/* * Copyright (c) 2018, Nordic Semiconductor ASA * * SPDX-License-Identifier: Apache-2.0 */ #include #include #define LOG_DOMAIN "spi_nrfx_spis" #define LOG_LEVEL CONFIG_SPI_LOG_LEVEL #include LOG_MODULE_REGISTER(spi_nrfx_spis); #include "spi_context.h" struct spi_nrfx_data { struct spi_context ctx; }; struct spi_nrfx_config { nrfx_spis_t spis; size_t max_buf_len; }; static inline nrf_spis_mode_t get_nrf_spis_mode(uint16_t operation) { if (SPI_MODE_GET(operation) & SPI_MODE_CPOL) { if (SPI_MODE_GET(operation) & SPI_MODE_CPHA) { return NRF_SPIS_MODE_3; } else { return NRF_SPIS_MODE_2; } } else { if (SPI_MODE_GET(operation) & SPI_MODE_CPHA) { return NRF_SPIS_MODE_1; } else { return NRF_SPIS_MODE_0; } } } static inline nrf_spis_bit_order_t get_nrf_spis_bit_order(uint16_t operation) { if (operation & SPI_TRANSFER_LSB) { return NRF_SPIS_BIT_ORDER_LSB_FIRST; } else { return NRF_SPIS_BIT_ORDER_MSB_FIRST; } } static int configure(const struct device *dev, const struct spi_config *spi_cfg) { const struct spi_nrfx_config *config = dev->config; struct spi_nrfx_data *data = dev->data; struct spi_context *ctx = &data->ctx; if (spi_context_configured(ctx, spi_cfg)) { /* Already configured. No need to do it again. */ return 0; } if (spi_cfg->operation & SPI_HALF_DUPLEX) { LOG_ERR("Half-duplex not supported"); return -ENOTSUP; } if (SPI_OP_MODE_GET(spi_cfg->operation) == SPI_OP_MODE_MASTER) { LOG_ERR("Master mode is not supported on %s", dev->name); return -EINVAL; } if (spi_cfg->operation & SPI_MODE_LOOP) { LOG_ERR("Loopback mode is not supported"); return -EINVAL; } if (IS_ENABLED(CONFIG_SPI_EXTENDED_MODES) && (spi_cfg->operation & SPI_LINES_MASK) != SPI_LINES_SINGLE) { LOG_ERR("Only single line mode is supported"); return -EINVAL; } if (SPI_WORD_SIZE_GET(spi_cfg->operation) != 8) { LOG_ERR("Word sizes other than 8 bits are not supported"); return -EINVAL; } if (spi_cfg->cs) { LOG_ERR("CS control via GPIO is not supported"); return -EINVAL; } ctx->config = spi_cfg; nrf_spis_configure(config->spis.p_reg, get_nrf_spis_mode(spi_cfg->operation), get_nrf_spis_bit_order(spi_cfg->operation)); return 0; } static void prepare_for_transfer(const struct device *dev, const uint8_t *tx_buf, size_t tx_buf_len, uint8_t *rx_buf, size_t rx_buf_len) { struct spi_nrfx_data *dev_data = dev->data; const struct spi_nrfx_config *dev_config = dev->config; int status; if (tx_buf_len > dev_config->max_buf_len || rx_buf_len > dev_config->max_buf_len) { LOG_ERR("Invalid buffer sizes: Tx %d/Rx %d", tx_buf_len, rx_buf_len); status = -EINVAL; } else { nrfx_err_t result; result = nrfx_spis_buffers_set(&dev_config->spis, tx_buf, tx_buf_len, rx_buf, rx_buf_len); if (result == NRFX_SUCCESS) { return; } status = -EIO; } spi_context_complete(&dev_data->ctx, status); } static int transceive(const struct device *dev, const struct spi_config *spi_cfg, const struct spi_buf_set *tx_bufs, const struct spi_buf_set *rx_bufs, bool asynchronous, struct k_poll_signal *signal) { struct spi_nrfx_data *dev_data = dev->data; int error; spi_context_lock(&dev_data->ctx, asynchronous, signal, spi_cfg); error = configure(dev, spi_cfg); if (error != 0) { /* Invalid configuration. */ } else if ((tx_bufs && tx_bufs->count > 1) || (rx_bufs && rx_bufs->count > 1)) { LOG_ERR("Scattered buffers are not supported"); error = -ENOTSUP; } else if (tx_bufs && tx_bufs->buffers[0].len && !nrfx_is_in_ram(tx_bufs->buffers[0].buf)) { LOG_ERR("Only buffers located in RAM are supported"); error = -ENOTSUP; } else { prepare_for_transfer(dev, tx_bufs ? tx_bufs->buffers[0].buf : NULL, tx_bufs ? tx_bufs->buffers[0].len : 0, rx_bufs ? rx_bufs->buffers[0].buf : NULL, rx_bufs ? rx_bufs->buffers[0].len : 0); error = spi_context_wait_for_completion(&dev_data->ctx); } spi_context_release(&dev_data->ctx, error); return error; } static int spi_nrfx_transceive(const struct device *dev, const struct spi_config *spi_cfg, const struct spi_buf_set *tx_bufs, const struct spi_buf_set *rx_bufs) { return transceive(dev, spi_cfg, tx_bufs, rx_bufs, false, NULL); } #ifdef CONFIG_SPI_ASYNC static int spi_nrfx_transceive_async(const struct device *dev, const struct spi_config *spi_cfg, const struct spi_buf_set *tx_bufs, const struct spi_buf_set *rx_bufs, struct k_poll_signal *async) { return transceive(dev, spi_cfg, tx_bufs, rx_bufs, true, async); } #endif /* CONFIG_SPI_ASYNC */ static int spi_nrfx_release(const struct device *dev, const struct spi_config *spi_cfg) { struct spi_nrfx_data *dev_data = dev->data; if (!spi_context_configured(&dev_data->ctx, spi_cfg)) { return -EINVAL; } spi_context_unlock_unconditionally(&dev_data->ctx); return 0; } static const struct spi_driver_api spi_nrfx_driver_api = { .transceive = spi_nrfx_transceive, #ifdef CONFIG_SPI_ASYNC .transceive_async = spi_nrfx_transceive_async, #endif .release = spi_nrfx_release, }; static void event_handler(const nrfx_spis_evt_t *p_event, void *p_context) { struct spi_nrfx_data *dev_data = p_context; if (p_event->evt_type == NRFX_SPIS_XFER_DONE) { spi_context_complete(&dev_data->ctx, p_event->rx_amount); } } static int init_spis(const struct device *dev, const nrfx_spis_config_t *config) { const struct spi_nrfx_config *dev_config = dev->config; struct spi_nrfx_data *dev_data = dev->data; /* This sets only default values of mode and bit order. The ones to be * actually used are set in configure() when a transfer is prepared. */ nrfx_err_t result = nrfx_spis_init(&dev_config->spis, config, event_handler, dev_data); if (result != NRFX_SUCCESS) { LOG_ERR("Failed to initialize device: %s", dev->name); return -EBUSY; } spi_context_unlock_unconditionally(&dev_data->ctx); return 0; } /* * Current factors requiring use of DT_NODELABEL: * * - NRFX_SPIS_INSTANCE() requires an SoC instance number * - soc-instance-numbered kconfig enables * - ORC is a SoC-instance-numbered kconfig option instead of a DT property */ #define SPIS(idx) DT_NODELABEL(spi##idx) #define SPIS_PROP(idx, prop) DT_PROP(SPIS(idx), prop) #define SPI_NRFX_SPIS_DEVICE(idx) \ static int spi_##idx##_init(const struct device *dev) \ { \ IRQ_CONNECT(DT_IRQN(SPIS(idx)), DT_IRQ(SPIS(idx), priority), \ nrfx_isr, nrfx_spis_##idx##_irq_handler, 0); \ const nrfx_spis_config_t config = { \ .sck_pin = SPIS_PROP(idx, sck_pin), \ .mosi_pin = SPIS_PROP(idx, mosi_pin), \ .miso_pin = SPIS_PROP(idx, miso_pin), \ .csn_pin = SPIS_PROP(idx, csn_pin), \ .mode = NRF_SPIS_MODE_0, \ .bit_order = NRF_SPIS_BIT_ORDER_MSB_FIRST, \ .csn_pullup = NRF_GPIO_PIN_NOPULL, \ .miso_drive = NRF_GPIO_PIN_S0S1, \ .orc = CONFIG_SPI_##idx##_NRF_ORC, \ .def = SPIS_PROP(idx, def_char), \ }; \ return init_spis(dev, &config); \ } \ static struct spi_nrfx_data spi_##idx##_data = { \ SPI_CONTEXT_INIT_LOCK(spi_##idx##_data, ctx), \ SPI_CONTEXT_INIT_SYNC(spi_##idx##_data, ctx), \ }; \ static const struct spi_nrfx_config spi_##idx##z_config = { \ .spis = NRFX_SPIS_INSTANCE(idx), \ .max_buf_len = BIT_MASK(SPIS##idx##_EASYDMA_MAXCNT_SIZE), \ }; \ DEVICE_DT_DEFINE(SPIS(idx), \ spi_##idx##_init, \ NULL, \ &spi_##idx##_data, \ &spi_##idx##z_config, \ POST_KERNEL, \ CONFIG_SPI_INIT_PRIORITY, \ &spi_nrfx_driver_api) #ifdef CONFIG_SPI_0_NRF_SPIS SPI_NRFX_SPIS_DEVICE(0); #endif #ifdef CONFIG_SPI_1_NRF_SPIS SPI_NRFX_SPIS_DEVICE(1); #endif #ifdef CONFIG_SPI_2_NRF_SPIS SPI_NRFX_SPIS_DEVICE(2); #endif #ifdef CONFIG_SPI_3_NRF_SPIS SPI_NRFX_SPIS_DEVICE(3); #endif