/* * Copyright (c) 2020 Intel Corporation * * SPDX-License-Identifier: Apache-2.0 */ /dts-v1/; #include #include #include / { model = "black_f407ve board"; compatible = "black-stm32f407"; chosen { zephyr,console = &usart1; zephyr,shell-uart = &usart1; zephyr,sram = &sram0; zephyr,flash = &flash0; zephyr,ccm = &ccm0; zephyr,canbus = &can2; }; leds { compatible = "gpio-leds"; green_led_1: led_1 { gpios = <&gpioa 6 GPIO_ACTIVE_LOW>; label = "User LD1"; }; green_led_2: led_2 { gpios = <&gpioa 7 GPIO_ACTIVE_LOW>; label = "User LD2"; }; }; gpio_keys { compatible = "gpio-keys"; user_button_0: K0 { label = "Key K0"; gpios = <&gpioe 4 GPIO_ACTIVE_LOW>; zephyr,code = ; }; user_button_1: K1 { label = "Key K1"; gpios = <&gpioe 3 GPIO_ACTIVE_LOW>; zephyr,code = ; }; user_button_UP: K_UP { label = "Key WK_UP"; gpios = <&gpioa 0 GPIO_ACTIVE_HIGH>; zephyr,code = ; }; }; aliases { led0 = &green_led_1; led1 = &green_led_2; sw0 = &user_button_UP; }; }; &clk_lsi { status = "okay"; }; &clk_hse { clock-frequency = ; status = "okay"; }; &pll { div-m = <8>; mul-n = <336>; div-p = <2>; div-q = <7>; clocks = <&clk_hse>; status = "okay"; }; &rcc { clocks = <&pll>; clock-frequency = ; ahb-prescaler = <1>; apb1-prescaler = <4>; apb2-prescaler = <2>; }; &usart1 { pinctrl-0 = <&usart1_tx_pa9 &usart1_rx_pa10>; pinctrl-names = "default"; current-speed = <115200>; status = "okay"; }; &usart2 { pinctrl-0 = <&usart2_tx_pa2 &usart2_rx_pa3>; pinctrl-names = "default"; current-speed = <115200>; status = "okay"; }; &timers2 { status = "okay"; pwm2: pwm { status = "okay"; pinctrl-0 = <&tim2_ch1_pa0>; pinctrl-names = "default"; }; }; &rtc { clocks = <&rcc STM32_CLOCK_BUS_APB1 0x10000000>, <&rcc STM32_SRC_LSI RTC_SEL(2)>; status = "okay"; }; zephyr_udc0: &usbotg_fs { pinctrl-0 = <&usb_otg_fs_dm_pa11 &usb_otg_fs_dp_pa12>; pinctrl-names = "default"; status = "okay"; }; &can1 { pinctrl-0 = <&can1_rx_pd0 &can1_tx_pd1>; pinctrl-names = "default"; status = "disabled"; }; &can2 { pinctrl-0 = <&can2_rx_pb12 &can2_tx_pb13>; pinctrl-names = "default"; status = "okay"; }; &spi1 { pinctrl-0 = <&spi1_sck_pb3 &spi1_miso_pb4 &spi1_mosi_pb5>; pinctrl-names = "default"; status = "okay"; cs-gpios = <&gpiob 0 GPIO_ACTIVE_LOW>; w25q16cv: w25q16cv@0 { compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <40000000>; size = <0x1000000>; has-dpd; t-enter-dpd = <4000>; t-exit-dpd = <25000>; jedec-id = [ef 40 15]; }; }; &spi2 { pinctrl-0 = <&spi2_sck_pb10 &spi2_miso_pc2 &spi2_mosi_pc3>; pinctrl-names = "default"; status = "okay"; };