/*
 * Copyright (c) 2022-2023, NXP
 *
 * SPDX-License-Identifier: Apache-2.0
 */

#ifndef ZEPHYR_SOC_ARM64_NXP_IMX9_PINCTRL_SOC_H_
#define ZEPHYR_SOC_ARM64_NXP_IMX9_PINCTRL_SOC_H_

#include <zephyr/devicetree.h>
#include <zephyr/types.h>
#include "fsl_common.h"

#ifdef __cplusplus
extern "C" {
#endif

#define MCUX_IMX_INPUT_SCHMITT_ENABLE_SHIFT IOMUXC1_SW_PAD_CTL_PAD_HYS_SHIFT
#define MCUX_IMX_DRIVE_OPEN_DRAIN_SHIFT     IOMUXC1_SW_PAD_CTL_PAD_OD_SHIFT
#define MCUX_IMX_BIAS_PULL_DOWN_SHIFT       IOMUXC1_SW_PAD_CTL_PAD_PD_SHIFT
#define MCUX_IMX_BIAS_PULL_UP_SHIFT         IOMUXC1_SW_PAD_CTL_PAD_PU_SHIFT
#define MCUX_IMX_SLEW_RATE_SHIFT            IOMUXC1_SW_PAD_CTL_PAD_FSEL1_SHIFT
#define MCUX_IMX_DRIVE_STRENGTH_SHIFT       IOMUXC1_SW_PAD_CTL_PAD_DSE_SHIFT
#define MCUX_IMX_INPUT_ENABLE_SHIFT         23 /* Shift to a bit not used by IOMUXC_SW_PAD_CTL */
#define MCUX_IMX_INPUT_ENABLE(x)            ((x >> MCUX_IMX_INPUT_ENABLE_SHIFT) & 0x1)

#define Z_PINCTRL_MCUX_IMX_PINCFG_INIT(node_id)                                                    \
	((DT_PROP(node_id, input_schmitt_enable) << MCUX_IMX_INPUT_SCHMITT_ENABLE_SHIFT) |         \
	 (DT_PROP(node_id, drive_open_drain) << MCUX_IMX_DRIVE_OPEN_DRAIN_SHIFT) |                 \
	 (DT_PROP(node_id, bias_pull_down) << MCUX_IMX_BIAS_PULL_DOWN_SHIFT) |                     \
	 (DT_PROP(node_id, bias_pull_up) << MCUX_IMX_BIAS_PULL_UP_SHIFT) |                         \
	 (DT_ENUM_IDX(node_id, slew_rate) << MCUX_IMX_SLEW_RATE_SHIFT) |                           \
	 ((~(0xff << DT_ENUM_IDX(node_id, drive_strength))) << MCUX_IMX_DRIVE_STRENGTH_SHIFT) |    \
	 (DT_PROP(node_id, input_enable) << MCUX_IMX_INPUT_ENABLE_SHIFT))

/* This struct must be present. It is used by the mcux gpio driver */
struct pinctrl_soc_pinmux {
	uint32_t mux_register;    /*!< IOMUXC SW_PAD_MUX register */
	uint32_t config_register; /*!< IOMUXC SW_PAD_CTL register */
	uint32_t input_register;  /*!< IOMUXC SELECT_INPUT DAISY register */
	uint8_t mux_mode: 4;      /*!< Mux value for SW_PAD_MUX register */
	uint32_t input_daisy: 4;  /*!< Mux value for SELECT_INPUT_DAISY register */
};

struct pinctrl_soc_pin {
	struct pinctrl_soc_pinmux pinmux;
	uint32_t pin_ctrl_flags; /*!< value to write to IOMUXC_SW_PAD_CTL register */
};

typedef struct pinctrl_soc_pin pinctrl_soc_pin_t;

/* This definition must be present. It is used by the mcux gpio driver */
#define MCUX_IMX_PINMUX(node_id)                                                                   \
	{                                                                                          \
		.mux_register = DT_PROP_BY_IDX(node_id, pinmux, 0),                                \
		.config_register = DT_PROP_BY_IDX(node_id, pinmux, 4),                             \
		.input_register = DT_PROP_BY_IDX(node_id, pinmux, 2),                              \
		.mux_mode = DT_PROP_BY_IDX(node_id, pinmux, 1),                                    \
		.input_daisy = DT_PROP_BY_IDX(node_id, pinmux, 3),                                 \
	}

#define Z_PINCTRL_PINMUX(group_id, pin_prop, idx)                                                  \
	MCUX_IMX_PINMUX(DT_PHANDLE_BY_IDX(group_id, pin_prop, idx))

#define Z_PINCTRL_STATE_PIN_INIT(group_id, pin_prop, idx)                                          \
	{                                                                                          \
		.pinmux = Z_PINCTRL_PINMUX(group_id, pin_prop, idx),                               \
		.pin_ctrl_flags = Z_PINCTRL_MCUX_IMX_PINCFG_INIT(group_id),                        \
	},

#define Z_PINCTRL_STATE_PINS_INIT(node_id, prop)                                                   \
	{DT_FOREACH_CHILD_VARGS(DT_PHANDLE(node_id, prop), DT_FOREACH_PROP_ELEM, pinmux,           \
				Z_PINCTRL_STATE_PIN_INIT)};

#ifdef __cplusplus
}
#endif

#endif /* ZEPHYR_SOC_ARM64_NXP_IMX9_PINCTRL_SOC_H_ */