/*
 * Copyright (c) 2019-2022 Actinius
 *
 * SPDX-License-Identifier: Apache-2.0
 */
#include "actinius_icarus_common-pinctrl.dtsi"
#include <zephyr/dt-bindings/input/input-event-codes.h>

/ {
	model = "Actinius Icarus IoT Dev Board";
	compatible = "actinius,icarus";

	chosen {
		zephyr,console = &uart0;
		zephyr,shell-uart = &uart0;
		zephyr,uart-mcumgr = &uart0;
	};

	leds {
		compatible = "gpio-leds";

		red_led: led_0 {
			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
			label = "Red LED";
		};

		green_led: led_1 {
			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
			label = "Green LED";
		};

		blue_led: led_2 {
			gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
			label = "Blue LED";
		};
	};

	pwmleds {
		compatible = "pwm-leds";

		red_pwm_led: led_pwm_0 {
			pwms = <&pwm0 0 PWM_MSEC(20) PWM_POLARITY_INVERTED>;
			label = "Red PWM LED";
		};

		green_pwm_led: led_pwm_1 {
			pwms = <&pwm0 1 PWM_MSEC(20) PWM_POLARITY_INVERTED>;
			label = "Green PWM LED";
		};

		blue_pwm_led: led_pwm_2 {
			pwms = <&pwm0 2 PWM_MSEC(20) PWM_POLARITY_INVERTED>;
			label = "Blue PWM LED";
		};
	};

	buttons {
		compatible = "gpio-keys";

		button0: button_0 {
			gpios = <&gpio0 5 (GPIO_PULL_UP | GPIO_ACTIVE_LOW)>;
			label = "Push Button 1";
			zephyr,code = <INPUT_KEY_0>;
		};
	};

	aliases {
		led0 = &red_led;
		led1 = &green_led;
		led2 = &blue_led;
		pwm-led0 = &red_pwm_led;
		pwm-led1 = &green_pwm_led;
		pwm-led2 = &blue_pwm_led;
		red-pwm-led = &red_pwm_led;
		green-pwm-led = &green_pwm_led;
		blue-pwm-led = &blue_pwm_led;
		sw0 = &button0;
		bootloader-led0 = &blue_led;
		mcuboot-button0 = &button0;
		mcuboot-led0 = &blue_led;
		watchdog0 = &wdt0;
		accel0 = &lis2dh12_accel;
	};

	vbatt {
		compatible = "voltage-divider";
		io-channels = <&adc 0>;
		output-ohms = <10000000>;
		full-ohms = <(10000000 + 4700000)>;
	};

	sim_select: sim-select {
		compatible = "actinius-sim-select";
		sim-gpios = <&gpio0 8 GPIO_ACTIVE_HIGH>;
		sim = "esim";
	};
};

&adc {
	status ="okay";
};

&gpiote {
	status = "okay";
};

&gpio0 {
	status = "okay";
};

&uart0 {
	status = "okay";

	current-speed = <115200>;
	pinctrl-0 = <&uart0_default>;
	pinctrl-1 = <&uart0_sleep>;
	pinctrl-names = "default", "sleep";
};

&uart1 {
	status = "okay";

	current-speed = <115200>;
	pinctrl-0 = <&uart1_default>;
	pinctrl-1 = <&uart1_sleep>;
	pinctrl-names = "default", "sleep";
};

&uart2 {
	current-speed = <115200>;
	pinctrl-0 = <&uart2_default>;
	pinctrl-1 = <&uart2_sleep>;
	pinctrl-names = "default", "sleep";
};

&i2c2 {
	compatible = "nordic,nrf-twim";
	status = "okay";

	clock-frequency = <I2C_BITRATE_FAST>;

	pinctrl-0 = <&i2c2_default>;
	pinctrl-1 = <&i2c2_sleep>;
	pinctrl-names = "default", "sleep";
	lis2dh12_accel: lis2dh12-accel@19 {
		compatible = "st,lis2dh12", "st,lis2dh";
		reg = <0x19>;
		irq-gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>,
			  <&gpio0 29 GPIO_ACTIVE_HIGH>;
	};
};

&spi3 {
	compatible = "nordic,nrf-spim";
	status = "okay";

	pinctrl-0 = <&spi3_default>;
	pinctrl-1 = <&spi3_sleep>;
	pinctrl-names = "default", "sleep";
};

&pwm0 {
	status = "okay";
	pinctrl-0 = <&pwm0_default>;
	pinctrl-1 = <&pwm0_sleep>;
	pinctrl-names = "default", "sleep";
};

/* Include file with mappings and aliases for feather compatibility */
#include "feather_connector.dtsi"

/* Include default memory partition configuration file */
#include <common/nordic/nrf91xx_partition.dtsi>