/* * Copyright (c) 2018-2020 Nordic Semiconductor ASA * Copyright (c) 2020 Circuit Dojo LLC * * SPDX-License-Identifier: Apache-2.0 */ #include "circuitdojo_feather_nrf9160_common-pinctrl.dtsi" #include / { model = "Circuit Dojo nRF9160 Feather"; compatible = "circuitdojo,feather-nrf9160"; chosen { zephyr,console = &uart0; zephyr,shell-uart = &uart0; zephyr,uart-mcumgr = &uart0; }; leds { compatible = "gpio-leds"; blue_led: led_0 { gpios = <&gpio0 3 GPIO_ACTIVE_LOW>; label = "Blue LED (D7)"; }; }; pwmleds { compatible = "pwm-leds"; pwm_led0: pwm_led_0 { pwms = <&pwm0 0 PWM_MSEC(20) PWM_POLARITY_INVERTED>; }; }; buttons { compatible = "gpio-keys"; button0: button_0 { gpios = <&gpio0 12 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>; label = "Switch 1"; zephyr,code = ; }; }; /* These aliases are provided for compatibility with samples */ aliases { led0 = &blue_led; bootloader-led0 = &blue_led; pwm-led0 = &pwm_led0; sw0 = &button0; mcuboot-button0 = &button0; mcuboot-led0 = &blue_led; watchdog0 = &wdt0; accel0 = &lis2dh; }; /* Used for accessing other pins */ feather_header: feather_connector { compatible = "adafruit-feather-header"; #gpio-cells = <2>; gpio-map-mask = <0xffffffff 0xffffffc0>; gpio-map-pass-thru = <0 0x3f>; gpio-map = <12 0 &gpio0 26 0>, /* SDA */ <13 0 &gpio0 27 0>, /* SCL */ <14 0 &gpio0 29 0>, /* PWM3 */ <15 0 &gpio0 30 0>, /* PWM3 */ <16 0 &gpio0 0 0>, /* PWM1 */ <17 0 &gpio0 1 0>, /* PWM1 */ <18 0 &gpio0 2 0>, /* PWM1 */ <19 0 &gpio0 3 0>, /* PWM0 */ <20 0 &gpio0 4 0>, /* PWM1 */ /* 11 not connected */ <10 0 &gpio0 24 0>, /* TX */ <9 0 &gpio0 23 0>, /* RX */ <8 0 &gpio0 22 0>, /* MISO */ <7 0 &gpio0 21 0>, /* MOSI */ <6 0 &gpio0 19 0>, /* SCK */ <5 0 &gpio0 18 0>, /* SS */ <4 0 &gpio0 17 0>, /* ADC4 = AIN6 */ <3 0 &gpio0 16 0>, /* ADC3 = AIN5 */ <2 0 &gpio0 15 0>, /* ADC2 = AIN4 */ <1 0 &gpio0 14 0>, /* ADC1 = AIN2 */ <0 0 &gpio0 13 0>; /* ADC0 = AIN1 */ }; nrf-ps-en { compatible = "regulator-fixed"; regulator-name = "nrf_ps_en"; enable-gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>; regulator-boot-on; }; }; &adc { status = "okay"; }; &gpiote { status = "okay"; }; &gpio0 { status = "okay"; }; &uart0 { status = "okay"; current-speed = <115200>; pinctrl-0 = <&uart0_default>; pinctrl-1 = <&uart0_sleep>; pinctrl-names = "default", "sleep"; }; &uart1 { current-speed = <115200>; pinctrl-0 = <&uart1_default>; pinctrl-1 = <&uart1_sleep>; pinctrl-names = "default", "sleep"; }; &uart2 { pinctrl-0 = <&uart2_default>; pinctrl-1 = <&uart2_sleep>; pinctrl-names = "default", "sleep"; }; &i2c1 { compatible = "nordic,nrf-twim"; status = "okay"; pinctrl-0 = <&i2c1_default>; pinctrl-1 = <&i2c1_sleep>; pinctrl-names = "default", "sleep"; pcf85063a@51 { compatible = "nxp,pcf85063a"; reg = <0x51>; }; lis2dh: lis2dh@18 { compatible = "st,lis2dh"; reg = <0x18>; irq-gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>; disconnect-sdo-sa0-pull-up; }; }; &pwm0 { status = "okay"; pinctrl-0 = <&pwm0_default>; pinctrl-1 = <&pwm0_sleep>; pinctrl-names = "default", "sleep"; }; &spi3 { compatible = "nordic,nrf-spim"; status = "okay"; cs-gpios = < &gpio0 7 GPIO_ACTIVE_LOW >; pinctrl-0 = <&spi3_default>; pinctrl-1 = <&spi3_sleep>; pinctrl-names = "default", "sleep"; w25q32jv: w25q32jv@0 { compatible = "jedec,spi-nor"; reg = < 0 >; spi-max-frequency = < 40000000 >; wp-gpios = < &gpio0 8 GPIO_ACTIVE_LOW >; hold-gpios = < &gpio0 10 GPIO_ACTIVE_LOW >; size = < 0x2000000 >; has-dpd; t-enter-dpd = < 3000 >; t-exit-dpd = < 30000 >; jedec-id = [ ef 40 16 ]; }; }; / { vbatt { compatible = "voltage-divider"; io-channels = <&adc 7>; output-ohms = <100000>; full-ohms = <(100000 + 100000)>; power-gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>; }; }; /* Include default memory partition configuration file */ #include