/* * Copyright (c) 2021 Antmicro * * SPDX-License-Identifier: Apache-2.0 */ #define DT_DRV_COMPAT ovti_ov2640 #include #include #include #include #include #include #include LOG_MODULE_REGISTER(video_ov2640, CONFIG_VIDEO_LOG_LEVEL); /* DSP register bank FF=0x00*/ #define QS 0x44 #define HSIZE 0x51 #define VSIZE 0x52 #define XOFFL 0x53 #define YOFFL 0x54 #define VHYX 0x55 #define TEST 0x57 #define ZMOW 0x5A #define ZMOH 0x5B #define ZMHH 0x5C #define BPADDR 0x7C #define BPDATA 0x7D #define SIZEL 0x8C #define HSIZE8 0xC0 #define VSIZE8 0xC1 #define CTRL1 0xC3 #define CTRLI 0x50 #define CTRLI_LP_DP 0x80 #define CTRL0 0xC2 #define CTRL0_YUV422 0x08 #define CTRL0_YUV_EN 0x04 #define CTRL0_RGB_EN 0x02 #define CTRL2 0x86 #define CTRL2_DCW_EN 0x20 #define CTRL2_SDE_EN 0x10 #define CTRL2_UV_ADJ_EN 0x08 #define CTRL2_UV_AVG_EN 0x04 #define CTRL2_CMX_EN 0x01 #define CTRL3 0x87 #define CTRL3_BPC_EN 0x80 #define CTRL3_WPC_EN 0x40 #define R_DVP_SP 0xD3 #define R_DVP_SP_AUTO_MODE 0x80 #define R_BYPASS 0x05 #define R_BYPASS_DSP_EN 0x00 #define R_BYPASS_DSP_BYPAS 0x01 #define IMAGE_MODE 0xDA #define IMAGE_MODE_JPEG_EN 0x10 #define IMAGE_MODE_RGB565 0x08 #define RESET 0xE0 #define RESET_JPEG 0x10 #define RESET_DVP 0x04 #define MC_BIST 0xF9 #define MC_BIST_RESET 0x80 #define MC_BIST_BOOT_ROM_SEL 0x40 #define BANK_SEL 0xFF #define BANK_SEL_DSP 0x00 #define BANK_SEL_SENSOR 0x01 /* Sensor register bank FF=0x01*/ #define COM1 0x03 #define REG_PID 0x0A #define REG_PID_VAL 0x26 #define REG_VER 0x0B #define REG_VER_VAL 0x42 #define AEC 0x10 #define CLKRC 0x11 #define COM10 0x15 #define HSTART 0x17 #define HSTOP 0x18 #define VSTART 0x19 #define VSTOP 0x1A #define AEW 0x24 #define AEB 0x25 #define ARCOM2 0x34 #define FLL 0x46 #define FLH 0x47 #define COM19 0x48 #define ZOOMS 0x49 #define BD50 0x4F #define BD60 0x50 #define REG5D 0x5D #define REG5E 0x5E #define REG5F 0x5F #define REG60 0x60 #define HISTO_LOW 0x61 #define HISTO_HIGH 0x62 #define REG04 0x04 #define REG04_DEFAULT 0x28 #define REG04_HFLIP_IMG 0x80 #define REG04_VFLIP_IMG 0x40 #define REG04_VREF_EN 0x10 #define REG04_HREF_EN 0x08 #define REG04_SET(x) (REG04_DEFAULT | x) #define COM2 0x09 #define COM2_OUT_DRIVE_3x 0x02 #define COM3 0x0C #define COM3_DEFAULT 0x38 #define COM3_BAND_AUTO 0x02 #define COM3_BAND_SET(x) (COM3_DEFAULT | x) #define COM7 0x12 #define COM7_SRST 0x80 #define COM7_RES_UXGA 0x00 /* UXGA */ #define COM7_ZOOM_EN 0x04 /* Enable Zoom */ #define COM7_COLOR_BAR 0x02 /* Enable Color Bar Test */ #define COM8 0x13 #define COM8_DEFAULT 0xC0 #define COM8_BNDF_EN 0x20 /* Enable Banding filter */ #define COM8_AGC_EN 0x04 /* AGC Auto/Manual control selection */ #define COM8_AEC_EN 0x01 /* Auto/Manual Exposure control */ #define COM8_SET(x) (COM8_DEFAULT | x) #define COM9 0x14 /* AGC gain ceiling */ #define COM9_DEFAULT 0x08 #define COM9_AGC_GAIN_8x 0x02 /* AGC: 8x */ #define COM9_AGC_SET(x) (COM9_DEFAULT | (x << 5)) #define COM10 0x15 #define CTRL1_AWB 0x08 /* Enable AWB */ #define VV 0x26 #define VV_AGC_TH_SET(h, l) ((h << 4) | (l & 0x0F)) #define REG32 0x32 #define REG32_UXGA 0x36 /* Configuration arrays */ #define SVGA_HSIZE (800) #define SVGA_VSIZE (600) #define UXGA_HSIZE (1600) #define UXGA_VSIZE (1200) struct ov2640_reg { uint8_t addr; uint8_t value; }; static const struct ov2640_reg default_regs[] = { { BANK_SEL, BANK_SEL_DSP }, { 0x2c, 0xff }, { 0x2e, 0xdf }, { BANK_SEL, BANK_SEL_SENSOR }, { 0x3c, 0x32 }, { CLKRC, 0x80 }, /* Set PCLK divider */ { COM2, COM2_OUT_DRIVE_3x }, /* Output drive x2 */ { REG04, REG04_SET(REG04_HREF_EN)}, { COM8, COM8_SET(COM8_BNDF_EN | COM8_AGC_EN | COM8_AEC_EN) }, { COM9, COM9_AGC_SET(COM9_AGC_GAIN_8x)}, { COM10, 0x00 }, /* Invert VSYNC */ { 0x2c, 0x0c }, { 0x33, 0x78 }, { 0x3a, 0x33 }, { 0x3b, 0xfb }, { 0x3e, 0x00 }, { 0x43, 0x11 }, { 0x16, 0x10 }, { 0x39, 0x02 }, { 0x35, 0x88 }, { 0x22, 0x0a }, { 0x37, 0x40 }, { 0x23, 0x00 }, { ARCOM2, 0xa0 }, { 0x06, 0x02 }, { 0x06, 0x88 }, { 0x07, 0xc0 }, { 0x0d, 0xb7 }, { 0x0e, 0x01 }, { 0x4c, 0x00 }, { 0x4a, 0x81 }, { 0x21, 0x99 }, { AEW, 0x40 }, { AEB, 0x38 }, /* AGC/AEC fast mode operating region */ { VV, VV_AGC_TH_SET(0x08, 0x02) }, { COM19, 0x00 }, /* Zoom control 2 LSBs */ { ZOOMS, 0x00 }, /* Zoom control 8 MSBs */ { 0x5c, 0x00 }, { 0x63, 0x00 }, { FLL, 0x00 }, { FLH, 0x00 }, /* Set banding filter */ { COM3, COM3_BAND_SET(COM3_BAND_AUTO) }, { REG5D, 0x55 }, { REG5E, 0x7d }, { REG5F, 0x7d }, { REG60, 0x55 }, { HISTO_LOW, 0x70 }, { HISTO_HIGH, 0x80 }, { 0x7c, 0x05 }, { 0x20, 0x80 }, { 0x28, 0x30 }, { 0x6c, 0x00 }, { 0x6d, 0x80 }, { 0x6e, 0x00 }, { 0x70, 0x02 }, { 0x71, 0x94 }, { 0x73, 0xc1 }, { 0x3d, 0x34 }, /* { COM7, COM7_RES_UXGA | COM7_ZOOM_EN }, */ { 0x5a, 0x57 }, { BD50, 0xbb }, { BD60, 0x9c }, { BANK_SEL, BANK_SEL_DSP }, { 0xe5, 0x7f }, { MC_BIST, MC_BIST_RESET | MC_BIST_BOOT_ROM_SEL }, { 0x41, 0x24 }, { RESET, RESET_JPEG | RESET_DVP }, { 0x76, 0xff }, { 0x33, 0xa0 }, { 0x42, 0x20 }, { 0x43, 0x18 }, { 0x4c, 0x00 }, { CTRL3, CTRL3_BPC_EN | CTRL3_WPC_EN | 0x10 }, { 0x88, 0x3f }, { 0xd7, 0x03 }, { 0xd9, 0x10 }, { R_DVP_SP, R_DVP_SP_AUTO_MODE | 0x2 }, { 0xc8, 0x08 }, { 0xc9, 0x80 }, { BPADDR, 0x00 }, { BPDATA, 0x00 }, { BPADDR, 0x03 }, { BPDATA, 0x48 }, { BPDATA, 0x48 }, { BPADDR, 0x08 }, { BPDATA, 0x20 }, { BPDATA, 0x10 }, { BPDATA, 0x0e }, { 0x90, 0x00 }, { 0x91, 0x0e }, { 0x91, 0x1a }, { 0x91, 0x31 }, { 0x91, 0x5a }, { 0x91, 0x69 }, { 0x91, 0x75 }, { 0x91, 0x7e }, { 0x91, 0x88 }, { 0x91, 0x8f }, { 0x91, 0x96 }, { 0x91, 0xa3 }, { 0x91, 0xaf }, { 0x91, 0xc4 }, { 0x91, 0xd7 }, { 0x91, 0xe8 }, { 0x91, 0x20 }, { 0x92, 0x00 }, { 0x93, 0x06 }, { 0x93, 0xe3 }, { 0x93, 0x03 }, { 0x93, 0x03 }, { 0x93, 0x00 }, { 0x93, 0x02 }, { 0x93, 0x00 }, { 0x93, 0x00 }, { 0x93, 0x00 }, { 0x93, 0x00 }, { 0x93, 0x00 }, { 0x93, 0x00 }, { 0x93, 0x00 }, { 0x96, 0x00 }, { 0x97, 0x08 }, { 0x97, 0x19 }, { 0x97, 0x02 }, { 0x97, 0x0c }, { 0x97, 0x24 }, { 0x97, 0x30 }, { 0x97, 0x28 }, { 0x97, 0x26 }, { 0x97, 0x02 }, { 0x97, 0x98 }, { 0x97, 0x80 }, { 0x97, 0x00 }, { 0x97, 0x00 }, { 0xa4, 0x00 }, { 0xa8, 0x00 }, { 0xc5, 0x11 }, { 0xc6, 0x51 }, { 0xbf, 0x80 }, { 0xc7, 0x10 }, { 0xb6, 0x66 }, { 0xb8, 0xA5 }, { 0xb7, 0x64 }, { 0xb9, 0x7C }, { 0xb3, 0xaf }, { 0xb4, 0x97 }, { 0xb5, 0xFF }, { 0xb0, 0xC5 }, { 0xb1, 0x94 }, { 0xb2, 0x0f }, { 0xc4, 0x5c }, { 0xa6, 0x00 }, { 0xa7, 0x20 }, { 0xa7, 0xd8 }, { 0xa7, 0x1b }, { 0xa7, 0x31 }, { 0xa7, 0x00 }, { 0xa7, 0x18 }, { 0xa7, 0x20 }, { 0xa7, 0xd8 }, { 0xa7, 0x19 }, { 0xa7, 0x31 }, { 0xa7, 0x00 }, { 0xa7, 0x18 }, { 0xa7, 0x20 }, { 0xa7, 0xd8 }, { 0xa7, 0x19 }, { 0xa7, 0x31 }, { 0xa7, 0x00 }, { 0xa7, 0x18 }, { 0x7f, 0x00 }, { 0xe5, 0x1f }, { 0xe1, 0x77 }, { 0xdd, 0x7f }, { CTRL0, CTRL0_YUV422 | CTRL0_YUV_EN | CTRL0_RGB_EN }, { 0x00, 0x00 } }; static const struct ov2640_reg uxga_regs[] = { { BANK_SEL, BANK_SEL_SENSOR }, /* DSP input image resolution and window size control */ { COM7, COM7_RES_UXGA}, { COM1, 0x0F }, /* UXGA=0x0F, SVGA=0x0A, CIF=0x06 */ { REG32, REG32_UXGA }, /* UXGA=0x36, SVGA/CIF=0x09 */ { HSTART, 0x11 }, /* UXGA=0x11, SVGA/CIF=0x11 */ { HSTOP, 0x75 }, /* UXGA=0x75, SVGA/CIF=0x43 */ { VSTART, 0x01 }, /* UXGA=0x01, SVGA/CIF=0x00 */ { VSTOP, 0x97 }, /* UXGA=0x97, SVGA/CIF=0x4b */ { 0x3d, 0x34 }, /* UXGA=0x34, SVGA/CIF=0x38 */ { 0x35, 0x88 }, { 0x22, 0x0a }, { 0x37, 0x40 }, { 0x34, 0xa0 }, { 0x06, 0x02 }, { 0x0d, 0xb7 }, { 0x0e, 0x01 }, { 0x42, 0x83 }, /* * Set DSP input image size and offset. * The sensor output image can be scaled with OUTW/OUTH */ { BANK_SEL, BANK_SEL_DSP }, { R_BYPASS, R_BYPASS_DSP_BYPAS }, { RESET, RESET_DVP }, { HSIZE8, (UXGA_HSIZE>>3)}, /* Image Horizontal Size HSIZE[10:3] */ { VSIZE8, (UXGA_VSIZE>>3)}, /* Image Vertical Size VSIZE[10:3] */ /* {HSIZE[11], HSIZE[2:0], VSIZE[2:0]} */ { SIZEL, ((UXGA_HSIZE>>6)&0x40) | ((UXGA_HSIZE&0x7)<<3) | (UXGA_VSIZE&0x7)}, { XOFFL, 0x00 }, /* OFFSET_X[7:0] */ { YOFFL, 0x00 }, /* OFFSET_Y[7:0] */ { HSIZE, ((UXGA_HSIZE>>2)&0xFF) }, /* H_SIZE[7:0] real/4 */ { VSIZE, ((UXGA_VSIZE>>2)&0xFF) }, /* V_SIZE[7:0] real/4 */ /* V_SIZE[8]/OFFSET_Y[10:8]/H_SIZE[8]/OFFSET_X[10:8] */ { VHYX, ((UXGA_VSIZE>>3)&0x80) | ((UXGA_HSIZE>>7)&0x08) }, { TEST, (UXGA_HSIZE>>4)&0x80}, /* H_SIZE[9] */ { CTRL2, CTRL2_DCW_EN | CTRL2_SDE_EN | CTRL2_UV_AVG_EN | CTRL2_CMX_EN | CTRL2_UV_ADJ_EN }, /* H_DIVIDER/V_DIVIDER */ { CTRLI, CTRLI_LP_DP | 0x00}, /* DVP prescaler */ { R_DVP_SP, R_DVP_SP_AUTO_MODE | 0x04}, { R_BYPASS, R_BYPASS_DSP_EN }, { RESET, 0x00 }, {0, 0}, }; #define NUM_BRIGHTNESS_LEVELS (5) static const uint8_t brightness_regs[NUM_BRIGHTNESS_LEVELS + 1][5] = { { BPADDR, BPDATA, BPADDR, BPDATA, BPDATA }, { 0x00, 0x04, 0x09, 0x00, 0x00 }, /* -2 */ { 0x00, 0x04, 0x09, 0x10, 0x00 }, /* -1 */ { 0x00, 0x04, 0x09, 0x20, 0x00 }, /* 0 */ { 0x00, 0x04, 0x09, 0x30, 0x00 }, /* +1 */ { 0x00, 0x04, 0x09, 0x40, 0x00 }, /* +2 */ }; #define NUM_CONTRAST_LEVELS (5) static const uint8_t contrast_regs[NUM_CONTRAST_LEVELS + 1][7] = { { BPADDR, BPDATA, BPADDR, BPDATA, BPDATA, BPDATA, BPDATA }, { 0x00, 0x04, 0x07, 0x20, 0x18, 0x34, 0x06 }, /* -2 */ { 0x00, 0x04, 0x07, 0x20, 0x1c, 0x2a, 0x06 }, /* -1 */ { 0x00, 0x04, 0x07, 0x20, 0x20, 0x20, 0x06 }, /* 0 */ { 0x00, 0x04, 0x07, 0x20, 0x24, 0x16, 0x06 }, /* +1 */ { 0x00, 0x04, 0x07, 0x20, 0x28, 0x0c, 0x06 }, /* +2 */ }; #define NUM_SATURATION_LEVELS (5) static const uint8_t saturation_regs[NUM_SATURATION_LEVELS + 1][5] = { { BPADDR, BPDATA, BPADDR, BPDATA, BPDATA }, { 0x00, 0x02, 0x03, 0x28, 0x28 }, /* -2 */ { 0x00, 0x02, 0x03, 0x38, 0x38 }, /* -1 */ { 0x00, 0x02, 0x03, 0x48, 0x48 }, /* 0 */ { 0x00, 0x02, 0x03, 0x58, 0x58 }, /* +1 */ { 0x00, 0x02, 0x03, 0x58, 0x58 }, /* +2 */ }; struct ov2640_config { struct i2c_dt_spec i2c; #if DT_INST_NODE_HAS_PROP(0, reset_gpios) struct gpio_dt_spec reset_gpio; #endif uint8_t clock_rate_control; }; struct ov2640_data { struct video_format fmt; }; #define OV2640_VIDEO_FORMAT_CAP(width, height, format) \ { \ .pixelformat = (format), \ .width_min = (width), \ .width_max = (width), \ .height_min = (height), \ .height_max = (height), \ .width_step = 0, \ .height_step = 0 \ } static const struct video_format_cap fmts[] = { OV2640_VIDEO_FORMAT_CAP(160, 120, VIDEO_PIX_FMT_RGB565), /* QQVGA */ OV2640_VIDEO_FORMAT_CAP(176, 144, VIDEO_PIX_FMT_RGB565), /* QCIF */ OV2640_VIDEO_FORMAT_CAP(240, 160, VIDEO_PIX_FMT_RGB565), /* HQVGA */ OV2640_VIDEO_FORMAT_CAP(240, 240, VIDEO_PIX_FMT_RGB565), /* 240x240 */ OV2640_VIDEO_FORMAT_CAP(320, 240, VIDEO_PIX_FMT_RGB565), /* QVGA */ OV2640_VIDEO_FORMAT_CAP(352, 288, VIDEO_PIX_FMT_RGB565), /* CIF */ OV2640_VIDEO_FORMAT_CAP(640, 480, VIDEO_PIX_FMT_RGB565), /* VGA */ OV2640_VIDEO_FORMAT_CAP(800, 600, VIDEO_PIX_FMT_RGB565), /* SVGA */ OV2640_VIDEO_FORMAT_CAP(1024, 768, VIDEO_PIX_FMT_RGB565), /* XVGA */ OV2640_VIDEO_FORMAT_CAP(1280, 1024, VIDEO_PIX_FMT_RGB565), /* SXGA */ OV2640_VIDEO_FORMAT_CAP(1600, 1200, VIDEO_PIX_FMT_RGB565), /* UXGA */ OV2640_VIDEO_FORMAT_CAP(160, 120, VIDEO_PIX_FMT_JPEG), /* QQVGA */ OV2640_VIDEO_FORMAT_CAP(176, 144, VIDEO_PIX_FMT_JPEG), /* QCIF */ OV2640_VIDEO_FORMAT_CAP(240, 160, VIDEO_PIX_FMT_JPEG), /* HQVGA */ OV2640_VIDEO_FORMAT_CAP(320, 240, VIDEO_PIX_FMT_JPEG), /* QVGA */ OV2640_VIDEO_FORMAT_CAP(352, 288, VIDEO_PIX_FMT_JPEG), /* CIF */ OV2640_VIDEO_FORMAT_CAP(640, 480, VIDEO_PIX_FMT_JPEG), /* VGA */ OV2640_VIDEO_FORMAT_CAP(800, 600, VIDEO_PIX_FMT_JPEG), /* SVGA */ OV2640_VIDEO_FORMAT_CAP(1024, 768, VIDEO_PIX_FMT_JPEG), /* XVGA */ OV2640_VIDEO_FORMAT_CAP(1280, 1024, VIDEO_PIX_FMT_JPEG), /* SXGA */ OV2640_VIDEO_FORMAT_CAP(1600, 1200, VIDEO_PIX_FMT_JPEG), /* UXGA */ { 0 } }; static int ov2640_write_reg(const struct i2c_dt_spec *spec, uint8_t reg_addr, uint8_t value) { uint8_t tries = 3; /** * It rarely happens that the camera does not respond with ACK signal. * In that case it usually responds on 2nd try but there is a 3rd one * just to be sure that the connection error is not caused by driver * itself. */ while (tries--) { if (!i2c_reg_write_byte_dt(spec, reg_addr, value)) { return 0; } /* If writing failed wait 5ms before next attempt */ k_msleep(5); } LOG_ERR("failed to write 0x%x to 0x%x", value, reg_addr); return -1; } static int ov2640_read_reg(const struct i2c_dt_spec *spec, uint8_t reg_addr) { uint8_t tries = 3; uint8_t value; /** * It rarely happens that the camera does not respond with ACK signal. * In that case it usually responds on 2nd try but there is a 3rd one * just to be sure that the connection error is not caused by driver * itself. */ while (tries--) { if (!i2c_reg_read_byte_dt(spec, reg_addr, &value)) { return value; } /* If reading failed wait 5ms before next attempt */ k_msleep(5); } LOG_ERR("failed to read 0x%x register", reg_addr); return -1; } static int ov2640_write_all(const struct device *dev, const struct ov2640_reg *regs, uint16_t reg_num) { uint16_t i = 0; const struct ov2640_config *cfg = dev->config; for (i = 0; i < reg_num; i++) { int err; err = ov2640_write_reg(&cfg->i2c, regs[i].addr, regs[i].value); if (err) { return err; } } return 0; } static int ov2640_soft_reset(const struct device *dev) { int ret = 0; const struct ov2640_config *cfg = dev->config; /* Switch to DSP register bank */ ret |= ov2640_write_reg(&cfg->i2c, BANK_SEL, BANK_SEL_SENSOR); /* Initiate system reset */ ret |= ov2640_write_reg(&cfg->i2c, COM7, COM7_SRST); return ret; } static int ov2640_set_level(const struct device *dev, int level, int max_level, int cols, const uint8_t regs[][cols]) { int ret = 0; const struct ov2640_config *cfg = dev->config; level += (max_level / 2 + 1); if (level < 0 || level > max_level) { return -ENOTSUP; } /* Switch to DSP register bank */ ret |= ov2640_write_reg(&cfg->i2c, BANK_SEL, BANK_SEL_DSP); for (int i = 0; i < (ARRAY_SIZE(regs[0]) / sizeof(regs[0][0])); i++) { ret |= ov2640_write_reg(&cfg->i2c, regs[0][i], regs[level][i]); } return ret; } static int ov2640_set_brightness(const struct device *dev, int level) { int ret = 0; ret = ov2640_set_level(dev, level, NUM_BRIGHTNESS_LEVELS, ARRAY_SIZE(brightness_regs[0]), brightness_regs); if (ret == -ENOTSUP) { LOG_ERR("Brightness level %d not supported", level); } return ret; } static int ov2640_set_saturation(const struct device *dev, int level) { int ret = 0; ret = ov2640_set_level(dev, level, NUM_SATURATION_LEVELS, ARRAY_SIZE(saturation_regs[0]), saturation_regs); if (ret == -ENOTSUP) { LOG_ERR("Saturation level %d not supported", level); } return ret; } static int ov2640_set_contrast(const struct device *dev, int level) { int ret = 0; ret = ov2640_set_level(dev, level, NUM_CONTRAST_LEVELS, ARRAY_SIZE(contrast_regs[0]), contrast_regs); if (ret == -ENOTSUP) { LOG_ERR("Contrast level %d not supported", level); } return ret; } static int ov2640_set_output_format(const struct device *dev, int output_format) { int ret = 0; const struct ov2640_config *cfg = dev->config; /* Switch to DSP register bank */ ret |= ov2640_write_reg(&cfg->i2c, BANK_SEL, BANK_SEL_DSP); if (output_format == VIDEO_PIX_FMT_JPEG) { /* Enable JPEG compression */ ret |= ov2640_write_reg(&cfg->i2c, IMAGE_MODE, IMAGE_MODE_JPEG_EN); } else if (output_format == VIDEO_PIX_FMT_RGB565) { /* Disable JPEG compression and set output to RGB565 */ ret |= ov2640_write_reg(&cfg->i2c, IMAGE_MODE, IMAGE_MODE_RGB565); } else { LOG_ERR("Image format not supported"); return -ENOTSUP; } k_msleep(30); return ret; } static int ov2640_set_quality(const struct device *dev, int qs) { int ret = 0; const struct ov2640_config *cfg = dev->config; /* Switch to DSP register bank */ ret |= ov2640_write_reg(&cfg->i2c, BANK_SEL, BANK_SEL_DSP); /* Write QS register */ ret |= ov2640_write_reg(&cfg->i2c, QS, qs); return ret; } static int ov2640_set_colorbar(const struct device *dev, uint8_t enable) { int ret = 0; const struct ov2640_config *cfg = dev->config; uint8_t reg; /* Switch to SENSOR register bank */ ret |= ov2640_write_reg(&cfg->i2c, BANK_SEL, BANK_SEL_SENSOR); /* Update COM7 to enable/disable color bar test pattern */ reg = ov2640_read_reg(&cfg->i2c, COM7); if (enable) { reg |= COM7_COLOR_BAR; } else { reg &= ~COM7_COLOR_BAR; } ret |= ov2640_write_reg(&cfg->i2c, COM7, reg); return ret; } static int ov2640_set_white_bal(const struct device *dev, int enable) { int ret = 0; const struct ov2640_config *cfg = dev->config; uint8_t reg; /* Switch to SENSOR register bank */ ret |= ov2640_write_reg(&cfg->i2c, BANK_SEL, BANK_SEL_SENSOR); /* Update CTRL1 to enable/disable automatic white balance*/ reg = ov2640_read_reg(&cfg->i2c, CTRL1); if (enable) { reg |= CTRL1_AWB; } else { reg &= ~CTRL1_AWB; } ret |= ov2640_write_reg(&cfg->i2c, CTRL1, reg); return ret; } static int ov2640_set_gain_ctrl(const struct device *dev, int enable) { int ret = 0; const struct ov2640_config *cfg = dev->config; uint8_t reg; /* Switch to SENSOR register bank */ ret |= ov2640_write_reg(&cfg->i2c, BANK_SEL, BANK_SEL_SENSOR); /* Update COM8 to enable/disable automatic gain control */ reg = ov2640_read_reg(&cfg->i2c, COM8); if (enable) { reg |= COM8_AGC_EN; } else { reg &= ~COM8_AGC_EN; } ret |= ov2640_write_reg(&cfg->i2c, COM8, reg); return ret; } static int ov2640_set_exposure_ctrl(const struct device *dev, int enable) { int ret = 0; const struct ov2640_config *cfg = dev->config; uint8_t reg; /* Switch to SENSOR register bank */ ret |= ov2640_write_reg(&cfg->i2c, BANK_SEL, BANK_SEL_SENSOR); /* Update COM8 to enable/disable automatic exposure control */ reg = ov2640_read_reg(&cfg->i2c, COM8); if (enable) { reg |= COM8_AEC_EN; } else { reg &= ~COM8_AEC_EN; } ret |= ov2640_write_reg(&cfg->i2c, COM8, reg); return ret; } static int ov2640_set_horizontal_mirror(const struct device *dev, int enable) { int ret = 0; const struct ov2640_config *cfg = dev->config; uint8_t reg; /* Switch to SENSOR register bank */ ret |= ov2640_write_reg(&cfg->i2c, BANK_SEL, BANK_SEL_SENSOR); /* Update REG04 to enable/disable horizontal mirror */ reg = ov2640_read_reg(&cfg->i2c, REG04); if (enable) { reg |= REG04_HFLIP_IMG; } else { reg &= ~REG04_HFLIP_IMG; } ret |= ov2640_write_reg(&cfg->i2c, REG04, reg); return ret; } static int ov2640_set_vertical_flip(const struct device *dev, int enable) { int ret = 0; const struct ov2640_config *cfg = dev->config; uint8_t reg; /* Switch to SENSOR register bank */ ret |= ov2640_write_reg(&cfg->i2c, BANK_SEL, BANK_SEL_SENSOR); /* Update REG04 to enable/disable vertical flip */ reg = ov2640_read_reg(&cfg->i2c, REG04); if (enable) { reg |= REG04_VFLIP_IMG | REG04_VREF_EN; } else { reg &= ~(REG04_VFLIP_IMG | REG04_VREF_EN); } ret |= ov2640_write_reg(&cfg->i2c, REG04, reg); return ret; } static int ov2640_set_resolution(const struct device *dev, uint16_t img_width, uint16_t img_height) { int ret = 0; const struct ov2640_config *cfg = dev->config; uint16_t w = img_width; uint16_t h = img_height; /* Disable DSP */ ret |= ov2640_write_reg(&cfg->i2c, BANK_SEL, BANK_SEL_DSP); ret |= ov2640_write_reg(&cfg->i2c, R_BYPASS, R_BYPASS_DSP_BYPAS); /* Write output width */ ret |= ov2640_write_reg(&cfg->i2c, ZMOW, (w >> 2) & 0xFF); /* OUTW[7:0] (real/4) */ ret |= ov2640_write_reg(&cfg->i2c, ZMOH, (h >> 2) & 0xFF); /* OUTH[7:0] (real/4) */ ret |= ov2640_write_reg(&cfg->i2c, ZMHH, ((h >> 8) & 0x04) | ((w>>10) & 0x03)); /* OUTH[8]/OUTW[9:8] */ /* Set CLKRC */ ret |= ov2640_write_reg(&cfg->i2c, BANK_SEL, BANK_SEL_SENSOR); ret |= ov2640_write_reg(&cfg->i2c, CLKRC, cfg->clock_rate_control); /* Write DSP input registers */ ov2640_write_all(dev, uxga_regs, ARRAY_SIZE(uxga_regs)); /* Enable DSP */ ret |= ov2640_write_reg(&cfg->i2c, BANK_SEL, BANK_SEL_DSP); ret |= ov2640_write_reg(&cfg->i2c, R_BYPASS, R_BYPASS_DSP_EN); k_msleep(30); return ret; } uint8_t ov2640_check_connection(const struct device *dev) { int ret = 0; const struct ov2640_config *cfg = dev->config; uint8_t reg_pid_val, reg_ver_val; ret |= ov2640_write_reg(&cfg->i2c, BANK_SEL, BANK_SEL_SENSOR); reg_pid_val = ov2640_read_reg(&cfg->i2c, REG_PID); reg_ver_val = ov2640_read_reg(&cfg->i2c, REG_VER); if (REG_PID_VAL != reg_pid_val || REG_VER_VAL != reg_ver_val) { LOG_ERR("OV2640 not detected\n"); return -ENODEV; } return ret; } static int ov2640_set_fmt(const struct device *dev, enum video_endpoint_id ep, struct video_format *fmt) { struct ov2640_data *drv_data = dev->data; uint16_t width, height; int ret = 0; int i = 0; /* We only support RGB565 and JPEG pixel formats */ if (fmt->pixelformat != VIDEO_PIX_FMT_RGB565 && fmt->pixelformat != VIDEO_PIX_FMT_JPEG) { LOG_ERR("ov2640 camera supports only RGB565 and JPG pixelformats!"); return -ENOTSUP; } width = fmt->width; height = fmt->height; if (!memcmp(&drv_data->fmt, fmt, sizeof(drv_data->fmt))) { /* nothing to do */ return 0; } drv_data->fmt = *fmt; /* Set output format */ ret |= ov2640_set_output_format(dev, fmt->pixelformat); /* Check if camera is capable of handling given format */ while (fmts[i].pixelformat) { if (fmts[i].width_min == width && fmts[i].height_min == height && fmts[i].pixelformat == fmt->pixelformat) { /* Set window size */ ret |= ov2640_set_resolution(dev, fmt->width, fmt->height); return ret; } i++; } /* Camera is not capable of handling given format */ LOG_ERR("Image format not supported\n"); return -ENOTSUP; } static int ov2640_get_fmt(const struct device *dev, enum video_endpoint_id ep, struct video_format *fmt) { struct ov2640_data *drv_data = dev->data; *fmt = drv_data->fmt; return 0; } static int ov2640_stream_start(const struct device *dev) { return 0; } static int ov2640_stream_stop(const struct device *dev) { return 0; } static int ov2640_get_caps(const struct device *dev, enum video_endpoint_id ep, struct video_caps *caps) { caps->format_caps = fmts; return 0; } static int ov2640_set_ctrl(const struct device *dev, unsigned int cid, void *value) { int ret = 0; switch (cid) { case VIDEO_CID_HFLIP: ret |= ov2640_set_horizontal_mirror(dev, (int)value); break; case VIDEO_CID_VFLIP: ret |= ov2640_set_vertical_flip(dev, (int)value); break; case VIDEO_CID_CAMERA_EXPOSURE: ret |= ov2640_set_exposure_ctrl(dev, (int)value); break; case VIDEO_CID_CAMERA_GAIN: ret |= ov2640_set_gain_ctrl(dev, (int)value); break; case VIDEO_CID_CAMERA_BRIGHTNESS: ret |= ov2640_set_brightness(dev, (int)value); break; case VIDEO_CID_CAMERA_SATURATION: ret |= ov2640_set_saturation(dev, (int)value); break; case VIDEO_CID_CAMERA_WHITE_BAL: ret |= ov2640_set_white_bal(dev, (int)value); break; case VIDEO_CID_CAMERA_CONTRAST: ret |= ov2640_set_contrast(dev, (int)value); break; case VIDEO_CID_CAMERA_TEST_PATTERN: ret |= ov2640_set_colorbar(dev, (int)value); break; case VIDEO_CID_CAMERA_QUALITY: ret |= ov2640_set_quality(dev, (int)value); break; default: return -ENOTSUP; } return ret; } static const struct video_driver_api ov2640_driver_api = { .set_format = ov2640_set_fmt, .get_format = ov2640_get_fmt, .get_caps = ov2640_get_caps, .stream_start = ov2640_stream_start, .stream_stop = ov2640_stream_stop, .set_ctrl = ov2640_set_ctrl, }; static int ov2640_init(const struct device *dev) { struct video_format fmt; int ret = 0; #if DT_INST_NODE_HAS_PROP(0, reset_gpios) const struct ov2640_config *cfg = dev->config; ret = gpio_pin_configure_dt(&cfg->reset_gpio, GPIO_OUTPUT_ACTIVE); if (ret) { return ret; } gpio_pin_set_dt(&cfg->reset_gpio, 0); k_sleep(K_MSEC(1)); gpio_pin_set_dt(&cfg->reset_gpio, 1); k_sleep(K_MSEC(1)); #endif ret = ov2640_check_connection(dev); if (ret) { return ret; } ov2640_soft_reset(dev); k_msleep(300); ov2640_write_all(dev, default_regs, ARRAY_SIZE(default_regs)); /* set default/init format SVGA RGB565 */ fmt.pixelformat = VIDEO_PIX_FMT_RGB565; fmt.width = SVGA_HSIZE; fmt.height = SVGA_VSIZE; fmt.pitch = SVGA_HSIZE * 2; ret = ov2640_set_fmt(dev, VIDEO_EP_OUT, &fmt); if (ret) { LOG_ERR("Unable to configure default format"); return -EIO; } ret |= ov2640_set_exposure_ctrl(dev, 1); ret |= ov2640_set_white_bal(dev, 1); return ret; } /* Unique Instance */ static const struct ov2640_config ov2640_cfg_0 = { .i2c = I2C_DT_SPEC_INST_GET(0), #if DT_INST_NODE_HAS_PROP(0, reset_gpios) .reset_gpio = GPIO_DT_SPEC_INST_GET(0, reset_gpios), #endif .clock_rate_control = DT_INST_PROP(0, clock_rate_control), }; static struct ov2640_data ov2640_data_0; static int ov2640_init_0(const struct device *dev) { const struct ov2640_config *cfg = dev->config; if (!device_is_ready(cfg->i2c.bus)) { LOG_ERR("Bus device is not ready"); return -ENODEV; } #if DT_INST_NODE_HAS_PROP(0, reset_gpios) if (!gpio_is_ready_dt(&cfg->reset_gpio)) { LOG_ERR("%s: device %s is not ready", dev->name, cfg->reset_gpio.port->name); return -ENODEV; } #endif uint32_t i2c_cfg = I2C_MODE_CONTROLLER | I2C_SPEED_SET(I2C_SPEED_STANDARD); if (i2c_configure(cfg->i2c.bus, i2c_cfg)) { LOG_ERR("Failed to configure ov2640 i2c interface."); } return ov2640_init(dev); } DEVICE_DT_INST_DEFINE(0, &ov2640_init_0, NULL, &ov2640_data_0, &ov2640_cfg_0, POST_KERNEL, CONFIG_VIDEO_INIT_PRIORITY, &ov2640_driver_api);