/* * PAN1770 EVB configuration * * Copyright (c) 2022 Panasonic Industrial Devices Europe GmbH * SPDX-License-Identifier: Apache-2.0 */ /dts-v1/; #include #include "pan1770_evb-pinctrl.dtsi" #include / { model = "pan1770-evb"; compatible = "panasonic-industrial-devices-europe-gmbh,pan1770-evb"; chosen { zephyr,console = &uart0; zephyr,shell-uart = &uart0; zephyr,uart-mcumgr = &uart0; zephyr,bt-mon-uart = &uart0; zephyr,bt-c2h-uart = &uart0; zephyr,sram = &sram0; zephyr,flash = &flash0; zephyr,code-partition = &slot0_partition; zephyr,ieee802154 = &ieee802154; }; leds { compatible = "gpio-leds"; evb_led1: evb_led_1 { gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; label = "LED1 on EVB"; }; evb_led2: evb_led_2 { gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; label = "LED2 on EVB"; }; evb_led3: evb_led_3 { gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; label = "LED3 on EVB"; }; evb_led4: evb_led_4 { gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; label = "LED4 on EVB"; }; }; pwmleds { compatible = "pwm-leds"; pwm_evb_led1: pwm_evb_led_1 { pwms = <&pwm0 0 PWM_MSEC(20) PWM_POLARITY_INVERTED>; }; }; buttons { compatible = "gpio-keys"; evb_sw1: evb_sw_1 { gpios = <&gpio0 11 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>; label = "SW1 on EVB"; zephyr,code = ; }; evb_sw2: evb_sw_2 { gpios = <&gpio0 12 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>; label = "SW2 on EVB"; zephyr,code = ; }; evb_sw3: evb_sw_3 { gpios = <&gpio0 24 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>; label = "SW3 on EVB"; zephyr,code = ; }; evb_sw4: evb_sw_4 { gpios = <&gpio0 25 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>; label = "SW4 on EVB"; zephyr,code = ; }; }; arduino_header: connector { compatible = "arduino-header-r3"; #gpio-cells = <2>; gpio-map-mask = <0xffffffff 0xffffffc0>; gpio-map-pass-thru = <0 0x3f>; gpio-map = <0 0 &gpio0 3 0>, /* A0 */ <1 0 &gpio0 4 0>, /* A1 */ <2 0 &gpio0 28 0>, /* A2 */ <3 0 &gpio0 29 0>, /* A3 */ <4 0 &gpio0 30 0>, /* A4 */ <5 0 &gpio0 31 0>, /* A5 */ <6 0 &gpio1 1 0>, /* D0 */ <7 0 &gpio1 2 0>, /* D1 */ <8 0 &gpio1 3 0>, /* D2 */ <9 0 &gpio1 4 0>, /* D3 */ <10 0 &gpio1 5 0>, /* D4 */ <11 0 &gpio1 6 0>, /* D5 */ <12 0 &gpio1 7 0>, /* D6 */ <13 0 &gpio1 8 0>, /* D7 */ <14 0 &gpio1 10 0>, /* D8 */ <15 0 &gpio1 11 0>, /* D9 */ <16 0 &gpio0 12 0>, /* D10 */ <17 0 &gpio0 13 0>, /* D11 */ <18 0 &gpio0 14 0>, /* D12 */ <19 0 &gpio0 15 0>, /* D13 */ <20 0 &gpio0 26 0>, /* D14 */ <21 0 &gpio0 27 0>; /* D15 */ }; arduino_adc: analog-connector { compatible = "arduino,uno-adc"; #io-channel-cells = <1>; io-channel-map = <0 &adc 1>, /* A0 = P0.3 = AIN1 */ <1 &adc 2>, /* A1 = P0.4 = AIN2 */ <2 &adc 4>, /* A2 = P0.28 = AIN4 */ <3 &adc 5>, /* A3 = P0.29 = AIN5 */ <4 &adc 6>, /* A4 = P0.30 = AIN6 */ <5 &adc 7>; /* A5 = P0.31 = AIN7 */ }; /* These aliases are provided for compatibility with samples */ aliases { led0 = &evb_led1; led1 = &evb_led2; led2 = &evb_led3; led3 = &evb_led4; pwm-led0 = &pwm_evb_led1; sw0 = &evb_sw1; sw1 = &evb_sw2; sw2 = &evb_sw3; sw3 = &evb_sw4; bootloader-led0 = &evb_led1; watchdog0 = &wdt0; }; }; &adc { status = "okay"; }; &uicr { gpio-as-nreset; }; &gpiote { status = "okay"; }; &gpio0 { status = "okay"; }; &gpio1 { status = "okay"; }; &uart0 { compatible = "nordic,nrf-uarte"; status = "okay"; current-speed = <115200>; pinctrl-0 = <&uart0_default>; pinctrl-1 = <&uart0_sleep>; pinctrl-names = "default", "sleep"; }; arduino_serial: &uart1 { status = "okay"; current-speed = <115200>; pinctrl-0 = <&uart1_default>; pinctrl-1 = <&uart1_sleep>; pinctrl-names = "default", "sleep"; }; arduino_i2c: &i2c0 { compatible = "nordic,nrf-twi"; status = "okay"; pinctrl-0 = <&i2c0_default>; pinctrl-1 = <&i2c0_sleep>; pinctrl-names = "default", "sleep"; }; &i2c1 { compatible = "nordic,nrf-twi"; /* Cannot be used together with spi1, so disabled by default. */ pinctrl-0 = <&i2c1_default>; pinctrl-1 = <&i2c1_sleep>; pinctrl-names = "default", "sleep"; }; &pwm0 { status = "okay"; pinctrl-0 = <&pwm0_default>; pinctrl-1 = <&pwm0_sleep>; pinctrl-names = "default", "sleep"; }; &spi0 { compatible = "nordic,nrf-spi"; /* Cannot be used together with i2c0, so disabled by default. */ pinctrl-0 = <&spi0_default>; pinctrl-1 = <&spi0_sleep>; pinctrl-names = "default", "sleep"; }; &spi1 { compatible = "nordic,nrf-spi"; status = "okay"; pinctrl-0 = <&spi1_default>; pinctrl-1 = <&spi1_sleep>; pinctrl-names = "default", "sleep"; }; &spi2 { compatible = "nordic,nrf-spi"; /* Disabled by default in nrf52840.dtsi. */ pinctrl-0 = <&spi2_default>; pinctrl-1 = <&spi2_sleep>; pinctrl-names = "default", "sleep"; }; &qspi { /* Disabled by default in nrf52840.dtsi. */ pinctrl-0 = <&qspi_default>; pinctrl-1 = <&qspi_sleep>; pinctrl-names = "default", "sleep"; }; arduino_spi: &spi3 { status = "disabled"; /* Cannot be used together with evb_led1, evb_led2, evb_led3, evb_sw2 * and pwm0 so disabled by default. */ cs-gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; /* D10 */ pinctrl-0 = <&spi3_default>; pinctrl-1 = <&spi3_sleep>; pinctrl-names = "default", "sleep"; }; &ieee802154 { status = "okay"; }; &flash0 { partitions { compatible = "fixed-partitions"; #address-cells = <1>; #size-cells = <1>; boot_partition: partition@0 { label = "mcuboot"; reg = <0x000000000 0x0000C000>; }; slot0_partition: partition@c000 { label = "image-0"; reg = <0x0000C000 0x00067000>; }; slot1_partition: partition@73000 { label = "image-1"; reg = <0x00073000 0x00067000>; }; scratch_partition: partition@da000 { label = "image-scratch"; reg = <0x000da000 0x0001e000>; }; storage_partition: partition@f8000 { label = "storage"; reg = <0x000f8000 0x00008000>; }; }; }; zephyr_udc0: &usbd { compatible = "nordic,nrf-usbd"; status = "okay"; };