#include "armv6-m.dtsi" #include #include #include / { cpus { #address-cells = <1>; #size-cells = <0>; cpu@0 { device_type = "cpu"; compatible = "arm,cortex-m0+"; reg = <0>; }; }; sram0: memory@1FFFF000 { device_type = "memory"; compatible = "mmio-sram"; reg = <0x1FFFF000 0x4000>; }; soc { flash-controller@40020000 { compatible = "nxp,kinetis-ftfa"; label = "FLASH_CTRL"; reg = <0x40020000 0x14>; interrupts = <5 0>; #address-cells = <1>; #size-cells = <1>; flash0: flash@0 { compatible = "soc-nv-flash"; label = "MCUX_FLASH"; reg = <0 0x20000>; erase-block-size = <1024>; write-block-size = <4>; }; }; i2c0: i2c@40066000 { compatible = "nxp,kinetis-i2c"; clock-frequency = ; #address-cells = <1>; #size-cells = <0>; reg = <0x40066000 0x1000>; interrupts = <8 0>; clocks = <&sim KINETIS_SIM_BUS_CLK 0x1034 6>; label = "I2C_0"; status = "disabled"; }; i2c1: i2c@40067000 { compatible = "nxp,kinetis-i2c"; clock-frequency = ; #address-cells = <1>; #size-cells = <0>; reg = <0x40067000 0x1000>; interrupts = <9 0>; clocks = <&sim KINETIS_SIM_BUS_CLK 0x1034 7>; label = "I2C_1"; status = "disabled"; }; sim: sim@40047000 { compatible = "nxp,kinetis-sim"; reg = <0x40047000 0x1060>; label = "SIM"; clk-divider-core = <1>; clk-divider-bus = <2>; clk-divider-flexbus = <3>; clk-divider-flash = <5>; clock-controller; #clock-cells = <3>; }; uart0: uart@4006A000 { compatible = "nxp,kinetis-lpsci"; reg = <0x4006A000 0xc>; interrupts = <12 0>; clocks = <&sim KINETIS_SIM_CORESYS_CLK 0x1034 10>; label = "UART_0"; status = "disabled"; }; adc0: adc@4003b000{ compatible = "nxp,kinetis-adc16"; reg = <0x4003b000 0x70>; interrupts = <15 0>; label = "ADC_0"; status = "disabled"; }; gpioa: gpio@400ff000 { compatible = "nxp,kinetis-gpio"; reg = <0x400ff000 0x40>; interrupts = <30 2>; label = "GPIO_0"; gpio-controller; #gpio-cells = <2>; }; gpiob: gpio@400ff040 { compatible = "nxp,kinetis-gpio"; reg = <0x400ff040 0x40>; label = "GPIO_1"; gpio-controller; #gpio-cells = <2>; }; gpioc: gpio@400ff080 { compatible = "nxp,kinetis-gpio"; reg = <0x400ff080 0x40>; label = "GPIO_2"; gpio-controller; #gpio-cells = <2>; }; gpiod: gpio@400ff0c0 { compatible = "nxp,kinetis-gpio"; reg = <0x400ff0c0 0x40>; interrupts = <31 2>; label = "GPIO_3"; gpio-controller; #gpio-cells = <2>; }; gpioe: gpio@400ff100 { compatible = "nxp,kinetis-gpio"; reg = <0x400ff100 0x40>; label = "GPIO_4"; gpio-controller; #gpio-cells = <2>; }; }; }; &nvic { arm,num-irq-priority-bits = <2>; };