/*
 * Copyright (c) Bobby Noelte
 *
 * SPDX-License-Identifier: Apache-2.0
 */

#include <st/f0/stm32f071.dtsi>

/ {
	soc {
		compatible = "st,stm32f091", "st,stm32f0", "simple-bus";

		/*
		 * USARTs 3-8 share the same IRQ on stm32f091xx devices. This
		 * configuration is not currently supported, so at most one of
		 * these may be enabled at a time. Enabling more than one will
		 * result in a build failure.
		 */
		usart5: serial@40005000 {
			compatible = "st,stm32-usart", "st,stm32-uart";
			reg = <0x40005000 0x400>;
			clocks = <&rcc STM32_CLOCK_BUS_APB1 0x00100000>;
			resets = <&rctl STM32_RESET(APB1, 20U)>;
			interrupts = <29 0>;
			status = "disabled";
		};

		usart6: serial@40011400 {
			compatible = "st,stm32-usart", "st,stm32-uart";
			reg = <0x40011400 0x400>;
			clocks = <&rcc STM32_CLOCK_BUS_APB2 0x00000020>;
			resets = <&rctl STM32_RESET(APB2, 5U)>;
			interrupts = <29 0>;
			status = "disabled";
		};

		usart7: serial@40011800 {
			compatible = "st,stm32-usart", "st,stm32-uart";
			reg = <0x40011800 0x400>;
			clocks = <&rcc STM32_CLOCK_BUS_APB2 0x00000040>;
			resets = <&rctl STM32_RESET(APB2, 6U)>;
			interrupts = <29 0>;
			status = "disabled";
		};

		usart8: serial@40011c00 {
			compatible = "st,stm32-usart", "st,stm32-uart";
			reg = <0x40011c00 0x400>;
			clocks = <&rcc STM32_CLOCK_BUS_APB2 0x00000080>;
			resets = <&rctl STM32_RESET(APB2, 7U)>;
			interrupts = <29 0>;
			status = "disabled";
		};

		can1: can@40006400 {
			compatible = "st,stm32-bxcan";
			reg = <0x40006400 0x400>;
			interrupts = <30 0>;
			clocks = <&rcc STM32_CLOCK_BUS_APB1 0x02000000>;
			status = "disabled";
		};

		dma2: dma@40020400 {
			compatible = "st,stm32-dma-v2bis";
			#dma-cells = <2>;
			reg = <0x40020400 0x400>;
			interrupts = <10 0 10 0 11 0 11 0 11 0>;
			clocks = <&rcc STM32_CLOCK_BUS_AHB1 0x2>;
			status = "disabled";
		};
	};
};