# Watchdog configuration options # Copyright (c) 2015 Intel Corporation # Copyright (c) 2017 Nordic Semiconductor ASA # SPDX-License-Identifier: Apache-2.0 menuconfig WATCHDOG bool "Watchdog Support" help Include support for watchdogs. if WATCHDOG config WDT_DISABLE_AT_BOOT bool "Disable at boot" help Disable watchdog at Zephyr system startup. module = WDT module-str = watchdog source "subsys/logging/Kconfig.template.log_config" config HAS_WDT_MULTISTAGE bool config WDT_MULTISTAGE bool "Multistage timeouts" depends on HAS_WDT_MULTISTAGE help Enable multistage operation of watchdog timeouts. config WDT_COUNTER bool "Counter based watchdog" def_bool $(dt_nodelabel_enabled,wdt_counter) select COUNTER help Watchdog emulated with counter device. If counter device supports using zero latency interrupts (ZLI) then expiration callback can be called from that context. This watchdog can be used along hardware watchdog to overcome hardware watchdog limitations, e.g. Nordic devices reset unconditionally at fixed time after hitting watchdog interrupt, leaving no time to print debug information. Watchdog has limitations since it cannot interrupt same or higher priorities so it cannot fully replace hardware based watchdog. if WDT_COUNTER config WDT_COUNTER_CH_COUNT int "Maximum number of supported channel" default 4 range 1 255 help Note that actual channel count will be limited to number of channels supported by the counter device which is used for watchdog. endif # WDT_COUNTER source "drivers/watchdog/Kconfig.stm32" source "drivers/watchdog/Kconfig.cmsdk_apb" source "drivers/watchdog/Kconfig.sam" source "drivers/watchdog/Kconfig.esp32" source "drivers/watchdog/Kconfig.sam0" source "drivers/watchdog/Kconfig.nrfx" source "drivers/watchdog/Kconfig.mcux" source "drivers/watchdog/Kconfig.mcux_imx" source "drivers/watchdog/Kconfig.xec" source "drivers/watchdog/Kconfig.gecko" source "drivers/watchdog/Kconfig.sifive" source "drivers/watchdog/Kconfig.npcx" source "drivers/watchdog/Kconfig.cc32xx" source "drivers/watchdog/Kconfig.it8xxx2" source "drivers/watchdog/Kconfig.rpi_pico" endif