/* * Copyright (c) 2018 Nordic Semiconductor ASA * Copyright (c) 2017 Shawn Nock * Copyright (c) 2017 Linaro Limited * * SPDX-License-Identifier: Apache-2.0 */ /dts-v1/; #include / { model = "Nordic PCA10040 Dev Kit"; compatible = "nordic,pca10040-dk", "nordic,nrf52810-qfaa", "nordic,nrf52810"; chosen { zephyr,console = &uart0; zephyr,uart-mcumgr = &uart0; zephyr,sram = &sram0; zephyr,flash = &flash0; }; leds { compatible = "gpio-leds"; led0: led_0 { gpios = <&gpio0 17 GPIO_INT_ACTIVE_LOW>; label = "Green LED 0"; }; led1: led_1 { gpios = <&gpio0 18 GPIO_INT_ACTIVE_LOW>; label = "Green LED 1"; }; led2: led_2 { gpios = <&gpio0 19 GPIO_INT_ACTIVE_LOW>; label = "Green LED 2"; }; led3: led_3 { gpios = <&gpio0 20 GPIO_INT_ACTIVE_LOW>; label = "Green LED 3"; }; }; gpio_keys { compatible = "gpio-keys"; button0: button_0 { label = "Push button switch 0"; gpios = <&gpio0 13 GPIO_PUD_PULL_UP>; }; button1: button_1 { label = "Push button switch 1"; gpios = <&gpio0 14 GPIO_PUD_PULL_UP>; }; button2: button_2 { label = "Push button switch 2"; gpios = <&gpio0 15 GPIO_PUD_PULL_UP>; }; button3: button_3 { label = "Push button switch 3"; gpios = <&gpio0 16 GPIO_PUD_PULL_UP>; }; }; /* These aliases are provided for compatibility with samples */ aliases { led0 = &led0; led1 = &led1; led2 = &led2; led3 = &led3; sw0 = &button0; sw1 = &button1; sw2 = &button2; sw3 = &button3; }; }; &adc { status = "ok"; }; &gpiote { status ="ok"; }; &gpio0 { status ="ok"; }; &uart0 { status = "ok"; current-speed = <115200>; tx-pin = <6>; rx-pin = <8>; rts-pin = <5>; cts-pin = <7>; }; &i2c0 { status = "ok"; sda-pin = <26>; scl-pin = <27>; }; &spi0 { status = "ok"; sck-pin = <29>; mosi-pin = <31>; miso-pin = <30>; }; &flash0 { /* * For more information, see: * http://docs.zephyrproject.org/latest/devices/dts/flash_partitions.html */ partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; boot_partition: partition@0 { label = "mcuboot"; reg = <0x00000000 0xc000>; }; slot0_partition: partition@c000 { label = "image-0"; reg = <0x0000C000 0xd000>; }; slot1_partition: partition@19000 { label = "image-1"; reg = <0x00019000 0xd000>; }; scratch_partition: partition@26000 { label = "image-scratch"; reg = <0x00026000 0x3000>; }; #if defined(CONFIG_FS_FLASH_STORAGE_PARTITION) storage_partition: partition@29000 { label = "storage"; reg = <0x00029000 0x00007000>; }; #endif }; };