# # Copyright 2022-2023 NXP # # SPDX-License-Identifier: Apache-2.0 # if(CONFIG_NXP_IMXRT_BOOT_HEADER) zephyr_library() if(NOT ((DEFINED CONFIG_BOARD_MIMXRT1170_EVK_MIMXRT1176_CM7) OR (DEFINED CONFIG_BOARD_MIMXRT1170_EVK_MIMXRT1176_CM4))) message(WARNING "It appears you are using the board definition for " "the MIMXRT1170-EVK, but targeting a custom board. You may need to " "update your flash configuration or device configuration data blocks") endif() if (${BOARD_REVISION} STREQUAL "A") set(RT1170_BOARD_NAME "evkmimxrt1170") elseif (${BOARD_REVISION} STREQUAL "B") set(RT1170_BOARD_NAME "evkbmimxrt1170") endif() set(RT1170_BOARD_DIR "${ZEPHYR_HAL_NXP_MODULE_DIR}/mcux/mcux-sdk/boards/${RT1170_BOARD_NAME}") if(CONFIG_BOOT_FLEXSPI_NOR) # Include flash configuration block for RT1170 EVK from NXP's HAL. # This configuration block may need modification if another flash chip is # used on your custom board. See NXP AN12238 for more information. zephyr_compile_definitions(XIP_BOOT_HEADER_ENABLE=1) zephyr_compile_definitions(BOARD_FLASH_SIZE=CONFIG_FLASH_SIZE*1024) zephyr_library_sources(${RT1170_BOARD_DIR}/xip/${RT1170_BOARD_NAME}_flexspi_nor_config.c) zephyr_library_include_directories(${RT1170_BOARD_DIR}/xip) endif() if(CONFIG_EXTERNAL_MEM_CONFIG_DATA) # Include external memory configuration data block for RT1170 EVK from NXP's HAL. # This configuration block may need modification if another SDRAM chip # is used on your custom board. zephyr_compile_definitions(XIP_BOOT_HEADER_XMCD_ENABLE=1) zephyr_library_sources(${RT1170_BOARD_DIR}/xmcd/xmcd.c) else() if(CONFIG_SRAM_BASE_ADDRESS EQUAL 0x80000000) message(WARNING "You are using SDRAM as RAM but no external memory" "configuration data (XMCD) is included. This configuration may not boot") endif() endif() endif() if(CONFIG_MCUX_GPT_TIMER) message(WARNING "You appear to be using the GPT hardware timer. " "This timer will enable lower power modes, but at the cost of reduced " "hardware timer resolution") endif()