/*
 * Copyright (c) 2017 Intel Corporation
 *
 * SPDX-License-Identifier: Apache-2.0
 */

#ifndef __CC1200_H__
#define __CC1200_H__

#include <device.h>

/* RF settings
 *
 * First 42 entries are for the 42 first registers from
 * address 0x04 to 0x2D included.
 * Next, the last 58 entries are for the 58 registers from
 * extended address 0x00 to 0x39 included
 *
 * If CONFIG_IEEE802154_CC1200_RF_PRESET is not used, one will need
 * no provide 'cc1200_rf_settings' with proper settings. These can
 * be generated through TI's SmartRF application.
 *
 */
struct cc1200_rf_registers_set {
	u32_t chan_center_freq0;
	u16_t channel_limit;
	/* to fit in u16_t, spacing is a multiple of 100 Hz,
	 * 12.5KHz for instance will be 125.
	 */
	u16_t channel_spacing;
	u8_t registers[100];
};

#ifndef CONFIG_IEEE802154_CC1200_RF_PRESET
extern const struct cc1200_rf_registers_set cc1200_rf_settings;
#endif

/* Note for EMK & EM adapter booster pack users:
 * SPI pins are easy, RESET as well, but when it comes to GPIO:
 * CHIP -> EM adapter
 * GPIO0 -> GPIOA
 * GPIO1 -> reserved (it's SPI MISO)
 * GPIO2 -> GPIOB
 * GPIO3 -> GPIO3
 */

enum cc1200_gpio_index {
	CC1200_GPIO_IDX_GPIO0,
	CC1200_GPIO_IDX_MAX,
};

struct cc1200_gpio_configuration {
	struct device *dev;
	u32_t pin;
};

struct cc1200_gpio_configuration *cc1200_configure_gpios(void);

#endif /* __CC1200_H__ */