--- title: version: 0.1 description: > Describe in free form text w/ spanning lines what you are describing < parent | child >: # parent/child is used to document implicit relation between nodes. # This information is required to generate parent related bits in child # attributes. # In case parent has 'bus', slave inherits some information from master. # parent and child should share same bus-type value. bus: <bus-type> # properties will be the contents of the device tree node # property names must match the property names in the DT properties: # A typical property entry will look like the following # <name of property as it is in device tree> # category: <required | optional> # type: <string | int | array> # description: <description of property> # generation: <define | structure> # At a minimum, the compatible is required for matching nodes compatible: <list of string compatible matches> category: required type: string description: compatible of node # reg is used to denote mmio registers reg: type: array description: mmio register space generation: define category: required # interrupts specifies the interrupts that the driver may utilize interrupts: type: array category: required description: required interrupts generation: define # If a node is a interrupt controller, gpio controller, pinmux device # or any device which is referenced via phandle plus some number of cells # then the cell fiels below must be present. "#cells": - cell0 # name of first cell - cell1 # name of second cell - cell2 # name of third cell - and so on and so forth ...