MMIO_NAMED_GET(dev, reg_base) + offs); } static void gpio_rcar_modify_bit(const struct device *dev, uint32_t offs, int bit, bool value) { uint32_t tmp = gpio_rcar_read(dev, offs); if (value) { tmp |= BIT(bit); } else { tmp &= ~BIT(bit); } gpio_rcar_write(dev, offs, tmp); } static void gpio_rcar_port_isr(const struct device *dev) { struct gpio_rcar_data *data = dev->data; uint32_t pending, fsb, mask; pending = gpio_rcar_read(dev, INTDT); mask = gpio_rcar_read(dev, INTMSK); while ((pending = gpio_rcar_read(dev, INTDT) & gpio_rcar_read(dev, INTMSK))) { fsb = find_lsb_set(pending) - 1; gpio_fire_callbacks(&data->cb, dev, BIT(fsb)); gpio_rcar_write(dev, INTCLR, BIT(fsb)); } } static void gpio_rcar_config_general_input_output_mode( const struct device *dev, uint32_t gpio, bool output) { /* follow steps in the GPIO documentation for * "Setting General Output Mode" and * "Setting General Input Mode" */ /* Configure positive logic in POSNEG */ gpio_rcar_modify_bit(dev, POSNEG, gpio, false); /* Select "General Input/Output Mode" in IOINTSEL */ gpio_rcar_modify_bit(dev, IOINTSEL, gpio, false); /* Select Input Mode or Output Mode in INOUTSEL */ gpio_rcar_modify_bit(dev, INOUTSEL, gpio, output); /* Select General Output Register to output data in OUTDTSEL */ if (output) { gpio_rcar_modify_bit(dev, OUTDTSEL, gpio, false); } } static int gpio_rcar_configure(const struct device *dev, gpio_pin_t pin, gpio_flags_t flags) { if ((flags & GPIO_OUTPUT) && (flags & GPIO_INPUT)) { /* Pin cannot be configured as input and output */ return -ENOTSUP; } else if (!(flags & (GPIO_INPUT | GPIO_OUTPUT))) { /* Pin has to be configured as input or output */ return -ENOTSUP; } if (flags & GPIO_OUTPUT) { if (flags & GPIO_OUTPUT_INIT_HIGH) { gpio_rcar_modify_bit(dev, OUTDT, pin, true); } else if (flags & GPIO_OUTPUT_INIT_LOW) { gpio_rcar_modify_bit(dev, OUTDT, pin, false); } gpio_rcar_config_general_input_output_mode(dev, pin, true); } else { gpio_rcar_config_general_input_output_mode(dev, pin, false); } return 0; } static int gpio_rcar_port_get_raw(const struct device *dev, gpio_port_value_t *value) { *value = gpio_rcar_read(dev, INDT); return 0; } static int gpio_rcar_port_set_masked_raw(const struct device *dev, gpio_port_pins_t mask, gpio_port_value_t value) { uint32_t port_val; port_val = gpio_rcar_read(dev, OUTDT); port_val = (port_val & ~mask) | (value & mask); gpio_rcar_write(dev, OUTDT, port_val); return 0; } static int gpio_rcar_port_set_bits_raw(const struct device *dev, gpio_port_pins_t pins) { uint32_t port_val; port_val = gpio_rcar_read(dev, OUTDT); port_val |= pins; gpio_rcar_write(dev, OUTDT, port_val); return 0; } static int gpio_rcar_port_clear_bits_raw(const struct device *dev, gpio_port_pins_t pins) { uint32_t port_val; port_val = gpio_rcar_read(dev, OUTDT); port_val &= ~pins; gpio_rcar_write(dev, OUTDT, port_val); return 0; } static int gpio_rcar_port_toggle_bits(const struct device *dev, gpio_port_pins_t pins) { uint32_t port_val; port_val = gpio_rcar_read(dev, OUTDT); port_val ^= pins; gpio_rcar_write(dev, OUTDT, port_val); return 0; } static int gpio_rcar_pin_interrupt_configure(const struct device *dev, gpio_pin_t pin, enum gpio_int_mode mode, enum gpio_int_trig trig) { if (mode == GPIO_INT_MODE_DISABLED) { return -ENOTSUP; } /* Configure positive or negative logic in POSNEG */ gpio_rcar_modify_bit(dev, POSNEG, pin, (trig == GPIO_INT_TRIG_LOW)); /* Configure edge or level trigger in EDGLEVEL */ if (mode == GPIO_INT_MODE_EDGE) { gpio_rcar_modify_bit(dev, EDGLEVEL, pin, true); } else { gpio_rcar_modify_bit(dev, EDGLEVEL, pin, false); } if (trig == GPIO_INT_TRIG_BOTH) { gpio_rcar_modify_bit(dev, BOTHEDGE, pin, true); } gpio_rcar_modify_bit(dev, IOINTSEL, pin, true); if (mode == GPIO_INT_MODE_EDGE) { /* Write INTCLR in case of edge trigger */ gpio_rcar_write(dev, INTCLR, BIT(pin)); } gpio_rcar_write(dev, MSKCLR, BIT(pin)); return 0; } static int gpio_rcar_init(const struct device *dev) { const struct gpio_rcar_cfg *config = dev->config; int ret; if (!device_is_ready(config->clock_dev)) { return -ENODEV; } ret = clock_control_on(config->clock_dev, (clock_control_subsys_t) &config->mod_clk); if (ret < 0) { return ret; } DEVICE_MMIO_NAMED_MAP(dev, reg_base, K_MEM_CACHE_NONE); config->init_func(dev); return 0; } static int gpio_rcar_manage_callback(const struct device *dev, struct gpio_callback *callback, bool set) { struct gpio_rcar_data *data = dev->data; return gpio_manage_callback(&data->cb, callback, set); } static const struct gpio_driver_api gpio_rcar_driver_api = { .pin_configure = gpio_rcar_configure, .port_get_raw = gpio_rcar_port_get_raw, .port_set_masked_raw = gpio_rcar_port_set_masked_raw, .port_set_bits_raw = gpio_rcar_port_set_bits_raw, .port_clear_bits_raw = gpio_rcar_port_clear_bits_raw, .port_toggle_bits = gpio_rcar_port_toggle_bits, .pin_interrupt_configure = gpio_rcar_pin_interrupt_configure, .manage_callback = gpio_rcar_manage_callback, }; /* Device Instantiation */ #define GPIO_RCAR_INIT(n) \ static void gpio_rcar_##n##_init(const struct device *dev); \ static const struct gpio_rcar_cfg gpio_rcar_cfg_##n = { \ DEVICE_MMIO_NAMED_ROM_INIT(reg_base, DT_DRV_INST(n)), \ .common = { \ .port_pin_mask = \ GPIO_PORT_PIN_MASK_FROM_DT_INST(n), \ }, \ .init_func = gpio_rcar_##n##_init, \ .clock_dev = DEVICE_DT_GET(DT_INST_CLOCKS_CTLR(n)), \ .mod_clk.module = \ DT_INST_CLOCKS_CELL_BY_IDX(n, 0, module), \ .mod_clk.domain = \ DT_INST_CLOCKS_CELL_BY_IDX(n, 0, domain), \ }; \ static struct gpio_rcar_data gpio_rcar_data_##n; \ \ DEVICE_DT_INST_DEFINE(n, \ gpio_rcar_init, \ NULL, \ &gpio_rcar_data_##n, \ &gpio_rcar_cfg_##n, \ PRE_KERNEL_1, \ CONFIG_GPIO_INIT_PRIORITY, \ &gpio_rcar_driver_api \ ); \ static void gpio_rcar_##n##_init(const struct device *dev) \ { \ IRQ_CONNECT(DT_INST_IRQN(n), \ 0, \ gpio_rcar_port_isr, \ DEVICE_DT_INST_GET(n), 0); \ \ irq_enable(DT_INST_IRQN(n)); \ } DT_INST_FOREACH_STATUS_OKAY(GPIO_RCAR_INIT)